BENQ-SIEMENS E81 Manual
Advertisement
Advertisement
Safety precautions ............................ 6
Phone overview ................................. 9
Standby display icons ......................11
Getting started ................................ 12
Removing the back cover ...............12
Inserting the SIM card ....................12
Inserting the battery ........................13
Installing the back cover .................13
Micro SD card ..................................13
Inserting the micro SD card .......... 13
Removing the micro SD card ......... 13
Charging the battery .......................14
Switching the phone on/off ............14
Switching the phone on ................. 14
Entering the PIN ............................. 14
Standby mode ................................. 14
Signal strength ................................ 15
Offline mode ................................... 15
Emergency call (SOS) ..................... 15
Switching the phone off ................. 15
General instructions ....................... 16
Connectivity .....................................16
DRM ..................................................16
Menu control ...................................16
Navigating the menus .................... 16
Menu speed dialling ....................... 17
Tabs ................................................. 17
Standard functions ..........................17
Options menu ................................. 17
Mark mode ...................................... 18
Fast list search ................................. 18
PIN codes ........................................ 19
PIN control ......................................19
Change PIN ......................................19
Table of contents 1
Change PIN2 ................................... 19
Change phone code ........................ 19
Text input ........................................ 20
Changing input methods ............... 20
Text input without T9 .................... 20
Text input with T9 .......................... 21
T9 word suggestions ...................... 21
Adding a new word to the T9 dictionary ........................................ 21
Correcting a word .......................... 21
Special characters ........................... 22
Text edit menu ................................ 22
Text templates ................................. 22
Creating text templates .................. 22
Inserting text templates ................. 22
Calling ............................................. 23
Making a video call ......................... 23
Video call options ........................... 23
Dialling with number keys ............ 23
Ending a call .................................... 24
Setting the earpiece volume .......... 24
Dialling previous numbers ............ 24
Listening to voicemail .................... 24
Accepting a call ............................... 24
Rejecting a call ................................ 25
Handsfree talking ........................... 25
Swapping between two calls .......... 25
Establish a second connection ...... 25
Swapping calls ................................ 25
Incoming calls during a call .......... 25
Ending calls .................................... 26
Conference ...................................... 26
Ending a conference ....................... 26
Private call ...................................... 26
2 Table of contents
Call options ......................................27
Full/split screen .............................. 28
Contacts .......................................... 28
Accessing Contacts ......................... 28
All contacts .......................................29
Adding a new contact ..................... 29
Additional options for editing a contact ............................................. 30
Groups ..............................................30
Adding a new group ....................... 31
Adding members ............................ 31
Viewing members in a group ........ 31
Editing a group ............................... 31
SIM contacts ....................................31
Adding a new SIM contact ............. 31
Moving a SIM contact to the phone .................................... 31
Filter ..................................................32
Options menu for contacts ............32
Fast contact search ..........................34
Dialling a contact ............................34
Voice-activated dialling ..................34
Recording a voice tag ..................... 34
Using voice-activated dialling ....... 34
Call records ..................................... 35
Redial number .................................35
Options for call records .................. 35
Duration/charges .............................35
Charge settings ............................... 36
Camera ............................................ 36
Start the camera ...............................36
Displayed information ....................37
Current picture/video settings ...... 37
Remaining memory ........................ 37
Taking pictures/videos ................... 37
Settings prior to taking pictures/recording videos .............. 37
Taking pictures ............................... 37
Recording videos ............................ 37
Reviewing pictures/videos ............. 37
Camera options ............................... 38
Picture settings/Video settings ..... 38
Create message ................................ 39
SMS/MMS ....................................... 39
About SMS ...................................... 39
About MMS .................................... 39
Writing/sending an SMS ............... 39
Writing/sending an MMS .............. 40
SMS/MMS options ......................... 41
E-mail ............................................... 41
Writing/sending e-mails ................ 42
E-mail options ................................ 42
Inbox ............................................... 43
Receiving messages ......................... 43
SMS ................................................. 43
MMS ................................................ 43
Cell Broadcast service .................... 43
E-mail .............................................. 43
WAP push ....................................... 43
Inbox structure ............................... 43
Reading an SMS, MMS, CB ........... 44
Reading E-mail ............................... 45
WAP push ....................................... 47
Message lists .................................... 48
Drafts ................................................ 48
Outbox ............................................. 48
Sent messages .................................. 48
Message settings ............................. 48
SMS settings .....................................48
SMS profiles .................................... 48
Auto header .................................... 49
Auto signature ................................ 49
Save sent items ................................ 49
Auto delete SMS ............................. 49
Emoticons ....................................... 49
Text size ........................................... 49
MMS settings ...................................50
MMS profiles .................................. 50
Home retrieval/Roaming retrieval 50
Req. read report .............................. 50
Req. deliv report ............................. 50
Delivery time ................................... 50
Validity period ................................ 51
Hide number ................................... 51
Anon. messages .............................. 51
Allow read report ............................ 51
Allow deliv report ........................... 51
Creation mode ................................ 51
Auto signature ................................ 51
Save sent items ................................ 51
Allow adverts .................................. 51
Emoticons ....................................... 51
Text size ........................................... 51
Max msg size ................................... 51
E-mail settings .................................52
Activating an account .................... 52
Deleting an account ........................ 52
Editing an account .......................... 52
CB settings ........................................54
Receive broadcasts ......................... 54
Cell info display .............................. 54
Topic list .......................................... 54
Table of contents 3
Voice mail ....................................... 55
Voicemail settings .......................... 55
Listening to voicemails .................. 55
Internet ........................................... 56
BenQ-Siemens ................................. 56
Enter URL ........................................ 56
Bookmarks ....................................... 56
History ............................................. 56
Settings ............................................. 56
Multimedia ..................................... 56
Look and feel .................................. 56
Security ........................................... 57
Certificates ...................................... 57
WAP push ....................................... 57
Browser profiles ............................. 57
Browser options .............................. 58
Navigation in the browser ............. 59
Ending a connection ...................... 59
Download ........................................ 59
Java Application Manager (JAM) . 60
Google ............................................. 61
Google Search ................................. 61
Google Maps ................................... 61
Organiser ........................................ 62
Calendar ........................................... 62
Daily view ....................................... 62
Weekly view .................................... 62
Monthly view .................................. 62
Calendar options ............................ 63
Calendar settings ............................ 63
New event/Edit event ..................... 63
Information on the alarm .............. 64
4 Table of contents
Dictat. machine ................................64
New recording ................................ 64
Playback .......................................... 64
Set as call ringtone .......................... 64
Time zones .......................................65
Synchronisation ...............................65
Remote sync .................................... 65
Active profile ................................... 66
Sync mode ....................................... 66
Apps to synchronise ....................... 66
Sync log ........................................... 66
Extras .............................................. 67
SIM toolkit (optional) .....................67
My menu ..........................................67
Using My menu .............................. 67
Change My menu ........................... 67
Alarm clock ......................................67
Set alarm ......................................... 67
Apply alarm to every day ............... 67
End alarm ........................................ 68
Calculator .........................................68
Unit converter ..................................68
Converting the units/currency ...... 68
Currency settings ............................ 69
Sound recorder ................................69
Stopwatch .........................................69
Media player ................................... 69
Music .................................................69
Playback .......................................... 70
Create new playlist ......................... 70
Pictures .............................................70
Display picture ................................ 70
Videos ...............................................70
Bookmarks .......................................71
Media player options ......................71
My stuff ........................................... 72
Folder structure .............................. 72
Options for organising folders ...... 74
License manager ............................. 74
Using the phone as a card reader .... 75
Settings ............................................ 75
Profiles ............................................. 75
Activating a profile ......................... 75
Profile settings ................................ 75
Profile options ................................ 76
Headset ........................................... 76
Ringtones ......................................... 76
Volume ............................................ 76
Calendar/Alarm clock .................... 76
Messages ......................................... 76
Shutdown sound ............................ 77
Themes ............................................. 77
Display ............................................. 77
Set Wallpaper/Logo ........................ 77
Screensaver ..................................... 77
Greeting msg .................................. 78
Backlight time ................................. 78
Brightness ....................................... 78
Power save ...................................... 78
Vibration .......................................... 78
Connectivity .................................... 78
Bluetooth® ....................................... 78
Data counter ................................... 80
Connect.profiles ............................. 80
Internet profiles .............................. 80
Linger time ..................................... 80
Shortcuts .......................................... 81
Setting a function shortcut ............ 81
Setting a speed-dial key .................. 81
Start function/call number using shortcuts .......................................... 81
Call setup ..........................................81
Hide ID ............................................ 81
Call waiting ..................................... 82
Diverts ............................................. 82
Any key answer ............................... 82
Auto redial ...................................... 82
Video calls ....................................... 82
Display call timer ............................ 83
Phone ................................................83
Language ......................................... 83
T9 mode .......................................... 83
Key tones ......................................... 83
Info tones ........................................ 83
File system ....................................... 83
Phone identity ................................. 84
Device manager (DM) .................... 84
Master reset .................................... 84
Clock .................................................84
Time/Date ....................................... 84
Time zone ........................................ 84
Time format .................................... 84
Date format ..................................... 85
Show clock ...................................... 85
Auto time ........................................ 85
Security .............................................85
Auto key lock .................................. 85
Only protect. SIM ........................... 85
PIN codes ........................................ 85
This SIM only .................................. 85
Barrings ........................................... 85
License manager ............................. 86
Downld prompt .............................. 86
Table of contents 5
Network ........................................... 86
Network info ................................... 86
Choose network .............................. 86
Auto network .................................. 86
Preferred network .......................... 86
Mode selection ............................... 86
Fast search ...................................... 86
Data con. auto attach ..................... 87
Accessories ...................................... 87
Car kit .............................................. 87
Headset ........................................... 87
Charge via USB ............................... 87
Mass storage ................................... 87
Mobile Phone Manager .................. 88
Questions & Answers ...................... 89
Customer Care ................................ 92
Care and maintenance .................... 94
Product data .................................... 95
SAR .................................................. 96
License Agreement ......................... 97
Menu tree ...................................... 100
6 Safety precautions
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal requirements and local restrictions when using the phone. For example in aeroplanes, petrol stations, hospitals or whilst driving.
Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep a distance of at least 20 cm/9 inches between the phone and pacemaker. Whilst using the mobile phone, hold it to the ear furthest away from the pacemaker. For more information consult your doctor.
Always keep the phone and accessories out of reach of small children.
Small parts such as the SIM card, dust cap, lens ring and lens cap as well as the Micro SD
Card can be dismantled and swallowed by small children.
Do not place the phone near to electromagnetic data carriers such as credit cards and floppy disks. Information stored on them could be lost.
Do not look at the LED (e.g. flash LED) with optical magnifiers because of radiation.
This product complies with
IEC/EN 60825-1 “Safety of
Laser Products” for LED Class
1M products; such products are safe under reasonably foreseeable operating conditions.
Permanent hearing loss may occur if you use ear- or headphones at high volume.You can adapt over time to a higher volume, which may sound normal but can be damaging to your hearing. Set your volume to a safe level. If you experience ringing in your ears, reduce the volume or discontinue use of your system.
Tones, music and handsfree talking are reproduced through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the handsfree function. Otherwise you risk serious permanent damage to your hearing.
The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed.
The power supply must be plugged into an easily accessible AC mains power socket when charging the battery. The only way to turn off the charging device after charging the battery is to unplug it.
You may only open the phone to replace the battery (100 % mercury-free), SIM and Micro
SD Card. You must not open the battery under any circumstances. All other changes to this device are strictly prohibited and will invalidate the guarantee.
The phone may cause interference in the vicinity of TV sets, radios and PCs.
Use only original accessories.
This will avoid potential risks to health or property and ensure compliance with all relevant regulations.
Safety precautions
All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
This crossed-out wheelie bin symbol on the product means the product is covered by the
European Directive
2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. It is a precondition for re-use and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your local council, waste disposal service or the shop where you purchased the product.
7
8 Safety precautions
• Only use original batteries and charging devices. Otherwise you risk serious damage to health and property (battery explosion, for instance).
• All batteries can cause property damage, injury or burns if a conductive material, such as, jewellery, keys or beaded chains touch exposed terminals. The material may complete an electrical circuit and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. Your batteries are supplied with a protective cover. Please attach this cover to your batteries when detached from the phone and not in use.
• Do not dispose of batteries in fire as they may explode.
Improper use will invalidate the guarantee! These safety instructions also apply to original accessories.
As mobile devices offer a range of functions, they can be used in positions other
than the head, such as on the body. In this case, separation distance of
1.5 cm is required.
Bluetooth ®
Your phone has a Bluetooth interface. This
makes it possible to establish a wireless connection with your phone and a headset,
a car kit or other Bluetooth-enabled devices.
In order to establish a secure link between the devices and to prevent a third party from having access to your phone, you should observe the following points:
• The initial connection between two devices, what is called "pairing", should take place in familiar surroundings.
• Both devices must be able to identify themselves one time by using a password/PIN. To ensure sufficient security, you should choose a 16-digit number combination for a password that would be difficult to guess (if a PIN has not been assigned).
• An automatic connection acceptance
("connection without confirmation") should only be used in exceptional cases.
• In general, only trustworthy devices should be linked in order to minimise security risks.
• You should restrict the "visibility" of your phone if possible. This will make it much more difficult for unknown devices to establish a connection with your phone.
To do this, in the Bluetooth menu, set the option Bluetooth visibility from On to Off
(page 79).
• The name of your phone is transmitted in a Bluetooth connection. The factory default is the "Bluetooth ID". The first time Bluetooth is activated, or later in the
Bluetooth menu, you can change this name (Bluetooth name, page 79).
• If Bluetooth is not needed, this function should be deactivated.
Before using Bluetooth accessories, or a mobile phone inside a vehicle, check the vehicle user guide for any limitations on the use of these products.
Phone overview
Press to adjust volume.
Micro SD card slot
Connection socket
For charger, headset, USB cable, etc.
Earpiece
Display
/ Softkeys
The current functions of these keys are shown on the bottom line of the display
Power on/off/End key
• Press and hold to turn the phone on/off.
• Press to end a call.
• Press to reject an incoming call.
• Press to cancel dialling.
Call key
• Press to send or answer calls.
• In standby mode: press to open call records.
Phone overview 9
10 Phone overview
Media player key
• In standby mode: press to open the
Media player
menu.
• During music playback: press to send music to background/return to
Media player screen.
key
• Press to delete entered text.
• Press and hold to delete text quickly.
Voicemail key
In standby mode: press and hold to dial your voicemail number.
OK key
• In standby mode: press to open the main menu.
• In lists and menus: start a function/confirm selection.
Number keys
Press to enter numbers.
Press and hold to start a shortcut function/speed-dial a number.
Navigation key
• In standby mode: press to start shortcut functions
• In lists, messages and menus: scroll up, down, left and right.
Asterisk key
• Press to enter an asterisk ("*").
• Press and hold to activate/deactivate the Silent mode.
key
• Press to enter "#".
• Press and hold to activate/deactivate keypad lock.
• While dialling a number, press and hold to add a wildcard ("?") to the
key
While dialling a number, press and hold to make an international call
(enter "+").
Microphone
Camera key
• Press to activate camera mode.
• If the camera is active: press to take photos.
Camera lens
Speaker
Self-portrait mirror
Phone overview 11
Standby display icons
3G signal strength.
Battery charge level, for example, 100%
GSM signal strength
New SMS/MMS messages
New e-mail message
Alarm set
Keypad locked
General profile active
Silent profile active
Meeting mode active
Outdoor profile active
User profile 1 active
User profile 2 active
Car kit profile active
Headset profile active
Divert
Bluetooth active
Micro SD card loaded
Voice mail received
12 Getting started
Getting started
Removing the back cover
1. Use a thin object, such as, your fingernail to press in at the groove just below the cover on the bottom edge of the phone as illustrated.
