PLANET IPOE-165 Datasheet
Add to My manuals6 Pages
Planet IPOE-165 is an Industrial IP67-rated PoE injector that delivers 30 watts of power over Ethernet, allowing you to connect and power high-power devices like PTZ cameras and wireless access points. With its weather-proof RJ45 connector and shielded plug, it's ideal for outdoor installations. The IPOE-165 also features a wide range of compatibility, supporting both IEEE 802.3at and 802.3af PoE devices.
advertisement
![PLANET IPOE-165 Datasheet | Manualzz PLANET IPOE-165 Datasheet | Manualzz](http://s1.manualzz.com/store/data/066856582_1-931e3425c6445f17f9e8dff7706a0e5d-360x466.png)
IPOE-165
Industrial IP67 1-Port 802.3at PoE+ Injector
Ideal for Powered Devices that Consume High Power
Planet IPOE-165 Industrial IP67-rated Single-port 802.3at PoE Plus Injector provides a maximum of up to 30 watts for PoE output port, transmitting both the
Gigabit Ethernet data and 802.3at PoE power over the UTP cable. It is specifically designed for such outdoor powered devices (PDs) as PTZ network cameras, PTZ speed dome cameras, multi-channel (11a/b/g/n) wireless LAN access points and other network devices that need a higher power to work stably.
Making Network Easier and More Reliable
The IPOE-165 can deliver 30-watt 54V DC power over Cat.5/5e/6 Ethernet cables which allow data and power to transmit simultaneously through the cable between the Injector (IPOE-165) and PoE PD or PoE Splitter (IPOE-162S/POE-162S). The maximum distance between the Injector and Splitter is 100 meters. As the IPOE-
165 is also backward compatible with IEEE 802.3af PoE PD or PoE Splitter, the system administrator only has to use one single RJ45 Ethernet cable to carry both power and data to another device. It would make the network deployment easier and more reliable.
Data
Gigabit Switch
Monitoring Center
DC Power
Power
DC
IPOE-165
IPOE Splitter DC
Power
PoE
Data
100 meters
PoE
DC
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)
Physical Port
• Two 10/100/1000BASE-T Gigabit RJ45 ports
– 1-port Data + Power output
– 1-port Data input
• One 2-pin terminal block for power input. (Power Range:
24 ~ 56V DC)
Power over Ethernet
• 1-port data + power output
– Complies with IEEE 802.3at Power over Ethernet plus
PSE
– Compatible with IEEE 802.3at/802.3af powered devices
– Provides DC 44-56V power over RJ45 Ethernet cable to device with Ethernet port
– Supports total PoE budget up to 30 watts for PoE output port
– Auto detects powered device (PD)
– Remote power feeding up to 100m
Industrial Case and Installation
• IP67-rated and IK10-rated aluminum case
• LED indicators for power LED and PoE-in-use
• Wall-mount design
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Plug and Play installation
1
IPOE-165
Weather-proof RJ45 Ethernet Connector and Shielded Plug
The IPOE-165 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and many more. The IPOE-165 is equipped with 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection. Moreover, it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
Environmentally-hardened Design
With industrial-level IP67-rated aluminum case, the IPOE-165 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment.
Dust-proof
Water-proof
Surge-proof
Frost-proof Vandal-proof
Environmental Adaptations in Outdoor Area
Convenient and Reliable Power System
To facilitate the 802.3at PoE+ usage with commonly used 24~56V DC power input for transportation and industrial-level applications, the IPOE-165 adopts
24~56V DC to 54V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.
Power Input
24~56V DC
802.3af/802.3at
PoE Compliant PD Device
54V DC PoE
10/100/1000BASE-T
10/100/1000BASE-T
24~56V DC to 54V DC PoE Power Boost
10/100/1000Mbps Ethernet Data Rate
2
IPOE-165
Applications
Connecting to IEEE 802.3at Compliant Powered Devices
Having the capability of IEEE 802.3at Power over Ethernet standard, the IPOE-165 can directly connect and inject power via RJ45 Ethernet cable to any
IEEE 802.3at end-nodes like PTZ network cameras, PTZ speed dome cameras, multi-channel wireless LAN access points and other network devices.
IPOE-165 Installation
100 meters
Data
Industrial Switch
Power
PoE
Data
Power
DC
DC 24~56V
Power Supply
IPOE-165
PoE
IP PTZ Camera
PoE
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line
IEEE 802.3at Injector and Splitter Installation
For a place which is hard to find the power inlet, the IPOE-165 and IPOE-162S can operate as a pair to provide the easiest way to power your
Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome camera and multi-channel wireless LAN access points installed on the top of the building or in enterprise office or home.
IPOE-165 + IPOE-162S Installation
100 meters
Data
Industrial Switch
Power
DC
DC 24~56V
Power Supply
IPOE-165
Power
PoE
Data
Industrial 802.3at
PoE Splitter
Digital Signage
Data
DC
Power
12V/24V DC Output
PoE
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line
3
IPOE-165
Diagram
• IPOE-165 without waterproof cable glands
PoEin-Use
PWR
IPOE-165
• IPOE-165 with waterproof cable glands
PoEin-Use
PWR
IPOE-165
Unit: mm
Unit: mm
4
Product Specifications
Product
Hardware Specifications
Input Port
Output Port
IPOE-165
Interface
Data Rate
LED Indicator
Input Voltage
ESD Protection
Surge Protection
Enclosure
Installation
Dimensions (W x D x H)
Weight
MTBF
Network Cable
Input Power Terminal Block
PowConsumption
1 x 10/100/1000BASE-T “Data” in RJ45 port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE+
“Data + DC” out RJ45 port
1 x 2-pin terminal block
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
10/100/1000Mbps
PWR ( Green )
PoE-in-use x 1 ( Green )
24~56V DC
Voltage
DC 24V
DC 36V
DC 54V
Air 8KV DC
Contact 6KV DC
6KV
IP67-rated and IK10 aluminum metal case
System on
0.72W
0.72W
1.08W
Wall-mount ear
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable gland
339g
373g (with three waterproof cable glands)
>100,000 hours
10BASE-T: UTP category 3, 5 cable (≤100m)
100BASE-TX: UTP category 5,5e cable (≤100m)
1000BASE-T: UTP category 5e,6 cable(≤100m)
Power over Ethernet
PoE Standard
PoE Power Output
PoE Power Supply Type
Power Pin Assignment
Standards Conformance
Regulatory Compliance
IEEE 802.3at Power over Ethernet Plus / End-span PSE
Backward compatible with IEEE 802.3af Power over Ethernet
54V DC, max. 30 watts
End-span
1/2 (+), 3/6 (-)
Stability Testing
Standards Conformances
FCC Part 15 Class A
CE
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature
Storage Temperature
Humidity
-40 ~ 75 degrees C
-40 ~ 85 degrees C
5 ~ 95% (non-condensing)
Ordering Information
IPOE-165 Industrial IP67 1-Port 802.3at PoE+ Injector (-40~75 degrees C)
Full Load (Max.)
43.4W
41.04W
40.5W
IPOE-165
5
IPOE-165
Related Products
IPOE-162
IPOE-260 Series
IPOE-162S
IPOE-171-95W
IPOE-171-60W
IPOE-270 /IPOE-270-12V
PWR-75-48
PWR-60-24
PWR-75-24
Industrial IEEE 802.3at Gigabit Power over Ethernet Plus Injector (Mid-span, 30 watts)
Industrial 2-port 10/100/1000T 802.3at PoE+ Injector Hub
Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 Watts, -40~75 degrees C, 12~48V DC)
Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (60 Watts, -40~75 degrees C)
Industrial 2-port Multi-Gigabit 802.3bt PoE++ Injector Hub
48V, 75W Din-rail Power Supply (NDR-75-48, adjustable 48-56V DC Output)
60W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C)
75W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: [email protected]
Fax: 886-2-2219-9528 www.planet.com.tw
IPOE-165
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2020 PLANET Technology Corp. All rights reserved.
6
advertisement
Related manuals
Frequently Answers and Questions
What is the purpose of the Planet IPOE-165 device?
How many ports does the IPOE-165 have?
What is the maximum PoE power output of the IPOE-165?
What is the maximum distance between the IPOE-165 and a powered device?
What kind of enclosure does the IPOE-165 have?
What is the operating temperature range of the IPOE-165?
advertisement