advertisement
▼
Scroll to page 2
Woodpeckers CIAMP RACKIT OWNER MANUAL The Clamp Васк-К is a space saving method for storing your parallel clamps. INSTALLATION: 1. Find a solid mounting area such as a stud or wood wall. It is not recommended to install directly into drywall or lower strength wall types. 2. Using one side of the Clamp Rack-lt, mark the top-hole location. FIGUREA 3. Drill a pilot hole for the 1/4" lag bolt. 4, Thread the 1/4" lag bolt into the pilot hole, FACRES leaving a minimum of 1/4" clearance between the head of the screw and the wall. FIGURE в 5. Hold the Clamp Rack-It section in place and mark the location of the lower hole. (Suggest using a level to insure it is plumb). FIGURE C 6. Remove the Clamp Rack-It and drill the second pilot hole and install the second lag screw to the same depth as the first. FIGURE D FIGURE D I Woodpeckers® 800-752-0725 - woodpeck.com ll Woodpeckers CIAMP RACKIT OWNER MANUAL The Clamp Rack-It™ is a space saving method for storing your parallel clamps. INSTALLATION: 1. Finda solid mounting area such as a stud or wood wall. It is not recommended to install directly into drywall or lower strength wall types. 2. Using one side of the Clamp Rack-It, mark the top-hole location. FIGUREA 3. Drill a pilot hole for the 1/4" lag bolt. 4. Thread the 1/4" lag bolt into the pilot hole, FAURES leaving a minimum of 1/4" clearance between the head of the screw and the wall. Figure в 5. Hold the Clamp Rack-It section in place and mark the location of the lower hole. (Suggest using a level to insure it is plumb). FIGURE C 6. Remove the Clamp Rack-It and drill the second pilot hole and install the second lag screw to the same depth as the first. FIGURE D FIGURE D I Woodpeckers® 800-752-0725 - woodpeck.com ll FIGURE E FIGURE E 7. Place both sides of the Clamp Rack-lt, 7. Place both sides of the Clamp Rack-It, (right hand side first as shown) over the lag (right hand side first as shown) over the lag 00$. FIGURE E bolts. FIGURE E 8. Tighten both lag bolts. FiGurEF FIGURE F 8. Tighten both lag bolts. Fieure F FIGURE F 9. Now you're ready to N NN 9. Now you're ready to N N RACK your CLAMPS! | | RACK your CLAMPS! | | If you think you're missing anything, email us at [email protected]. If you think you're missing anything, email us at [email protected]. You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday - Friday. Woodpeckers” You can also call us at 800-752-0725 from 9:00 a.m. to 5:00 p.m. EST Monday - Friday. Woodpeckers” PRECISION WOODWORKING TOOLS MADE IN USA PRECISION WOODWORKING TOOLS MADE IN USA Woodpeckers, LLC Strongsville, Ohio - woodpeck.com Woodpeckers, LLC Strongsville, Ohio - Woodpeck.com © 2018 Woodpeckers, LLC © 2018 Woodpeckers, LLC à WARNING! This product can expose you to chemicals, including chromium, which is known to the State of Califomia to à WARNING! This product can expose you to chemicals, including chromium, which is known to the State of Califomia to co cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov co cause cancer and birth defects or other reproductive ham. For more information go to www.P65Wamings.ca.gov
advertisement