2. Lift the cover off the phone.
2. Swing the SIM card holder upright as illustrated.
3. Slide the entire SIM card into the card holder, with the metal contacts of the
SIM card facing the battery bay and the cut corner at the top right.
Inserting the SIM card
A SIM card can be easily damaged if its metal contacts become scratched.
Therefore, take special care when holding or inserting it.
1. Slide the SIM card holder backward to release it.
4. Swing the SIM card holder back onto the battery bay.
5. Slide the SIM card holder forward so that it locks in place.
Inserting the battery
1. Slide the top end of the battery down into the top end of the battery bay.
2. Press the bottom end of the battery down so that it locks in place.
Getting started 13
Micro SD card
The micro SD card significantly extends your phone’ memory capacity. This allows you to save picture/video files, sound recordings, etc. You can also use the micro SD card to save any other files.
You can access the list of folders and files in the
My stuff
Inserting the micro SD card
1. Swing the cover of the micro SD card slot out.
2. Insert the entire micro SD card into the slot. Ensure that the card's metal contacts face upwards.
Switch off your phone before removing the battery.
Installing the back cover
1. Insert the tabs on the inside top edge of the back cover into the slots on the top edge of the phone
2. Press the cover down onto the phone to lock it in place.
3. Close the cover of the slot.
Removing the micro SD card
1. Swing the cover of the slot out.
2. Press on the micro SD card to release it.
3. Close the cover of the slot.
14 Getting started
Charging the battery
The battery is not fully charged when first unpacked.
1. Plug the charger connector into the connection socket on the bottom edge of your phone. Note that the connector is inserted with its metal contacts facing up.
2. Plug the charger into a power outlet and charge for at least two hours (the battery is 90% charged in two hours).
3. Once the phone is fully charged, remove the charger from both the power outlet and the phone.
• Do not remove the battery while charging.
• When the battery is discharged, the charging may not start immediately when you plug in the connector. Wait
10 to 15 minutes for the phone to begin charging.
• Charging is only possible within a temperature range of 0°C (+32°F) to
+50°C (+122°F).
An alert sound warns you when the battery is low.
Switching the phone on/off
Switching the phone on
1. Press and hold to switch the phone on. The phone will display a
Entering the PIN
1. Enter your PIN using number keys and confirm with .
When the PIN code entered has been accepted, the phone will automatically search for the designated network. This search process may take a few seconds.
• The SIM card can be protected with a
4- to 8-digit PIN.
• The SIM card will be locked if you enter the PIN incorrectly three times in a row.
You must now enter the PUK (Personal
Unblocking Key) for the SIM card in order to unlock it. Please contact your service provider to obtain a PUK.
• To activate/deactivate/change PIN, see
Standby mode
The phone is in standby mode and is ready for use when the name of the service provider is displayed on the standby screen.
Press to return to standby mode from any situation.
Signal strength
The signal strength is indicated in the top left corner of the display. The number of bars displayed indicates the strength of the signal (the more bars the stronger the signal).
Strong signal.
The signal strength meter will show no bars if the phone is not able to detect the designated network or links to a network that you are not authorised to use. You will only be able to make emergency calls in this case.
Offline mode
You can operate many phone functions in offline mode but you are not connected to any network (you are not available for incoming calls and you cannot initiate a call).
To switch offline mode on/off, see below.
Emergency call (SOS)
You can make an emergency call even if your phone is locked or cannot access your network, or if there is no SIM card inserted, as long as you are within range of a network of the type supported by your phone.
1. Enter 112 (the international emergency number).
2. Press .
Getting started 15
Switching the phone off
Press phone off.
Or and hold to switch the
Press briefly and select one of the switch-off options.
Switch off
Switch phone off. Phone switches on automatically if alarm or calendar event occurs.
Offline mode
Phone is not switched off but is not connected to any network.
Phone & alarms off
Phone will not power on when an alarm or calendar event occurs while off. This mode is useful in hospitals, for instance, or on an airplane.
16 General instructions
General instructions
Connectivity
Your phone supports different methods for transmitting data in the mobile network:
• The fastest method is UMTS (Universal Mobile Telecommunications
System). If you use UMTS, you can make high-quality video calls. You can be permanently connected to the
Internet. Some service providers do not yet support this service.
• GPRS (General Packet Radio Service) is another method for transmitting data in the mobile network. With
GPRS you can also be permanently connected to the Internet if the network has sufficient capacity.
• GSM (Global System for Mobile
Communications) is a fully digital standard for mobile networks mainly used for voice calls and text messages
(SMS).
The different connectivity methods are automatically used depending on the surrounding network and your provider. Depending on your provider you may set which method to use.
DRM
This phone features Digital Rights Management (DRM) technology. DRM allows copyright-protected audio/visual content transmissions for playback in computers, portable devices and network devices, while protecting them from unauthorised use.
Menu control
Navigating the menus
The phone features various functions and settings organised in menus and submenus.
To select a function from menus:
1. Press in standby mode to open the main menu.
2. Use and to scroll up, down, right or left through the main menu. For example, scroll to
Settings .
3. Press (
Select
) to enter the
Settings menu.
4. Press to scroll to a submenu, for example,
Ringtones
.
5. Press or the
Ringtones menu.
(
Select
) to enter
In this user manual, the steps needed to reach a menu are shown in condensed form, for example:
Settings
>
Ringtones
.
Menu speed dialling
All menu functions are numbered internally according to the position of the menu icon/option on the display. A function may be selected directly by entering these numbers in sequence.
For example, select
Settings
>
Ringtones in standby mode:
1. Press .
Tabs
Tabs allow fast access to information and applications.
Press to switch between tabs.
Press to leave the current input field/entry and switch to the next input field/entry.
While editing a tab, press navigate within the input field.
to
General instructions 17
Standard functions
Options menu
The list below contains standard functions offered by various options menus.
Press ).
<New entry>
Create new entry.
Save
Store entry.
Change
View
Details
Open options list.
Display entry.
• Display additional information about the selected entry.
• Display properties of the file.
Delete/
Delete all
Exit
Edit
Delete entry/delete all entries after confirmation.
Exit application.
Open entry to edit/open input field to edit.
Text input meth.
Text edit menu
Sort by
Open input method menu
Open text edit menu
Select sort criterion (for example, alphabetical, type, status, sender, date/time).
Set as For example, set picture as wallpaper, melodies as ringtones.
18 General instructions
Rename
Send
Create message
Reply/
Reply to all
Capacity/
Memory status
Rename selected entry.
Select transmission type
(for example, MMS, SMS, e-mail or Bluetooth) and send file.
Select transmission type and create message.
The sender becomes the recipient.
Display memory status for relevant application, phone, SIM card or the micro SD card.
If memory is insufficient start Memory assistant
Mark mode
In some applications (for example, Contacts/ My Stuff) one or more entries in a list can be highlighted to carry out a function jointly.
Press ) and select Mark
.
Press : select entry/entries.
Mark options
Different functions will be offered depending on the actual situation.
Press ).
Mark/
Unmark
Mark all
Mark/unmark selected entry.
Mark all entries.
Unmark all Unmark all marked entries.
Delete marked
Send marked
Delete all marked entries.
Send marked messages
(for example, e-mails from draft folder).
Retrieve marked
Retrieve marked e-mails
(if only header is retrieved).
Fast list search
Pressing number keys while you are in alphabetically ordered lists (for example, Contacts, My Stuff) opens a fast search window.
Enter text to jump quickly to the entry that corresponds most closely to the text entered.
PIN codes
Settings
> >
PIN codes
The phone and SIM card are protected against misuse by several security codes.
Keep these confidential numbers in a safe place where you can access them again if required.
• The SIM card will be locked if you enter the PIN incorrectly three times in a row.
You have to enter the PUK for the SIM card in order to unlock it. Please contact your network operator to obtain a PUK.
