MJD3055T4
Datasheet
Low voltage NPN power transistor
B
1
TAB
DPAK
1
2 3
C 2, TAB
Features
• Surface-mounting DPAK (TO-252) power package in tape and reel
• Electrically similar to MJE3055T
Application
• General purpose switching and amplifier
Description
The device is manufactured in planar technology with “base island” layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage.
E 3
Product status link
MJD3055T4
Product summary
Order code MJD3055T4
Marking
Package
Packing
MJD3055
DPAK
Tape and reel
DS13694 - Rev 1 - March 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
MJD3055T4
Electrical ratings
1
Electrical ratings
Symbol
V
CBO
V
CEO
V
EBO
I
C
I
B
P
TOT
T stg
T
J
Table 1. Absolute maximum ratings
Collector-base voltage (I
E
= 0 V)
Collector-emitter voltage (I
B
= 0 A)
Collector-base voltage (I
C
= 0 A)
Collector current
Parameter
Base current
Total power dissipation at T c
= 25°C
Storage temperature range
Maximum operating junction temperature
Table 2. Thermal data
Symbol
R thJC
R thJA
Parameter
Thermal resistance, junction-to-case
Thermal resistance, junction-to-ambient
Value
70
60
5
10
6
20
-65 to 150
150
A
A
W
Unit
V
V
V
°C
Value
6.25
100
Unit
°C/W
°C/W
DS13694 - Rev 1 page 2/10
2
MJD3055T4
Electrical characteristics
Electrical characteristics
T case
= 25°C unless otherwise specified.
Table 3. Electrical characteristics
V
V
Symbol h
I
I
I
I
CEX
CBO
CEO
EBO
CEO(sus)
CE(sat)
V
BE(on)
FE
(2)
(2)
(2)
(2)
Parameter Test conditions
Collector cut-off current
V
CE
= 70 V, V
BE
= -1.5 V
V
CE
= 70 V, T
J
= 150°C, V
BE
= -1.5 V (1)
V
CB
= 70 V, I
E
= 0 A
Collector cut-off current
V
CB
= 70 V, T
J
= 150°C, I
E
= 0 A
(1)
Collector cut-off current
V
CE
= 30 V, I
B
= 0 A
Emitter cut-off current
Collector-emitter sustaining voltage
V
EB
= 5 V
I
C
= 0 A
I
C
= 30 mA
I
B
= 0 A
Collector-emitter saturation voltage
I
C
= 4 A, I
B
= 0.4 A
I
C
= 10 A, I
B
= 3.3 A
Base-emitter voltage I
C
= 4 A, V
CE
= 4 V
DC current gain
I
C
= 4 A V
CE
= 4 V
I
C
= 10 A V
CE
= 4 V
Transition frequency I
C
= 0.5 A, V
CE
= 10 V, f = 500 kHz f
T
1. Defined by design, not subject to production test.
2. Pulsed: Pulse duration = 300 μs, duty cycle 1.5%.
Min.
60
20
5
2
Typ.
Max.
20
2
20
2
50
0.5
1.1
8
1.8
100
V
V
V
Unit
μA mA
μA mA
µA mA
MHz
DS13694 - Rev 1 page 3/10
3
3.1
MJD3055T4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com
. ECOPACK is an ST trademark.
DPAK (TO-252) type C2 package information
Figure 1. DPAK (TO-252) type C2 package outline
DS13694 - Rev 1
0068772_type-C2_rev30 page 4/10
DS13694 - Rev 1
Dim.
L6
θ1
θ2
V2
L2
L3
L4
E1 e
H
L
L1 c c2
D
D1
E
A
A1
A2 b b4
MJD3055T4
DPAK (TO-252) type C2 package information
Table 4. DPAK (TO-252) type C2 mechanical data
Min.
0.47
0.47
6.00
5.10
6.50
2.20
0.90
0.00
0.72
5.13
5.20
2.186
9.80
1.40
mm
Typ.
2.30
1.01
5.33
6.10
6.60
2.286
10.10
1.50
2.90 REF
0.90
0.60
5°
5°
0°
0.51 BSC
0.80
1.80 BSC
7°
7°
Max.
0.60
0.60
6.20
5.60
6.70
2.38
1.10
0.10
0.85
5.46
5.50
2.386
10.40
1.70
1.25
1.00
9°
9°
8° page 5/10
DS13694 - Rev 1
MJD3055T4
DPAK (TO-252) type C2 package information
Figure 2. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_30 page 6/10
3.2
DPAK (TO-252) packing information
Figure 3. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
MJD3055T4
DPAK (TO-252) packing information
F
E
W
User direction of feed
R
Bending radius
AM08852v1
DS13694 - Rev 1 page 7/10
DS13694 - Rev 1
A
D
B
Figure 4. DPAK (TO-252) reel outline
MJD3055T4
DPAK (TO-252) packing information
T
40mm min. access hole at slot location
C
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
Dim.
P2
R
T
W
K0
P0
P1
E
F
A0
B0
B1
D
D1
AM06038v1
1.5
1.5
1.65
7.4
2.55
3.9
7.9
1.9
40
0.25
15.7
Table 5. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
C
D
G
A
B
N
T
Min.
1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
1.5
12.8
20.2
16.4
50 mm
Max.
330
13.2
18.4
22.4
2500
2500 page 8/10
Revision history
Date
29-Mar-2021
Version
1
Table 6. Document revision history
Changes
Initial release.
MJD3055T4
DS13694 - Rev 1 page 9/10
MJD3055T4
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DS13694 - Rev 1 page 10/10
