WOODPECKER DWP611 StabilMax Trim Router Base Owner’s Manual

O W N E R ’ S
DIAGRAM
NUMBER
B
C
D
M A N U A L
(QTY) PART NAME
(1) Base
(1) Handle
(1) Centering Pin
(1) Handle Screw, 1/4-20 x 5/8”
(4) Pan Head Screws, M4 x .7mm
Scan the QR code above
to watch the video
or visit woodpeck.com
under the video tab towards
the bottom of the product page.
If you think you’re missing anything, email us at [email protected].
You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday - Friday.
1. Secure the Handle C to the top of the
Base B with the Handle Screw.
FIGURE A.
2. Align your router with the
corresponding holes in the StabilMax
Base. FIGURE B.
3. Secure your router to the Base using
the (4) Pan Head Screws.
If Using a Template Guide Bushing
1. Loosen but do not remove the Pan
Head screws that secure the StabilMax
Base to your router.
2. Place the template guide bushing in
base plate and tighten securely.
3. Insert Centering Pin D into router
collet and tighten.
4. Adjust depth of cut until cone of
Centering Pin contacts the inside of
the template guide bushing.
5. Adjust position of base until cone is
contacting template guide bushing
uniformly around its circumference.
6. Tighten the (4) Pan Head Screws.
7. Remove Centering Pin.
NOTE: Centering Pin requires template
guide bushing between 1/4" and 9/16". If
your project requires a larger template guide
bushing, use one in this range to center, then
change before proceeding.
2 Woodpeckers®
FIGURE A.
Base
Top - with
lasered logo.
Handle
Screw
Base
Bottom - counter-bored
holes, no logo.
• Align router so switch faces away from Handle (except Milwaukee).
• Actual size to aid in alignment FIGURE B.
FIGURE B.
B
A
F
C
F
E
D
A
G
G
B
C
D
D
C
B
G
E
A
F
A
B
C
D
D
E
F
G
B
G
DEWALT
DWP611, DCW600B
MAKITA
RT0701C, XTR01Z
PORTER CABLE
PCE6430
RIDGID
R2401, R860443B
RYOBI
P601
BOSCH
GKF125CEN
BOSCH COLT
PR20EVS
MILWAUKEE
2723-20
D
E
F
A
C
Base
Bottom - counter-bored
holes, no logo.
800-752-0725 ∙ woodpeck.com 3
WARNING! To reduce the risk of
injury keep hands away from moving
parts. Refer to your power tool manual
for proper setup and use.
WARNING! To reduce the risk of
injury, wear safety goggles or glasses
with side shields, ear protection
& a dust mask.
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers, LLC
At Woodpeckers we are constantly reviewing & improving our tools.
The most current version of our instruction manuals are always
available to download at woodpeck.com.
woodpeck.com (Located in the bottom section of the tool’s page under the “Additional Information” or
“Instructions” tabs.)
Be the first to know all the new products, OneTIME Tools & sales by
subscribing to our eClub. (Located at the top center of our webpage woodpeck.com.)
Subscribe to our YouTube channel to stay up-to-date on all the latest tool
tips & tricks.
REV062223
INTERACT WITH US! Follow us on Facebook, Instagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking
Resource Center/Blog. (Located at the bottom center of our webpage woodpeck.com.)
WARNING! This product can expose you to chemicals, including bisphenol, which is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov