STGF17NC60SD
17 A, 600 V fast IGBT with Ultrafast diode
Datasheet
−
production data
Features
■
■
■
■
Very low on-voltage drop (V
CE(sat)
)
Minimum power losses at 5 kHz in hard switching
Optimized performance for medium operating frequencies
IGBT co-packaged with Ultrafast freewheeling diode
Application
Electronic light dimmer
Description
This high voltage and fast IGBT shows an excellent compromise between low conduction loss and fast switching performance. It is designed in PowerMESH™ technology combined with Ultrafast diode.
1
2
3
TO-220FP
Figure 1.
Internal schematic diagram
Obsolete Product(s) - Obsolete Product(s)
Table 1.
Device summary
Order code
STGF17NC60SD
Marking
GF17NC60SD
November 2012
This is information on a product in full production.
Doc ID 018834 Rev 1
Package
TO-220FP
Packaging
Tube
1/9 www.st.com
9
Electrical ratings STGF17NC60SD
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
CES
I
C
(1)
I
C
(1)
I
CP
(2)
I
CL
(3)
I
F
Collector-emitter voltage (V
Pulsed collector current
Turn-off latching current
GE
= 0)
Continuous collector current at T
Continuous collector current at T
C
C
= 25°C
= 100°C
I
FSM
Diode RMS forward current at T
C
= 25°C
Surge non repetitive forward current t p
= 10 ms sinusoidal
Gate-emitter voltage V
GE
V
ISO
P
TOT
T j
Insulation withstand voltage (RMS) from all three leads to external heat sink
(t = 1 s; T
C
= 25°C)
Total dissipation at T
C
= 25°C
Operating junction temperature
1.
Calculated according to the iterative formula
I
C
(
T
C
)
=
R thj – c
× V
T
) ( max
–
)
(
T
C
T j max )
, I
C
( T
C
) )
2.
Pulse width limited by maximum junction temperature and turn-off within RBSOA
3.
Vclamp = 80% of V
CES
, T j
= 150 °C, R
G
= 10
Ω
, V
GE
= 15 V
Value
600
17
11
80
80
20
50
±20
2500
32
- 55 to 150
Table 3.
Symbol
Thermal data
Parameter Value Unit
Thermal resistance junction-case IGBT 3.9
°C/W
R thj-c
Thermal resistance junction-case diode 5.5
°C/W
R thj -a
Thermal resistance junction-ambient 62.5
°C/W Obsolete Product(s) - Obsolete Product(s)
V
W
°C
Unit
A
A
A
V
A
A
A
V
2/9 Doc ID 018834 Rev 1
STGF17NC60SD Electrical characteristics
T j
= 25°C unless otherwise specified.
Table 4.
Symbol
Static
Parameter Test conditions
V
(BR)CES
V
V
CE(sat)
I
I
GE(th)
CES
GES g fs
Collector-emitter breakdown voltage
(V
GE
= 0)
I
C
= 1 mA
Collector-emitter saturation voltage
V
GE
= 15 V, I
C
= 12 A
V
GE
= 15 V, I
C
= 12 A,
T j
=125°C
Gate threshold voltage
Collector cut-off current
(V
GE
= 0)
Gate-emitter leakage current (V
CE
= 0)
V
CE
= V
GE
, I
C
= 250 µA
V
V
V
CE
CE
GE
= 600 V
= 600 V, T j
=125°C
= ±20 V, V
CE
= 0
Forward transconductance V
CE
= 15 V
,
I
C
= 12 A
Min.
Typ.
Max.
Unit
600 V
4.2
1.55
1.35
10
1.9
6.2
150
1
V
V
V
µA mA
±100 nA
S
Table 5.
Symbol
C ies
C oes
C res
Q g
Q ge
Q gc
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Test conditions
V
CE
= 25 V, f = 1 MHz,
V
GE
= 0
V
CE
= 480 V, I
C
= 12 A,
V
GE
= 15 V, Figure 3
Min.
Typ.
Max.
Unit
-
-
1190
135
28.5
54.5
8.7
25.8
-
pF pF pF nC nC nC
Table 6.
Symbol
Switching on/off (inductive load)
Parameter Test conditions Min.
Typ.
Max.