• If the PUK has been lost, please contact your network operator.
PIN
PIN2
PUK
PUK2
Phone code
(Personal Identification
Number) Protects your SIM card from unauthorised use.
This is needed to set the charge detail display and to access additional functions on special SIM cards.
(Personal Unblocking Key)
Used to unlock SIM cards after the wrong PIN has been entered incorrectly three consecutive times.
Protects your phone from unauthorised use.
Must be entered at the first security setting.
PIN codes 19
PIN control
The PIN is the password provided by your network operator and is usually requested each time the phone is switched on. You can deactivate this feature but you then risk unauthorised use of your
SIM card. Some network operators do not permit deactivating the PIN control.
Activating/deactivating PIN status
1. Select PIN control .
2. Enter PIN and confirm with .
Change PIN
You can change the PIN to any 4- to 8digit number you find easier to remember.
1. Enter current PIN code and confirm with .
2. Enter new PIN code and confirm with .
3. Re-enter new PIN code and confirm with .
Change PIN2
(Display only if PIN2 is available).
Proceed as described under Change PIN .
Change phone code
You define the phone code (4 to 8 digits) when you activate a phone-codeprotected function for the first time. It is then valid for all phone-code-protected functions.
20 Text input
To change the phone code proceed as described under Change PIN .
Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. Contact the Service Centre.
Text input
Changing input methods
When an editing screen is displayed, the current text input method is indicated in the upper right corner of the display.
The phone has the following input methods: abc Lowercase text input without T9.
Abc Text input without T9 with the first letter capitalised.
ABC Uppercase text input without T9.
T9abc Lowercase text input with T9.
T9Abc Text input with T9 with the first letter capitalised.
T9ABC Uppercase text input with T9.
123 Numeric input.
• Press briefly: swap between input methods.
• Press and hold : input method menu is displayed.
Text input without T9
• Press a number key repeatedly until the required letter appears. After a brief interval the cursor will advance.
Example:
Press once briefly to write the letter a
, twice to write b
, etc. Press and hold to write the number.
• Press briefly to delete the letter left of the cursor or marked text.
Press and hold to delete text quickly.
• Press / to move the cursor.
once/repeatedly:
0 + - ( ) @ / : _
Press and hold: insert 0 .
• Press : insert space.
Press twice: insert a line feed
Press three times/press and hold: insert
1
.
Text input with T9
T9 word suggestions
T9 predicts the most probable word from a sequence of keys you press.
1. Simply press the keys where the relevant letter is located once.
2. If several options are found in the dictionary for a key sequence
(a word), the most probable is displayed first.
3. If the first highlighted word is not the one you want, press ( << T9 ...
).
The displayed word is replaced with a different word. If this word is also incorrect, press repeatedly until the correct word is displayed.
4. To end a word, press to insert a blank, or press to move the cursor to the right of the word.
Adding a new word to the T9 dictionary
If a desired word is not in the list of word suggestions (as indicated by a dotted line, for example,
---
), the word is not yet included in the T9 dictionary. You can add the word to the dictionary.
1. Press ) or press and hold to select
Text edit menu > Spell word .
Text input 21
2. Enter the word and confirm with . The word may now be entered without T9 support.
The next time you enter the same word, it is in the list of suggestions.
Correcting a word
1. Move left or right, word by word, until the required word is highlighted.
2. Press ( << T9 ...
) to scroll through the T9 word suggestions again.
Alternatively, press to delete the character to the left of the cursor and display a new possible word.
T9 ® Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,187,480,
5,818,437, 5,945,928, 5,953,541, 6,011,554,
6,286,064, 6,307,548, 6,307,549, 6,636,162 and
6,646,573; Australian Pat. Nos. 727539, 746674 and 747901; Canadian Pat. Nos. 1,331,057,
2,302,595 and 2,227,904; Japan Pat.
No. 3532780, 3492981; United Kingdom Pat.
No. 2238414B; Hong Kong Standard Pat. No.
HK1010924; Republic of Singapore Pat. No.
51383, 66959 and 71979; European Pat. Nos.
0 842 463 (96927260.8), 1 010 057
(98903671.0), 1 018 069 (98950708.2); Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1. People's Republic of China Pat.
Application Nos. 98802801.8, 98809472.X and
96196739.0; Mexico Pat. No. 208141; Russian
Federation Pat. No. 2206118; and additional patents are pending worldwide.
22 Text input
Special characters
Press are shown.
briefly: special characters
• Press characters.
/ to navigate to
• Press to insert the selected character or a line feed if is selected.
Text edit menu
Press and hold edit menu
.
: open the Text
Insert symbol
Mark
Insert a special character or a line feed.
You can highlight text in order to copy and paste it to a different place.
Copy/Paste
Copy/paste highlighted text to a different place.
Input language
Select the language in which you want to compose your message.
If you select Automatic , the Input language is based on the display language.
Only if T9 is activated
Spell word Open the spell box and add new words to dictionary.
Text templates
Text templates are short excerpts of texts that you can insert in your messages (SMS, MMS).
Creating text templates
Messages > Templates > Text
The list of existing templates is displayed.
1. Press ) to select
New template .
2. Write text.
3. Press to select Save .
• To create a new SMS directly from the
Templates menu:
1. Select a text template.
2.
Press or press
( Options ) and select New message .
• To set a template as header/signature for new messages:
1. Select a text template.
2.
Press ) and select
Set as header/signature .
Inserting text templates
Messages > Create message
>
SMS
/
MMS
1. Write a message.
2. Press ) to select
Insert text .
3. Select Template .
Calling 23
4. Select a text template from the list and confirm with . The text template is inserted in the message.
Calling
You can use your phone to make conventional (voice) calls as well as video calls. However, it is not possible to make a voice call and a video call at the same time.
Making a video call
To initiate a video call (in standby mode):
1. Press and select Video call
.
2. The phone switches to video call mode. A preview is displayed.
You can enter a number (see
) or enter a number from
Contacts
via the
Options
menu.
3. Press or to make the call.
• You can also select a number from call records to make a video call
(
see Dialling previous numbers ).
• For options available during a video
The called party as well as the network have to be capable of handling video calls.
If you are calling a number that does not meet these requirements you will be offered the option of making a voice call instead.
Video call options
Press ) in video call mode.
Video call Call the number entered.
Save Save the number entered to a new or existing contact.
View View the entered number’s contact information, if any.
Insert pause
Insert "P" for extension dialling.
Contacts Enter a number from the contact list.
Dialling with number keys
1. Enter a phone number in standby mode.
2. Make a voice call: press or .
Make a video call: press
(
Options
) and select
Video call
.
3. The number displayed is dialled.
24 Calling
Entering international dialling codes :
• Press and hold until "+" is displayed. Then enter country and area codes.
Dialling with number extension :
1. Enter the number.
2. Enter press (
Options
) and select
Insert 2-s pause
to insert "P" .
3. Enter the extension number.
4. Press or (voice call).
You can also use the Contacts list to dial a
Ending a call
Press End call ). You will be asked whether or not to save the number to a new or existing contact.
Setting the earpiece volume
(Only possible during a call)
Press or the volume key to adjust the volume.
Dialling previous numbers
1. Press to open call records.
2. Press to scroll to the preferred tab:
All calls
/
Dialled
/
Missed
/
Received calls
.
3. Press the list.
to pick out a number from
4. Press number.
or to call the
To make a video call press
(
Options
) and select
Video call
.
Listening to voicemail
Press and hold .
You will be asked to set the voicemail number if it is not stored on your SIM card.
Accepting a call
Press , to accept a call.
or (
Answer
)
Video call
If the incoming call is a video call and
Show my image
is deactivated (default,
Do you want to show your video image?
is displayed. You have the following options:
• Press ): your video is shown to the caller.
age is shown to the caller (page 83).
• If Any key answer is activated
(page 82), you can accept the call by
pressing any key.
• To avoid the disturbance caused by a ringing phone, press and hold to switch
Silent mode
on/off ( indicates Silent mode is activated).
Warning!
