STD1802T4-A
Low voltage fast-switching NPN power transistor
Features
■
■
■
■
■
This device is qualified for automotive application
Very low collector to emitter saturation voltage
High current gain characteristic
Fast-switching speed
Surface-mounting DPAK (TO-252) power package in tape & reel (suffix “T4)
Description
The device is manufactured in Planar technology with “Base Island” layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage.
Applications
■
■
■
■
CCFL drivers
Voltage regulators
Relay drivers
High efficiency, low voltage, switching applications
1
TO-252
DPAK
(suffix “T4”)
3
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Order code Marking
STD1802T4-A D1802
Package
DPAK
Packaging
Tape & reel
June 2007 Rev 1 1/10 www.st.com
10
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
V
CBO
V
CEO
V
EBO
I
C
I
CM
I
B
P tot
T stg
T
J
Absolute maximum rating
Parameter
Collector-base voltage (I
E
=0)
Collector-emitter voltage (I
B
=0)
Emitter-base voltage (I
C
=0)
Collector current
Collector peak current (t
P
< 5ms)
Base current
Total dissipation at T c
≤ 25°C
Storage temperature
Max. operating junction temperature
Table 3.
Thermal data
Symbol Parameter
R thj-case
Thermal resistance junction-case __ max
STD1802T4-A
Value
6
3
80
60
6
1
15
-65 to 150
150
Unit
W
°C
A
A
°C
V
A
V
V
Value
8.33
Unit
°C/W
2/10
STD1802T4-A Electrical characteristics
(T case
= 25°C unless otherwise specified)
Table 4.
Electrical characteristics
Symbol Parameter Test Conditions
I
CBO
I
EBO
V
(BR)CBO
V
(BR)CEO
V
(BR)EBO
V
CE(sat)
(1)
V
BE(sat)
(1) h
FE
(1) f
T
C
CBO t
ON t s t f
Collector cut-off current
(I
E
=0)
Emitter cut-off current
(I
C
=0)
Collector-base breakdown voltage
(I
E
= 0)
Collector-emitter breakdown voltage
(I
B
= 0)
Emitter-base breakdown voltage (I
C
= 0)
V
CB
= 40V
V
EB
= 4V
I
C
=100 µ A
I
C
=1mA
I
E
=100 µ A
Collector-emitter saturation voltage
I
C
=2A _ _ I
B
=100mA
I
C
=3A __ _ I
B
=150mA
Base-emitter saturation voltage
I
C
=2A _ _ I
B
=100mA
DC current gain
Transition frequency
I
C
=100mA V
CE
=2V
I
C
=3A V
CE
=2V
V
CE
=10V I
C
=50mA
Collector-base capacitance
V
CB
=10V f = 1MHz
Resistive load
Turn-on time
Storage time
Fall time
I
C
=1A V
I
B1
=-I
B2
=0.1A
CC
=30V
Note (1) Pulsed duration = 300 µ s, duty cycle ≤ 1.5%
Min.
Typ.
Max.
Unit
0.1
µ A
0.1
µ A
80
60
6
200
100
150
200
0.9
300
400
1.2
400
150
50
MHz pF
V mV mV
V
50
1.35
120
V
V ns
µ s ns
3/10
Electrical characteristics
2.1 Electrical characteristics (curves)
Figure 2.
Derating curve Figure 3.
DC current gain
STD1802T4-A
Figure 4.
Collector-emitter saturation voltage
Figure 5.
Collector-emitter saturation voltage
Figure 6.
Base-emitter saturation voltage
Figure 7.
Base-emitter on voltage
4/10
STD1802T4-A Electrical characteristics
Figure 8.
Switching times resistive load
Figure 9.
Switching times resistive load
Figure 10. Switching times resistive load
Figure 11. Switching times inductive load
Figure 12. Switching times resistive load
5/10
Electrical characteristics
2.2 Test circuits
Figure 13. Resistive load switching test circuit
STD1802T4-A
1) Fast electronic switch
2) Non-inductive resistor
6/10
STD1802T4-A Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
7/10
Package mechanical data STD1802T4-A
DIM.
G
H
L2
C
C2
D
E
L4
V2
A
A1
A2
B
B2
0.45
0.48
6.00
6.40
4.40
9.35
MIN.
2.20
0.90
0.03
0.64
5.20
0.60
0 o
TO-252 (DPAK) MECHANICAL DATA
mm
TYP.
0.60
0.60
6.20
6.60
4.60
10.10
MAX.
2.40
1.10
0.23
0.90
5.40
0.018
0.019
0.236
0.252
0.173
0.368
MIN.
0.087
0.035
0.001
0.025
0.204
0.8
1.00
8 o
0.024
0 o inch
TYP.
0.031
0.024
0.024
0.244
0.260
0.181
0.398
MAX.
0.094
0.043
0.009
0.035
0.213
0.039
0 o
P032P_B
8/10
STD1802T4-A
Table 5.
Date
28-Jun-2007
Revision history
Revision
1 Initial release.
Changes
Revision history
9/10
STD1802T4-A
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE
GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
10/10
