advertisement
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
PIECE
Part List and Hardware List
DESCRIPTION PICTURE QUANTITY
A HEADBOARD 1X
B
H1
METAL LEG
NUT 螺母
2X
4X
H2 WASHER 垫片
H3
H4
BIG CROSS BOLT
SMALL CROSS BOLT
大螺杆
小螺杆
THE HARDWARE THAT IS NEEDED TO CONNECT THE HEADBOARD TO
THE BED FRAME IS INCLUDED.
12X
4X
4X
Model# MCR4000's & MCR4600's Series Headboards
Product Dimensions: 61.41"W x 3.94" D x 54.33" H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
H3
H2
H3 H2
Step 1
The hardware needed to connect the legs (B) to the headboard (A) are 4 big cross bolts (H3) and 4 washers (H2).
H4 H2 B H2 H1
Step 3
The hardware needed to connect the headboard to the bed frame are 4 small bolts (H4), 8 washers (H2), and 4 nuts (H1)
B A B
Step 2
Attach the two legs (B) to the headboard (A) using 4 big cross bolts (H3) and 4 washers (H2).
The vertical slots at the lower part of the leg must be facing the outside of the bed.
B
H1
H2
H2
H4
Step 4
Attach the legs of the headboard (B) to the bed frame by fixing them together through the 2 holes in the bed frame and the vertical slot in the leg using 4 small bolts (H4), 8 washers (H2) and 4 nuts (H1)
advertisement