Please make sure you have accepted the call before holding the phone to your ear.
This will avoid damage to your hearing from loud ringtones.
Rejecting a call
Press
Reject
).
Handsfree talking
You can put the phone aside during a call and hear the caller via the loudspeaker.
Press ) and select
Hands free to activate/deactivate handsfree talking.
Warning!
Always switch off "handsfree talking" before holding the phone to your ear. Otherwise you will damage your hearing.
Additional information
The speakerphone (loudspeaker) is activated by default during a video call.
Swapping between two calls
( Network-support-dependent and not available during video calls)
Establish a second connection
1. Press ) and select
Hold call . The active call is put on hold.
2. Dial a new number and press or .
Calling 25
Alternatively, dial the new number and press or . The active call is put on hold.
Swapping calls
You can swap between calls when the new connection is established:
Press .
Or
Press ) and select Swap .
Incoming calls during a call
You will hear a special tone during the
call (page 82). You have the following
options:
Accepting the waiting call in addition to the first
Press ,
Swap
)to accept the waiting call. The current call is put on hold.
To swap between the two calls when two connections are established, press
.
Or
Press ) and select
Swap
.
Rejecting the waiting call
Press (
Reject
).
Accepting the waiting call, ending the current call
1. Press to end the current call.
or
(
Answer
) to accept the new call.
26 Calling
Ending calls
or ) to end the active call.
Or
Press ) and select Drop to select the call to end.
If
Return to held call?
displays, you have the following options: call.
Conference
(Network-support-dependent and not available during video calls)
Call up multiple parties one by one and link them together in a multiparty call.
Once a call has already been established:
1. Press ) and select Hold call
. The active call is put on hold.
2. Dial a new number and press or .
Alternatively, dial the new number and press or . The active call is put on hold.
3. When the second call is established, press ) and select
Conference
. The held call is joined.
Ending a conference
Ending all calls
Press .
All calls in the multiparty conversation are ended.
Ending one call
Press ) and select Drop to select the call to end.
Private call
You can remove a party from a conference and make a private call to them while the conference is put on hold.
Press ) and select
Private
.
Then select the entry for the private call.
Swapping between the private call and conference
Press ) and select Swap .
When a private call is finished
• Press : end the private call and return to the conference.
• Press ) and select
Conference . The private call is joined to the conference again.
Call options
The following functions are only available during a call
Press ) or .
Mute call/
Mute sound
The person on the other end of the line cannot hear you (muting). In video calls your video is still shown on the other end of the line.
Hands free
Call via the loudspeaker.
Upgrade to video/
Switch to voice
To Contacts
Change the current voice call to a video call or vice versa. The current call is ended and a new connection with the same partner is established.
Save the number
To new contact
/
To exist.
(existing) contact
.
Main menu
Open the main menu.
Calling 27
Not available during video calls:
Hold call
Hold current call.
Swap
Conference
Drop
Swap between calls.
End a call in a conference.
Private
Make a private call in a conference.
DTMF
Enter tone sequences
(numbers) for remote inquiries to an answering machine.
Only during video calls:
Mute video
The incoming video is muted and the video
mute image is sent (see page 83) .
Pause inc.
/
Pause outg.
Pause the incoming video (of the other party) or outgoing video
(yours). The menu entry changes to
Resume inc.
/ Resume outg.
Full/split screen
Select the video presentation on your display.
See details below.
Frame rate
Adjust the number of frames per second the camera will capture.
White balance
Adjust the sensitivity to light.
28 Contacts
Flicker adjustment
Adjust the sensitivity to indoor lightening flicker rate.
Send picture/
Send video
Select a picture/video from the
My stuff
menu and show it to the person on the other end of the line.
Speakerphone
Activate speakerphone
(loudspeaker).
Full/split screen
Select video presentation on your display. You have the following options:
Them fullscreen
The video of the other party is shown in full screen mode. Your own video is not displayed.
Splitscr. -- me sm.
The video of the other party as well as your own video are displayed. The video of the other party is shown in full screen mode and your video is shown in an additional small frame.
Splitscr. -- me lg.
The video of the other party as well as your own video are displayed. Your video is shown in full screen mode and the video of the other party is shown in an additional small frame.
Me fullscreen
Your video is shown in full screen mode.
The video of the other party is not displayed.
Contacts
You can store contacts with a variety of phone and fax numbers as well as additional address details.
The contacts may contain the following types of entries:
• Contacts saved on the phone.
• SIM contacts saved on the SIM card
• Distribution lists: shortcuts for communication with more than one contact (for example, sending SMS).
Contacts may belong to several distri-
• Groups: contact categories (for example, shared ringtone). A contact can belong to one group only
Accessing Contacts
In standby mode press
Contacts
.
and select
Or
Press to (default
For fast access, contacts are organised on four tabs. Press to switch between tabs.
All contacts
All contacts (including
SIM contacts) and distribution lists.
Groups
All groups.
SIM contacts
Filter
Contacts saved on the
SIM card.
Apply different filter criteria to all contacts.
All contacts
All contacts are displayed in alphabetical order. Distribution lists are displayed additionally.
A contact can include four numbers, four e-mail addresses, two URLs, two fax numbers and two postal addresses.
Adding a new contact
Opening a contact entry
• In the
All contacts
tab: select
New entry .
• In standby mode:
1. Enter a number
2. Press ) and select
Save
.
3. Select
To new contact
.
4. Select a phone type.
Filling contact information
The input fields are organised on four tabs:
General info
Private
First and last name, important numbers (private, business, mobile phone).
E-mail address, fax number, address and notes.
Contacts 29
Business
Office information and address.
Personal
Ringtone, picture, group, birthday and display name.
Within the tabs:
1. Press to select input fields.
2. Fill in input fields.
Assigning media files
In some input fields (ringtone, picture) you can assign ringtones and pictures.
Press to select a media field (for example, picture) and confirm with .
Depending on the media type you can either record a new media file via camera or sound recorder or select a file from the corresponding
My stuff
folder
Saving a contact
1. Press ) and select Save contact
.
2. Press to confirm save notification.
30 Contacts
Additional options for editing a contact
Press ).
Set as default
Set selected field as default for that type (for example, default number or e-mail for use).
Switch tab...
Select contact tab for more input fields.
Add birthday /
Remove birthday
Set date
If no birthday is entered, open birthday field. If birthday is entered, delete after confirmation.
If birthday field is selected, open calendar to set the birthday.
With a number field selected:
Insert 2-s pause
Insert a pause P by an extension
followed number .
Insert wildcard
Record voice tag /
Re-record voice
Play voice tag
Delete voice tag
Insert wildcard ("?"). See below.
Start recording a voice tag
Start playback of current voice tag.
Confirm to delete a voice tag.
Adding numbers with wildcards
Digits may be replaced by a " ?
" (wildcard) when numbers are entered in contacts:
Press ) and select Insert wildcard
.
Or
Press and hold to insert
"
?
"
.
These wildcards must be replaced with numbers before dialling (for example, with the extension numbers in a phone system).
Calling a number containing a wildcard ("?")
1. Select the number from contacts.
2. Press .
3. Enter numbers to replace " ?
" .
4. Press dialled.
or . The number is
Groups
Groups are collections of contacts that can be used to categorise contacts. A group can have the same incoming call alert.
SIM contacts cannot belong to a group, you have to copy them to the phone contacts first.
The following groups have already been created and can be renamed but not deleted:
Family
,
Friends
,
Office
,
VIP
.
Adding a new group
You can add personal groups.
1. Select
New group
and enter the name of a new group.
2. Press ) and select
Save
.
Adding members
1. Press to select a group. The number of entries is displayed in the second line when highlighted.
2. Press ) and select
Add new member . A list of all contacts that are not already in the group is displayed.
3. Select new members and confirm with .
selection.
Viewing members in a group
Select a group and press .
Editing a group
1. Press ) and select Edit .
2. Rename the group and attach an audio ringtone and a picture.
Contacts 31
SIM contacts
Contacts saved on the SIM card are managed on this tab. SIM contacts contain less information than contacts saved on the phone.
