X00619
Datasheet
0.8 A - 600 V sensitive gate SCR
G
A
K
K
TO-92 (preform)
A
G
A
TO-92 (straight)
K
G
A
K
SOT-223
A
G
Features
• On-state rms current, I
T(RMS)
0.8 A
• Repetitive peak off-state voltage 600 V
• Triggering gate current from 30 to 200 μA
• ECOPACK2 compliant
Applications
• Limited gate current topologies
• Ground fault circuit interrupters
• Overvoltage crowbar protection in power supplies
• Protection in electronic ballasts
• Capacitive discharge ignitions
• Ignitors (lighting, oven...)
Description
The X00619 SCR can be used as on/off function in applications where topology does not offer high current for gate triggering.
This device is optimized in forward voltage drop and inrush current capabilities for reduced power losses and high reliability in harsh environments.
Product status link
TO92 straight leads
(bulk packing)
X00619
TO92 leads preform
(tape and reel or ammopack packing)
SOT-223
(tape and reel packing)
Product summary
I
T(RMS)
V
DRM
/V
RRM
I
GT
T j max.
up to 0.8 A
600 V
From 30 to 200 µA
125 °C
DS6289 - Rev 4 - December 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
1
X00619
Characteristics
Characteristics
Table 1. Absolute maximum ratings (limiting values, T j
= 25 °C unless otherwise specified)
Symbol Parameters Value
I
T(RMS)
I
T(AV)
I
TSM
I 2 t dl/dt
I
GM
P
G(AV)
T stg
T j
On-state RMS current (180° conduction angle)
Average on-state current (180° conduction angle)
Non repetitive surge peak on-state current,
T j
initial = 25 °C
I 2 t value for fusing
Critical rate of rise of on-state current
I
G
= 2 x I
GT
, t r
≤ 100 ns
Peak gate current
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
TO-92
SOT-223
TO-92
SOT-223 t p
= 8.3 ms t p
= 10 ms t p
= 10 ms
F = 60 Hz t p
= 20 µs
T
L
= 83 °C
T amb
= 107 °C
T
L
= 83 °C
T amb
= 107 °C
T j
= 25 °C
T j
= 25 °C
T j
= 125 °C
T j
= 125 °C
T j
= 125 °C
0.8
0.5
10
9
0.4
50
1
0.1
-40 to +150
-40 to +125
Unit
A
A
A
A 2 s
A/µs
A
W
°C
°C
Symbol
I
GT
V
GT
V
GD
V
RG
I
H
I
L dV/dt
Table 2. Electrical characteristics (T j
= 25 °C, unless otherwise specified)
Parameters
V
D
= 12 V, R
L
= 140 Ω
V
D
= V
DRM
, R
L
= 3.3 kΩ, R
GK
= 1 kΩ, T j
= 125 °C
I
RG
= 10 µA
I
T
= 50 mA, RGK = 1 kΩ
I
G
= 1 mA, R
GK
= 1 kΩ
V
D
= 67 % V
DRM
, R
GK
= 1 kΩ, T j
= 125 °C
Value Unit
Min.
30
Max.
200
Max.
0.8
µA
V
V Min.
0.2
Min.
Max.
5
5
Max.
Min.
6
40 mA mA
V/µs
Symbol
V
TM
V
TO
R d
I
DRM
I
RRM
Table 3. Static electrical characteristics
Test conditions
I
TM
= 1 A, t p
= 380 µs
Threshold on-state voltage
Dynamic resistance
V
DRM
= V
RRM
, R
GK
= 1 kΩ
V
DRM
= V
RRM
, R
GK
= 1 kΩ
25 °C Max.
Value Unit
1.35
125 °C Max.
0.85
V
V mΩ 125 °C Max.
245
25 °C
125 °C
Max.