Unit
Turn-on delay time 17.5
ns t d(on)
V
CC
= 480 V, I
C
= 12 A
R
G
= 10 Ω , V
GE
= 15 V, t r
Current rise time 6.2
Obsolete Product(s) - Obsolete Product(s)
ns
A/µs t d(on)
Turn-on delay time V
CC
= 480 V, I
C
= 12 A
R
G
= 10 Ω , V
GE
= 15 V,
17 ns t r
Current rise time 6.5
ns
T j
= 125°C,
Figure 4
(di/dt)on Turn-on current slope 1700 A/µs t r(Voff) t d(Voff) t f
Off voltage rise time
Turn-off delay time
Current fall time
V
CC
= 480 V, I
C
= 12 A
R
G
= 10
Ω
, V
GE
= 15 V,
Figure 4
-
90
175
215
ns ns ns t r(Voff) t d(Voff) t f
Off voltage rise time
Turn-off delay time
Current fall time
V
CC
= 480 V, I
C
= 12 A
R
G
= 10 Ω , V
GE
= 15 V,
T j
= 125°C, Figure 4
-
155
245
290
ns ns ns
Doc ID 018834 Rev 1 3/9
Electrical characteristics
Table 7.
Symbol
Switching energy (inductive load)
Parameter Test conditions
E on
E off
(1)
E ts
E
E off
(1)
E on ts
Turn-on switching losses
Turn-off switching losses
Total switching losses
Turn-on switching losses
Turn-off switching losses
Total switching losses
V
CC
R
G
= 480 V, I
C
= 10 Ω , V
GE
Figure 2
= 12 A
= 15 V,
V
CC
= 480 V, I
C
= 12 A
R
G
= 10
Ω
, V
GE
= 15 V,
T j
= 125 °C,
Figure 2
1.
Turn-off losses include also the tail of the collector current
STGF17NC60SD
Min.
Typ.
Max.
Unit
-
-
135
815
995
200
1175
1375
-
-
µJ
µJ
µJ
µJ
µJ
µJ
Table 8.
Symbol
V
F t rr
Q rr
I rrm t rr
Q rr
I rrm
Collector-emitter diode
Parameter
Forward on-voltage
Test conditions
I
F
= 12 A
I
F
= 12 A, T j
= 125 °C
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
F
= 12 A, V
R
=40 V,
di/dt=100 A/µs, Figure 5
I
F
= 12 A, V
R
=40 V, di/dt=100 A/µs, T j
= 125 °C
Figure 5
Min.
Typ.
Max.
Unit
2.3
2.0
31
29.5
1.9
48.5
70.5
3
V
V ns nC
A ns nC
A
Obsolete Product(s) - Obsolete Product(s)
4/9 Doc ID 018834 Rev 1
STGF17NC60SD
3 Test circuits
Figure 2.
Test circuit for inductive load switching
Figure 3.
Gate charge test circuit
Test circuits
Figure 4.
V
CE
V
G
Switching waveform
I C
Td(on)
Ton
Tr(Ion)
90 %
10 %
Tr(Voff)
Tcro ss
Td(off)
Toff
Tf
90 %
10 %
AM01504v1 AM01505v1
Figure 5.
Diode recovery time waveform di/dt Q rr
I
F
90 %
10 % t a t rr t b
I
RRM
I
RRM t
V
F dv/dt
AM01506v1 AM01507v1
Obsolete Product(s) - Obsolete Product(s)
Doc ID 018834 Rev 1 5/9
Package mechanical data
4 Package mechanical data
STGF17NC60SD
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK is an ST trademark.
Obsolete Product(s) - Obsolete Product(s)
6/9 Doc ID 018834 Rev 1
STGF17NC60SD
Table 9.
TO-220FP mechanical data
Dim.
G1
H
L2
L3
L4
L5
L6
L7
Dia
E
F
F1
F2
G
A
B
D
28.6
9.8
2.9
15.9
9
3
Figure 6.
TO-220FP drawing
Min.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
L7
A
B
Di a
L6 mm
Typ.
16
L5
D
Package mechanical data
E
Max.
4.6
2.7
2.75
0.7
1
1.70
1.70
5.2
2.7
10.4
30.6
10.6
3.6
16.4
9.3
3.2
H
G1
G
L2
L 3
Doc ID 018834 Rev 1
L4
7012510_Rev_K
7/9
Revision history
Table 10.
Document revision history
Date Revision
14-Nov-2012 1 First release
Changes
STGF17NC60SD
Obsolete Product(s) - Obsolete Product(s)
8/9 Doc ID 018834 Rev 1
STGF17NC60SD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 018834 Rev 1 9/9