Adding a new SIM contact
1. Select
New entry and fill in the following fields:
First & last name
Contact name
Storage location
Save to SIM / Protected SIM .
Special SIM cards can save numbers in a protected area
(protected SIM) that requires the entry of PIN2.
Private phone
Record number
Phone number.
Available SIM record number.
2. Press ) and select
Save
.
Moving a SIM contact to the phone
1. Press to select a SIM contact.
2. Press ) and select Edit .
3. Press ) and select Add more fields
. The SIM contact is converted to a regular contact saved on phone memory.
.
You cannot convert protected SIM contacts.
32 Contacts
Filter
Depending on the selected filter, contacts and distribution lists can be listed on the filter tab.
Press ) and select Filter .
The following filter criteria are available:
•
Voice dialling
: list all contacts that have a voice tag associated with one or more of their numbers.
•
Video teleph.
: list contacts with a number set as the default for video
• URL
• Birthday
•
On phone
: all contacts stored on the phone (except SIM contacts).
• Distrib. (Distribution) lists
Press firm with
to select a criterion and con-
.
A list is displayed with contacts that contain the chosen feature, for example, all contacts including a birthday entry.
Options menu for contacts
Different functions are offered depending on the current situation. These functions can be applied to the entry currently selected as well as to multiple selected entries.
Press ).
Distribution lists
New distr. list Enter name.
You can rename the distribution list and attach a ringtone and a picture using the Edit option.
Add to distr. list
Add contact/ distribution list/group to a new or existing distribution list. If an SIM contact selected, confirm to move the contact to phone memory.
Add new member
Open a contact list. Select contacts and add them to the selected distribution list.
Groups
New group Enter name.
Add to group Add contact(s) to a new or existing group. If an SIM contact selected, confirm to move contact to phone memory.
SIM contacts
Add more fields
Convert SIM contact to a regular contact saved on phone memory (not for protected SIM contacts).
Special numbers
Your provider may supply you with special numbers.
Select classes you want to show/hide ( network-support-dependent).
Business card
Create visit. card
Create a business card, which is a contact containing your own contact information.
The business card is displayed outside the sort order at the top of the contact list. You cannot add the business card to a distribution list or group.
Set as biz card
Selected contact is set as a business card. If a business card already exists, it is converted into a regular contact. SIM contacts cannot be set as business cards.
Undo biz card Convert selected business card to a regular contact.
Media field selected
Play ringtone/video/
View picture
Start playback of current ringtone/video/ View picture.
Contacts 33
Replace ringtone/video/ picture
Remove ringtone/ video/picture
Select new ringtone/video/picture.
Confirm to delete current ringtone/video/picture from contacts.
General options
Video call
Make a video call to the selected number.
Open web site
If contact information contains URL, start the browser and load the URL.
Send contact
Contacts are sent/received as a vCard via Bluetooth, MMS, or e-mail.
Set as vid. allow'd/
Undo vid.allow'd
Set a number as default for video call dialling. When you select
Video call
to call contact, this number will be dialled by default.
(Not available for SIM contacts.)
Save options
Depending on the save location, select
Copy / Move to SIM : only
SIM information is saved while copying/moving contact from phone to
SIM.
Copy
/ move to phone
.
Protected SIM contacts, special numbers and the business card cannot be copied or moved to another save location.
34 Contacts
Save location
Select
SIM card
/
Phone memory
as the default save location.
Duplicate
Add new contact with duplicate information.
Find
•
Contacts search
: Enter text/number and confirm with .
• Filter contacts : Display contacts and distribution lists according to the selected filter.
Synchronise Initiate synchronisation.
For standard functions see page 17.
Fast contact search
In the contact list, pressing number keys opens a fast search window.
Enter text to jump quickly to the entry that corresponds most closely with the entered text.
Dialling a contact
1. Scroll to a contact in Contacts list.
2. Press : make a voice call to the
(default) number displayed.
Press ( Options ) and select
Video call
: make a video call to the video enabled number.
If several numbers are stored and no default number is set (not for SIM contacts), press to view all numbers and select one to call.
Voice-activated dialling
You can dial numbers from the contacts by speaking the name. SIM contacts, distribution lists and groups cannot have a voice tag.
You can associate one voice tag to each number of a contact.
Recording a voice tag
Record the voice tag in a quiet environment.
1. Open the
All contacts
tab.
2. Select a contact.
3. Press ) and select
Edit
.
4. Select a number input field.
5. Press ) and select
Record voice tag .
6. Press ) to start recording.
7. Speak the name. Repeat the name after playback.
Using voice-activated dialling
Press and hold in standby mode.
Speak the name after the signal tone.
Call records
( Network-support-dependent)
Press in standby mode and select
Call records .
Or
Press .
The different call information is listed on five tabs:
All calls, Dialled calls
,
Missed calls
,
Received calls and
Duration
/ charges
.
Each list displays the 100 most recent calls.
A caller’s name is displayed if it is stored as a contact.
Redial number
1. Select a record’s tab (for example,
Missed calls
).
2. Select entry.
3. Press or : make a voice call to the number.
Press (
Options
) and select
Video call
: make a video call.
Call records 35
Options for call records
Press ).
Call
Make a voice call to the selected number.
Video call
Make a video call to the selected number.
View contact/
Add to Contacts
If number is saved as contact, view the contact.
If number is not yet saved, create a new contact.
Details Display call type (video/voice call), number, name, time/date and duration of the call.
For standard functions see page 17.
Duration/charges
(Network-support-dependent)
You can display the call duration and the currency and rate of a call. You can set the currency and rate for charge display.
These call types are displayed: Last call
/
Outgoing calls
/
Incoming calls
.
The following information is displayed for the selected call type: the date/time and the duration and charges. The number of recorded calls is also displayed for all incoming and all outgoing calls.
36 Camera
Cost information is not displayed if cost display is disabled or the currency is not entered.
Reset all incoming/outgoing calls lists
Press ) to reset the current list.
Charge settings
Select Settings .
Currency
(PIN2-protected)
1. Enter the currency code
(up to three characters).
2. Press ) and select Save .
Personal rate
(PIN2-protected)
1. Enter the per minute rate.
2. Press ).
To enter "." press .
Display costs
Activate/deactivate cost display.
Account limit info
(PIN2-protected)
The account limit is not supported by all SIM cards. An appropriate notification is displayed if your SIM card does not support the account limit.
• Account limit
Activate/deactivate the account limit.
• Enter maximum units
Enter the maximum units for the account.
• Reset remaining
Confirm notification to reset the account limit.
Camera
You can view photos/videos recorded with the integrated camera immediately:
• Use a picture as wallpaper.
• Send a picture/video via MMS, e-mail or Bluetooth.
• Save pictures/videos on the phone or on the micro SD card.
Start the camera
Picture mode
Press in standby mode and select
Camera
>
Picture mode
.
Or
Press the camera key the phone.
Video mode
Press
on the side of
in standby mode and select
Camera
>
Video mode
.
Or
Press ) (default shortcut).
The current preview image is displayed.
Displayed information
Current picture/video settings
The selected resolution is displayed in the top line.
The following symbols are displayed:
Current brightness setting.
Current zoom level.
Flash (when activated).
Night mode
(when activated).
Self timer (when activated).
Active self timer, flash and night mode are indicated only in picture mode.
Remaining memory
The following memory information is displayed:
• Memory location: pictures/videos can be saved either on the phone or on the micro SD card
To change the save location see
.
• Remaining memory: picture count/available record time on the current memory location. The remaining memory depends mainly on the selected resolution and the motif.
Camera
Taking pictures/videos
Settings prior to taking pictures/recording videos
37 brightness. Brightness can be set in seven levels (-3 to +3).
• Press levels.
: zoom in/out in seven
For further settings see options menu.
Taking pictures
1. Start the camera in picture mode.
2. Press or the camera key .
Recording videos
You can record up to five minutes.