1
100
µA
DS6289 - Rev 4 page 2/13
Symbol
R
R
R th(j-l) th(j-c) th(j-a)
Junction to leads (DC)
Junction to case (DC)
Junction to ambient (DC)
Junction to ambient (DC)
1. S = Copper surface under tab.
Table 4. Thermal resistance
Parameters
S (1) = 5 cm
2
TO-92
SOT-223
TO-92
SOT-223
X00619
Characteristics
Max.
value
70
30
150
60
Unit
°C/W
DS6289 - Rev 4 page 3/13
X00619
Characteristics (curves)
1.1
Characteristics (curves)
Figure 1. Maximum average power dissipation versus average on-state current
0.6
P(W)
α = 30°, 60°, 90°, 120°, 180°, DC
0.4
0.2
0.0
0.0
0.1
0.2
I
T(AV)
(A)
0.3
0.4
α
0.5
360°
0.6
Figure 2. Average and DC on-state current versus case temperature (SOT-223)
1.0
I
T(AV)
(A)
SOT-223
0.8
α = 30°, 60°, 90°, 120°, 180°, DC
0.6
0.4
0.2
0.0
0 25 50
T c
(°C)
75 100 125
0.6
0.4
0.2
0.0
0
Figure 3. Average and DC on-state current versus lead temperature (TO-92)
1.0
I
T(AV)
(A)
TO-92
0.8
α = 30°, 60°, 90°, 120°, 180°, DC
Figure 4. Average and DC on-state current versus ambient temperature (free air convection)
1.0
I
T(AV)
(A)
DC
SOT-223
S
CU
= 5 cm²
0.8
25 50
T l
(°C)
75 100 125
0.6
0.4
0.2
0.0
0 25
α = 180°
T amb
(°C)
50
TO-92
75 100 125
Figure 5. Relative variation of thermal impedance junction to ambient versus pulse duration
1.00
Z th(j-a)
/R th(j-a)
0.10
0.01
1.0E-02
TO-92
S
CU
= 0.5 cm²
1.0E-01
SOT-223
1.0E+00 t p
(s)
1.0E+01 1.0E+02 1.0E+03
Figure 6. Relative variation of gate trigger, holding and latching current versus junction temperature
1.6
I
G
,I ,I [T j
] / I
G
,I ,I [T j
=25°C]
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-40 -20 0 20
T j
(°C)
40 60
Typical values
80
I
GT
I
H and I
L
100 120
DS6289 - Rev 4 page 4/13
X00619
Characteristics (curves)
Figure 7. Relative variation of holding current versus gate-cathode resistance (typical values)
3.5
I [R
G K
] / I [ R
GK
=1kΩ]
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1.E-02 1.
E-01
R
GK
(kΩ)
1.E+00 1.E+01 1.E+02
Figure 8. Relative variation of static dV/dt immunity versus gate-cathode resistance (typical values)
100.0
dV/dt[R
GK
] / dV/dt[R
GK
=1kΩ]
V
D
= 0.67xV
DRM
10.0
1.0
0.1
1.0E-01
R
GK
(kΩ)
1.0E+00 1.0E+01
Figure 9. Relative variation of static dV/dt immunity versus gate-cathode capacitance (typical values)
100 dV/dt[C
GK
] / dV/dt[R
GK
=1kΩ]
V
D
= 0.67xV
DRM
R
GK
= 1 kΩ
10
1
1
C
GK
(nF)
10
Figure 10. Surge peak on-state current versus number of cycles
10
I
TSM
(A)
6
5
4
3
9
8
7
2
1
0
1
Non repetitive
T j initial=25 °C
Repetitive
T
C
= 83°C
Number of cycles
10 100 tp=10ms
One cycle
1000
Figure 11. Non-repetitive surge peak on-state current for sinusoidal pulse (t p
< 10 ms)
100
I
TSM
(A)
T j initial=25 °C
I
TSM
10
Figure 12. On-state characteristics (maximum values)
10.0
I
TM
(A)
1.0
T
J
=125 C
1
T
J
=25 C
0
0.01
0.10
1.00
10.00
0.1
0.5
1.0
1.5
V
TM
(V)
2.0
2.5
V to
T j
R d max
=0.85 V
=245 mΩ
3.0
DS6289 - Rev 4 page 5/13
X00619
Characteristics (curves)
Figure 13. Thermal resistance junction to ambient versus copper surface under tab
R th(j-a)
(°C/W)
80
70
60
50
40
130
120
110
100
90
30
20
10
0
0.0
0.5
1.0
1.5
Epoxy printed circuit board
FR4, copper thickness = 35 µm
2.0
S(cm²)
2.5
3.0
3.5
4.0
4.5
5.0
DS6289 - Rev 4 page 6/13
2
2.1
X00619
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com
. ECOPACK is an ST trademark.
