TN4015H-6G
High temperature 40 A SCRs
Datasheet - production data
G
A
K
A
K
G
D²PAK
A
Features
High junction temperature: T j
= 150 °C
High noise immunity dV/dt = 500 V/µs up to
150 °C
Gate triggering current I
GT
Off-state voltage 600 V V
= 15 mA
DRM
/V
RRM
High turn on current rise dI/dt = 100 A/µs
ECOPACK ® 2 compliant component
Applications
Motorbike voltage regulator circuits
Inrush current limiting circuit
Motor control circuits and starters
Solid state relays
Description
Thanks to its junction temperature T j
up to
150 °C, the device offers high thermal performance operation up to 40 A. Its D²PAK package allows modern SMD designs as well as compact back to back configuration.
Its tradeoff noise immunity (dV/dt = 500 V/μs) versus its gate triggering current (I
GT
= 15 mA) and its turnon current rise (dI/dt = 100 A/μs) allow to design robust and compact control circuit for voltage regulator in motorbikes and industrial drives, overvoltage crowbar protection, motor control circuits in power tools and kitchen appliances, inrush current limiting circuits.
Order code
Table 1: Device summary
Package V
DRM
/V
RRM
I
GT
TN4015H-6G D²PAK 600 V 15 mA
May 2017 DocID029588 Rev 2
This is information on a product in full production.
1/10 www.st.com
Characteristics
1 Characteristics
TN4015H-6G
Table 2: Absolute maximum ratings (limiting values), T j
= 25 °C unless otherwise specified
Symbol Parameter Value Unit
I
T(RMS)
RMS on-state current
(180 ° conduction angle)
T c
= 119 °C 40 A
I
T(AV)
I
TSM
Average on-state current
(180 ° conduction angle)
Non repetitive surge peak on-state current
I 2 t I 2 t value for fusing dl/dt
Critical rate of rise of on-state current
I
G
= 2 x I
GT
, tr ≤ 100 ns
V
DRM
/V
RRM
Repetitive peak off-state voltage
V
DSM
/V
RSM
Non repetitive surge peak off-state voltage
I
GM
Peak gate current t p
= 20 µs
P
G(AV)
Average gate power dissipation
V
RGM
T stg
T j
Maximum peak reverse gate voltage
Storage junction temperature range
Maximum operating junction temperature
T c
= 120 °C
T c
= 125 °C
T c
= 128 °C t p
= 8.3 ms t p
= 10 ms t p
= 10 ms f = 60 Hz
T j
= 150 °C t p
= 10 ms
T j
= 150 °C
T j
= 150 °C
25
22
20
394
360
648
100
600
V
DRM
/V
RRM
+ 100
4
1
5
-40 to +150
-40 to +150
A
A
A 2 s
A/µs
Symbol
Table 3: Electrical characteristics (T j
= 25 °C unless otherwise specified)
Test conditions Value Unit
V
V
A
W
V
°C
°C
I
GT
V
GT
V
GD
I
H
I
L dV/dt t gt t q
V
D
= 12 V, R
L
= 33 Ω
Max.
Max.
V
D
= V
DRM
, R
L
= 3.3 kΩ
I
T
= 500 mA, gate open
I
G
= 1.2 x I
GT
V
D
= 402 V, gate open
T
T j j
= 150 °C
= 150 °C
Min.
Max.
Max.
Min.
I
TM
= 80 A, V
D
= 402 V, I
G
= 30 mA, (dI
G
/dt) max = 0.2 A/µs Typ.
I
TM
= 80 A, V
D
= 402 V, (d
I
/dt)off = 30 A/µs,
V
R
= 25 V, dV
D
/dt = 50 V/µs
T j
= 150 °C Typ.
15
1.3
0.15
60
80
500
1.9
85 mA
V
V mA mA
V/µs
µs
µs
2/10 DocID029588 Rev 2
TN4015H-6G
I
Symbol
V
V
DRM
R
TM
TO
D
, I
RRM
I
TM
= 80 A, t p
= 380 µs
Threshold voltage
Dynamic resistance
V
D
= V
DRM
= V
RRM
Table 4: Static characteristics
Test conditions
T
T
T j j j
= 25 °C
= 150 °C
= 150 °C
T j
= 25 °C
T j
= 150 °C
Max.
Max.
Max.
Max.
Characteristics
Value Unit
1.6
0.85
10
10
6
V mΩ
µA mA
Symbol
R th(j-c)
R th(j-a)
Table 5: Thermal parameters
Parameter
Junction to case (DC)
Junction to ambient (DC)
S (1) = 1 cm²
Max.
Typ.