1. Start the camera in video mode.
2. Press or the camera key start recording.
: or
( Pause / Resume ): control recording.
4. Press ( Stop ): end recording.
Reviewing pictures/videos
Start video playback
Press ( Options ) and select Play video
.
38 Camera
• Press or the volume key :
Control volume during playback.
• Press (
Stop
) : Stop playback.
Save pictures/videos
Press to confirm save notification.
The picture/video is displayed.
The picture/video is saved with a name, the date and the time in
Media player
/
My stuff > Pictures / Videos
Return to view finder
Press : open the view finder to take another picture/record another video.
Delete pictures/videos
Press ( Discard ): delete a picture/video and open the view finder.
Camera options
The following functions are available, depending on the current situation.
Press (
Options
).
New picture /
New video
Open the view finder to take another picture/record another video.
Play video
View pictures/
View videos
Play a recorded video.
Open the corresponding
Media player
tab to view
Picture mode /
Video mode
Message mode
Switch between picture and video mode.
Message mode is optimised for sending video via MMS/Bluetooth:
• record time ten seconds.
• Low resolution.
Message mode is activated automatically if video mode is started from an
MMS application.
Flash Turn the flash on/off for picture mode.
Audio record Turn the microphone on/off for video mode.
Night mode Turn night mode on/off for picture mode.
Self timer Picture is taken approx.
10 s after triggering. For the last three seconds, you will hear a signal tone each second.
Picture settings /
Video settings
Open settings (see below).
For standard functions see page 17.
Picture settings/Video settings
Resolution
A setting can be made for the quality of the picture/video regardless of the preview image resolution.
Default name
Enter default file name (up to four characters).
Save location
Select default save location:
Phone memory / Card .
Frame rate (for video settings only)
Set the number of frames per second the video should capture:
Low
/
High
.
White balance
Select:
Auto
/
Indoor
/
Outdoor
.
Flicker adjustment
Adjust the sensibility to indoor lightening flicker rates: Off / 50 Hz / 60 Hz .
Create message 39
Create message
You can create SMS and MMS messages and e-mails.
Messages Create message
SMS/MMS
About SMS
You can transmit and receive long messages on your phone.
The phone will automatically convert long SMS messages that you send to
MMS. Long SMS messages you receive are automatically divided into concatenated SMS messages.
About MMS
The Multimedia Message Service
(MMS) enables you to send texts, pictures/videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged into a
"slide show".
Ask your service provider whether this service is available. You may need to register separately for this service.
Writing/sending an SMS
Messages Create message
> SMS
1. Enter text/add items
40 Create message
2. Press and select
Add recipient
.
3. Select a contact from Contacts list
( Add fr. Contacts ) or enter a number manually.
4. Press
Send .
• The following is displayed on the top display line: text entry mode, number of segments needed to send the current message and number of remaining characters.
SMS options
Different functions will be offered depending on the current situation.
Press (
Options
).
Add item Picture
/
Video
/
Sound
: select a file from the corresponding
My stuff
fold-
If you try to add items that cannot be sent via SMS, the message is converted to MMS after confirmation.
Send options Set Status report /
Validity period / SMS type / Send with for the
Further functions, see page 41.
Writing/sending an MMS
Messages Create message
>
MMS
1. Enter text/add items
2. Press and select
Add recipient
.
3. .Select a contact from Contacts list
( Add fr. Contacts ) or enter a number/e-mail address manually.
4. Press
Send .
or press and select
The following is displayed on the top display line: text entry mode, number of remaining characters and size of the message.
MMS options
Different functions will be offered depending on the current situation.
Press (
Options
).
Add item
•
Picture
/
Video
/
Sound
/:select any file from the corresponding
My stuff
folder
a new slide.
• Text : enter text to a new slide.
•
Contact:
select a contact and add as a vCard. (You cannot attach more than one vCard per MMS.)
Add subject
Enter subject.
Preview MMS
Start preview mode
(see below).
Send options
Set
Read Report
,
Delivery report
,
Validity period
,
Priority
and
Delivery time
for cur-
rent MMS (see also MMS settings, page 50).
Further functions, see below.
Preview MMS
You can change the presentation of the message if you start
Preview MMS
.
Press (
Options
).
Play again
Start playback of all slides.
Page duration
Select the time interval each slide is displayed when presented.
Order page
Swap the current slide with the previous/next.
SMS/MMS options
Different functions will be offered for both SMS and MMS depending on the current situation.
Press (
Options
).
Create message 41
Add recipient
Specify the number/ e-mail address of the recipient.
Edit recipient
Edit the number/e-mail address entered.
Create item
•
Take picture
/
Record video
: take a photo/record a video
message.
• Record sound : make a sound recording
message.
Insert text
Save as
• Template
•
Contact details
: open contact and select contact information.
•
Draft
: save a message in the draft folder.
• Template : save a message as text/MMS template.
Remove picture/video/ sound/ contact/ recipient
Remove a picture/video/ sound/ contact/recipient from a message.
For standard functions see page 17.
Your phone features an e-mail program
(client). You can use it to create and receive e-mails. To create new e-mails you have to configure at least one e-mail
42 Create message
Writing/sending e-mails
Messages Create message
>
1. Enter text/add items
2. Press and select
Add recipient
3. Select a contact from Contacts list
(
Add fr. Contacts
) or enter a number/e-mail address.
4. Press
Send
.
E-mail options
Different functions will be offered depending on the current situation.
Press ( Options ).
Add subject Enter a subject.
Add recipient • From Contacts : select a contact from
Contacts list.
•
Enter e-mail addr.
: enter an e-mail address manually. T9 is not available.
Edit recipient
Edit the address entered.
Edit subject
Edit a subject.
Attach item
•
From My stuff
: select any file from the
My stuff
folder.
• From Contacts : select a contact and add as a vCard. (You cannot attach more than one vCard per e-mail.)
Add Cc Add contact(s) of copy recipient(s).
Add Bcc Add contact(s) of copy recipient(s). Bcc recipients are not visible for other recipients.
Remove item/ recipient
Remove a highlighted attachment/recipient.
Save as draft Save an e-mail in the draft folder.
Add signature Add a signature at the current cursor position.
Send options Set Req. deliv. receipt: ,
Request read receipt: ,
Priority: for current
e-mail (see E-mail settings, page 52) .
For standard functions see page 17.
Inbox
The inbox contains all MMS, SMS,
CB (Cell Broadcast), e-mail and WAP push messages received on the phone.
Messages Inbox
Or
Press to open the inbox in standby mode (default shortcut).
Receiving messages
A notification is displayed when new messages are received.
SMS
A notification is displayed if a new
SMS is received. New messages are automatically saved in the Inbox.
Press ( View ) or message.
to read new
MMS
An MMS is received in two steps: first the MMS notification, then the MMS.
If a new MMS message is available for downloading, the MMS notification is displayed including number/contact and subject of the MMS. You can download the MMS immediately or later.
You can change MMS settings to download new MMS messages immediately without request.
Inbox 43
Cell Broadcast service
Some service providers offer Cell Broadcast services (CB) that supply you with messages on the activated topics.
CB messages are automatically received when the function is activated.
CB messages are displayed in standby mode depending on the current setting.
E-mails are not received automatically.
Before an e-mail can be read, it must be
retrieved from the server (page 45).
WAP push
WAP push messages are provided by special service centres. WAP push messages are automatically received or rejected depending on the current setting.
Inbox structure
For fast access, the inbox is organised on three tabs:
• MMS, SMS, CB
• WAP push messages
Make a call to the sender: select SMS,
MMS or e-mail and press .
44 Inbox
Reading an SMS, MMS, CB
All new messages are listed in chronological order.
Select a message and press .
Numbers, e-mail addresses, vCards and other saveable objects are automatically highlighted.
Use these keys while reading a message
Set volume.
Switch sound on/off.
Only MMS:
Navigate within a slide.
Switch to next/ previous slide.
Play media file.
Options on the In-SMS/MMS/CBS tab
Different functions will be offered depending on the current situation.