•
•
TO-92 package information
Lead free plating + halogen-free molding resin
Epoxy meets UL94, V0
Figure 14. TO-92 with straight leads (plastic) package outline c
A
B C a b
F D E
Table 5. TO-92 with straight leads (plastic) package mechanical data
Dimensions
Ref.
Min.
Millimeters
Typ.
1.35
E
F a b c
C
D
A
B
4.40
12.70
2.54
1.27
1. Inches dimensions given for information
Max.
4.70
3.70
0.50
0.48
Min.
0.172
0.554
Inches
(1)
Typ.
0.048
0.100
0.050
Max.
0.190
0.152
0.022
0.019
DS6289 - Rev 4 page 7/13
2.2
X00619
TO-92 with leads preform (plastic) package information
•
•
TO-92 with leads preform (plastic) package information
Lead free plating + halogen-free molding resin
Epoxy meets UL94, V0
Figure 15. TO-92 with leads preform (plastic) package outline
DS6289 - Rev 4
Table 6. TO-92 with leads preform (plastic) package mechanical data
Dimensions
Ref.
Min.
1.30
7.69
2.40
30°
Millimeters
Typ.
1.70
G
H d
θ 40°
1. Inches dimensions given for information
Max.
2.00
9.69
2.90
50°
Min.
0.051
0.303
0.094
30°
Inches
(1)
Typ.
0.067
40°
Max.
0.079
0.381
0.114
50° page 8/13
2.3
•
•
SOT-223 package information
Epoxy meets UL94, V0
Lead free plating + halogen-free molding resin
Figure 16. SOT-223 package outline
V
A
A1
B e1
D
B1
H E
1
4
2 3 e
X00619
SOT-223 package information c
DS6289 - Rev 4 page 9/13
DS6289 - Rev 4
X00619
SOT-223 package information
Ref.
Min.
e e1
E c
D
H
V
A
A1
B
B1
0.60
2.90
0.24
6.30
3.30
6.70
1. Inches only for reference
0.02
0.70
3.00
0.26
6.50
2.3
4.6
3.50
7.00
Table 7. SOT-223 package mechanical data
Dimensions
Millimeters
Typ.
Min.
Max.
1.80
0.10
0.85
3.15
0.35
6.70
0.024
0.114
0.009
0.248
3.70
7.30
0.130
0.264
10° max.
Inches
(1)
Typ.
0.0008
0.0276
0.1181
0.0102
0.2559
0.0906
0.1811
0.1378
0.2756
Figure 17. SOT-223 footprint (dimensions in mm)
3.25
1.32
Max.
0.0709
0.0039
0.0335
0.1240
0.0138
0.2638
0.1457
0.2874
5.16
7.80
2.30
0.95
1.32
page 10/13
3
Ordering information
Figure 18. Ordering information scheme
X 006 19 M A 1AA2
Sensitive SCR series
Current
006 = 0.8 A
Sensitivity
19 = 30 µA to 200 µA
Voltag e
M = 600 V
Package
A = TO-92
N = SOT-223
Packing mode
1AA2 = Bulk (TO-92 with straight leads)
2AL2 = Ammopack (TO-92 with leads preform)
5AL2 = Tape and reel (TO-92 with leads preform and SOT-223)
X00619
Ordering information
Order code
X00619MA1AA2
X00619MA2AL2
X00619MA5AL2
X00619MN5AL2
Marking
X0619 MA
X0 619 MN
Table 8. Ordering information
Package
TO-92 straight leads
TO-92 leads preform
SOT-223
Weight
0.2 g
0.2 g
0.2 g
0.12 g
Base qty.
2500
2000
2000
1000
Delivery mode
Bulk
Ammopack
Tape and reel
DS6289 - Rev 4 page 11/13
Revision history
Date
26-May-2009
03-May-2012
03-Sep-2021
20-Dec-2021
Table 9. Document revision history
Revision
1
2
3
4
Changes
First issue.
Added SOT-223 package.
Inserted TO-92 with leads preform package.
Updated Figure 10
and
Figure 11 .
X00619
DS6289 - Rev 4 page 12/13
X00619
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DS6289 - Rev 4 page 13/13