Value
0.8
45
Unit
°C/W
Notes:
(1)
S = Copper surface under tab
DocID029588 Rev 2 3/10
Characteristics
1.1 Characteristics (curves)
Figure 1: Maximum average power dissipation versus average on-state current
40
P(W)
30
α = 30°
α = 60°
α = 90°
α = 120°
α = 180°
D.C
20
Figure 2: Average and DC on-state current versus case temperature
I
T(AV)
(A)
50
α = 30 ° α = 60 °
α = 90 ° α = 120° α = 180° D.C
40
30
TN4015H-6G
20
10 360° 10
α
0
0 5 10 15 20
I
T(AV)
(A)
25 30 35
Figure 3: Average and D.C. on state current versus ambient temperature
I
T(AV)
(A)
3.0
0
0 25 50 75
T
C
(°C)
100 125 150
Figure 4: Relative variation of thermal impedance versus pulse duration
K = [Z th
/R th
]
1.0E+00
Z th(j-c)
2.5
D.C
Z th(j-a)
2.0
1.0E-01
α = 180 °
1.5
1.0
1.0E-02
0.5
0.0
0 25 50 75
T a
(°C)
100 125 150
Figure 5: Relative variation of gate trigger current and gate voltage versus junction temperature
(typical values)
I
GT
, V
GT
[T j
] / I
GT
, V
GT
[T j
= 25 °C]
2.5
2.0
1.5
1.0
0.5
0.0
-50
V
GT
I
GT
-25 0 25 50
T j
(°C)
75 100 125
1.0E-03
1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 tp (s)
150
1.8
1.5
1.3
1.0
0.8
Figure 6: Relative variation of holding and latching current versus junction temperature
(typical values)
I
H
, I
L
[T j
] / I
H
, I
L
[T j
= 25 °C]
2.5
2.3
2.0
I
H
I
L
0.5
0.3
0.0
-50 -25 0 25 50
T j
(°C)
75 100 125 150
4/10 DocID029588 Rev 2
TN4015H-6G
Figure 7: Relative variation of static dV/dt immunity versus junction temperature
(typical values)
12 d V /d t [ T j
] / d V /d t [ T j
= 150 °C ]
11
V
D
= 402 V
10
9
6
5
4
8
7
3
2
1
0
90
Above test equipment capability
95 100 105 110 115 120 125 130 135 140 145 150
Tj(°C)
Figure 9: Non repetitive surge peak on-state current for a sinusoidal pulse with width t p
< 10 ms
I
TSM
(A)
10000
T j initial = 25 °C dI/dt limitation: 100 A/µs
I
TSM
Characteristics
Figure 8: Surge peak on-state current versus number of cycles
450
I
TSM
(A)
400
350
T
Non repetitive j initial = 25 °C
One cycle
300
250
200
150
100
50
0
1
Repetitive
T c
= 119 °C
10
Number of cycles
100
1000
Figure 10: On-state characteristics
(maximum values)
I
TM
(A)
1000
1000 100
100
10
10
0.01
0.10
tp(ms)
1.00
10.00
Figure 11: Relative variation of leakage current versus junction temperature
1.0E+00
I
DRM
, I
RRM
[Tj; V
DRM
, V
RRM
] / I
DRM
, I
RRM
[150 °C; 600 V]
V
DRM
= V
RRM
= 600 V
1.0E-01
1.0E-02
1.0E-03
1.0E-04
1.0E-05
25 50 75
Tj(°C)
100 125 150
1
0.0
T j
= 150 °C
1.0
T j
= 25 °C
2.0
V
T M
(V)
3.0
T j max :
V
TO
R d
= 0.85 V
= 10 m
Ω
4.0
60
50
40
30
20
10
0
0
Figure 12: Thermal resistance junction to ambient versus copper surface under tab
R th(j-a)
(°C/W)
80
70
5 10 15
Epoxy printed board FR4, eCU= 35 µm
S
Cu
(cm²)
20 25 30 35 40
DocID029588 Rev 2 5/10
Package information
2
2.1
Package information
TN4015H-6G
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
Epoxy meets UL94, V0
Lead-free, halogen-free package
D²PAK package information
Figure 13: D²PAK package outline
6/10 DocID029588 Rev 2
TN4015H-6G
Ref.
A
A1
A2
A3
Min.
4.30
2.49
0.03
Package information
Table 6: D²PAK package mechanical data
Dimensions
Millimeters
Inches (1)
Typ. Max. Typ.
0.25
4.60
2.69
0.23
D
D1
D2 e b b2 c c2
E
E1
E2
G
0.70
1.25
0.45
1.21
8.95
7.50
1.30
2.54
10.00
8.30
6.85
4.88
10.28
8.70
7.25
5.28
H
L
L2
L3
15
1.78
1.27
1.40
15.85
2.28
1.40
1.75
R 0.40
V2 0° 8°
Notes:
(1)
Dimensions in inches are given for reference only
0.93
1.7
0.60
1.36
9.35
8.00
1.70
Min.
0.1693
0.0980
0.0012
0.3937
0.3268
0.2697
0.1921
0.5906
0.0701
0.0500
0.0551
0.0276
0.0492
0.0177
0.0476
0.3524
0.2953
0.0512
0.1
0°
0.0098
0.0157
Max.
0.1811
0.1059
0.0091
0.4047
0.3425
0.2854
0.2079
0.6240
0.0898
0.0551
0.0689
0.0366
0.0669
0.0236
0.0535
0.3681
0.3150
0.0669
8°
DocID029588 Rev 2 7/10
Package information
Figure 14: D²PAK recommended footprint (dimensions are in mm)
TN4015H-6G
8/10 DocID029588 Rev 2
TN4015H-6G
3 Ordering information
Figure 15: Ordering information scheme
Ordering information
4
TN 40 15 H - 6 G - TR
Series
TN = SCR
Current
40 = 40 A
Gate sensitivity
15 = 15 m A
High temperature
H = 150 °C
Voltage
6 = 600 V
Package
G = D ² PA K
Packing mode
Blank = tube
TR = Tape and reel
Order code
TN4015H-6G
TN4015H-6G-TR
Table 7: Ordering information
Marking Package Weight Base qty.
TN4015H6
TN4015H6
D²PAK
D²PAK
1.5 g
1.5 g
50
1000
Delivery mode
Tube
Tape and reel
Revision history
Date
Table 8: Document revision history
Revision Changes
01-Aug-2016
22-May-2017
1
2
Initial release.
Updated Figure 13: "D²PAK package outline" .
DocID029588 Rev 2 9/10
TN4015H-6G
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics
– All rights reserved
10/10 DocID029588 Rev 2
