Z CAM IPMAN S Wireless Video Streaming Device User Guide

Z CAM Monitor (App Store)

Z Camera (Google Play)

Z CAM IPMAN S Wireless Video Streaming Device - Quick User Guide

What is in the box?

● Z CAM IPMAN S main unit x 1.

● Wi-Fi antenna x 2.

How to power up Z CAM IPMAN S?

● Mount NP-F battery on to the rear socket of the main unit.

● Press and hold the release button next to the socket to unmount the battery.

● For external power supply, connect the DC plug to the power socket (6.2~18V) on the side.

How to switch on Z CAM IPMAN S?

● Ensure that power is connected.

● Push power switch upward to ON position to switch on.

● Push power switch downward to OFF position to switch off.

How to feed video signal to the HDMI input of Z CAM IPMAN S?

● Connect HDMI output of camera or other equipment to HDMI IN of the main unit.

How to get video signal from the HDMI output of Z CAM IPMAN S?

● Connect HDMI input of monitor or other equipment to HDMI OUT of the main unit.

How to install WiFi antenna?

● Align the bottom of the antenna and the antenna port on top of the main unit.

● Screw in the antenna clockwise until it is fixed in position.

● Both antennas need to be installed.

How to switch the operating mode of Z CAM IPMAN S?

● Mode selector on the side of the main unit set to Rx, status display will change to RX.

● Mode selector on the side of the main unit set to M, status display will change to TX-P.

● Mode selector on the side of the main unit set to Tx, status display will change to TX.

How to use wireless video monitoring feature?

● Camera HDMI output signal must be 1080p60 or below (1080i is not supported).

● Connect camera HDMI output to HDMI IN of main unit, set to TX mode.

● Set another main unit to RX mode, connect HDMI OUT to monitor input.

● Press and hold the function button in the middle for two second until pairing icon shows up.

● Release the function button and wait for auto pairing.

● Channel number on both units should be the same once pairing is successful.

● Once there is a camera HDMI signal output it will be streamed to the RX connected monitor.

● Repeat above procedure to add RX main unit up to a maximum of four.

How to use mobile devices for video monitoring?

● Download and install “Z CAM Monitor” app on iOS devices. (use Z Camera app on Android devices)

● Camera HDMI output signal must be 1080p60 or below (1080i not supported).

● Connect camera HDMI output to HDMI IN of main unit, set to TX mode.

● Note the SSID on the top left corner of main unit display.

● Open “Z CAM Monitor” app, click the bottom right wireless hotspot icon , enter SSID and tap the arrow sign to connect.

● Once there is a camera HDMI signal output it will be streamed to the “Z CAM Monitor” app.

● Repeat above procedure to add mobile devices up to a maximum of four.

How to connect to a wireless router?

（ * This feature is not yet supported on Android.

）

● Select M mode on the main unit.

● Connect iOS device to main unit using USB-C to Lightning cable.

● Turn on the main unit and iOS device, open the Z CAM Monitor app.

● Tap the bottom right wireless network icon . Available wireless networks will be shown.

● Select the wireless network, enter password and and tap the arrow sign to connect.

● Connected WiFi SSID and IP address will be shown on the main unit display.

Please visit www.z-cam.com for latest product information and user guide.

Disclaimer: All product features and technical specifications stated are subjected to the sole interpretation and explanation of Shenzhen ImagineVision Technology Limited.