Press (
Options
).
View
Read an SMS, MMS,
MMS notification or CB.
Downld message
Reply /
Reply to all
Download an MMS if
MMS notification is received.
Select
SMS
/
MMS
and create reply message.
Forward
Forward a message to another recipient.
• SMS: select
SMS / MMS .
• CB: create SMS.
• MMS: select MMS .
Attached media files are automatically removed if you forward as SMS.
Mark as unread
Display message in bold type.
Add to Contacts
Save the sender as a
For standard functions see page 17.
Additional options while reading a message
Different functions will be offered depending on the current situation.
Press (
Options
).
Send
CB: if an e-mail address is highlighted select
MMS
/
.
Send MMS
MMS: if an e-mail address is highlighted create a new MMS.
Open link
If a URL is high-lighted: start browser.
Save link
If a URL is high-lighted: start browser and add
URL to bookmarks.
Play again
MMS: start playback video/audio slide.
Save Picture/
Video/sound
Select the save location
(phone/micro SD card).
Downloaded file is saved in corresponding
My stuff
folder
Call number
If a number is highlighted: dial the number.
Save to
Contacts
Save numbers displayed in the message or vCard as a contact
Save appoint.
If a calendar object is selected: save as a calen-
For standard functions see page 17.
Downloading ringtones and logos
You can receive links for downloading ringtones, logos, screensavers, animations and information about applications with an SMS. Highlight this link and, by pressing , start the download. Please check that the dial-in access is configured.
Remember that ringtones/logos may be protected by DRM.
Inbox 45
Reading E-mail
A list of accounts is displayed if more than one account is configured.
Before an e-mail can be read, it must be retrieved from the server.
The files listed and the options menu vary depending on the receive server type of the selected account.
POP3 account
The Inbox on the phone contains all the e-mails that are in the Inbox on the
POP3 server.
You can configure whether or not an e-mail is deleted on the server when deleted on the phone.
IMAP4 account
The Inbox lists e-mails as well as subscribed folders (for example, mailboxes). You can subscribe to various folders on the IMAP4 server. E-mails are retrieved only from the subscribed folders.
If you delete e-mails on the phone, they are automatically deleted on the server and vice versa.
For details on e-mail settings, see page 52.
46 Inbox
Options on the Inbox-E-mail tab
Different functions will be offered depending on the current situation.
Press ( Options ).
View Display an e-mail.
If only headers are retrieved, retrieve the body and display the e-mail.
Retrieve e-mail Retrieve a new e-mail for a selected account (see details below).
Retrieve all accts
Account settings
Retrieve a new e-mail for all configured accounts.
Open account settings for the highlighted account.
If no account is configured create a new account.
Reply/
Reply to all
Create a new e-mail with the sender/all recipients as receiver.
Forward
Forward an e-mail to another recipient.
Add to
Contacts
Save the e-mail sender as
POP3 account only:
Delete on server
Delete an e-mail on the server only. The local copy is retained.
IMAP4 account only:
Subscr. to folders
See details below.
Move to folder
You can move e-mails from one subscribed folder to another. The move is synchronised with the server the next time you retrieve e-mails.
Unsubscribe
E-mail within the folder is deleted on the phone only. Synchronisation of e-mails to server is stopped.
Display order
Select
Folders first
/
E-mail first
.
For standard functions see page 17.
You can set the maximum size of downloaded e-mails.
Retrieve e-mail
Depending on the download mode, either entire e-mails or only the headers are retrieved, or you may be asked whether the entire e-mail or only the header should be downloaded. The number of retrieved e-mails is displayed.
IMAP4 accounts: only e-mails in the subscribed folders are retrieved.
Subscr. to folders
(IMAP4 accounts only)
You have to subscribe to folders on the receive server in order to retrieve e-mail from these folders.
Inbox 47
All subscribed and unsubscribed folders on the receive server are listed. Only two levels of folders are supported.
1. Press firm with
to select folder(s) and con-
to subscribe/unsubscribe to folders.
2. Press (
Options
) and select
Subscr. to marked .
Options while reading an e-mail
Press ( Options ).
Voice call Start a voice call to a sender (if number is available).
Send e-mail If an e-mail address is highlighted: create a new e-mail.
View / Play
Go to URL
/
Download
View/play attachment. If not downloaded yet: download attachment (IMAP4 accounts only).
Delete on phone Delete downloaded attachment on the phone. POP3 account: the attachment is permanently deleted on phone and cannot be downloaded again.
If URL is highlighted: start the browser and load the URL.
Save
Select the save location (phone/ micro SD card).
• Downloaded file is saved in the corresponding My stuff folder.
• Selected vCard is saved as a contact.
• Selected calendar object is saved as a calendar event.
For standard functions see page 17.
WAP push
The following messages are displayed:
• Service Indication (SI)
• Audio, video, image, text
• Service loading
Reading WAP push message
Read messages/information about received data/software. Where required start download.
Service loading message
Depending on your setting, you are connected to the browser and the service is automatically loaded.
Message with audio/video/image content
The message can contain attached files.
You can view/play and save the attached content.
48 Message lists
Message lists
Messages are displayed the same as in the Inbox. The most recently edited/sent message is displayed at the top of the list.
Drafts
Messages
>
Drafts
The list is organised on two tabs:
SMS/MMS and E-mail .
You can save a message as a draft while creating it.
Outbox
Messages
>
Outbox
The list contains all messages you failed to send and is organised on two tabs:
SMS/MMS
and
.
Sent messages
Messages
>
Sent messages
The list contains all sent messages and is organised on two tabs: SMS/MMS and
.
Message settings
Configure SMS, MMS, e-mails, cell broadcast (CB) and voice mail.
SMS settings
Messages
SMS
>
Message settings
>
SMS profiles
The SMS parameters are configured in up to the different profiles. Profiles can be renamed, edited and set as the default.
The first five profiles are saved on the SIM card, the last five profiles are saved on the phone memory. The profiles saved on the phone are not changed when replacing the SIM card.
Setting the default profile
If a profile is already configured: Select profile and press as the default.
to set the profile
Edit profile
1. Select profile.
2. Press ( Options ) and select Edit .
Rename
Message centre
Rename SMS profile.
Enter number of message centre.
Recipient
Set a default recipient for the profile. Select
Add fr.
Contacts
and select contact/ distribution list, or enter a number. This recipient is automatically added to each SMS.
Validity period
If SMS could not be delivered during this period, it is automatically deleted from the message centre.
Status report
A status report is sent when a message is delivered successfully. If
Ask on send
is activated, a prompt is displayed when SMS is sent.
Send confirmation
Set whether or not a confirmation is displayed for messages successfully sent.
SMS access
Select
GSM
/
GPRS
mode for sending/receiving
SMS.
SMS memory
Select
Phone
/
SIM
as the default save location for incoming SMS.
SMS type
Select delivery type
( network-support-dependent).
Reset profile
Press (
Options
) and select
Reset profile .
A predefined profile cannot be reset if it was locked by your provider.
Message settings
Auto header
If the function is activated the Header
template (page 22) is automatically in-
serted at the start of any SMS created.
Auto signature
Auto delete SMS
If the function is activated, the oldest
SMS message in the Inbox is deleted when a new SMS message arrives.
Emoticons
49
If the function is activated, the Signature
template (page 22) is automatically
inserted at the end of any SMS created.
Save sent items
If the function is activated, all SMS messages sent are automatically saved in the
Sent folder.
Emoticons are little symbols (smilies) expressing your feelings. If this function is activated, emoticons are automatically displayed as little pictures.
Text size
You can set the displayed size of the text in the SMS Viewer.
50 Message settings
MMS settings
Messages
>
MMS
>
Message settings
MMS profiles
MMS parameters are configured in up to five different profiles. You will receive the necessary data from your service provider.
Setting the default profile
If a profile is already configured: select the profile and press default profile.
to set it as the
Edit profile
1. Select profile.
2. Press ) and select Edit .
Name
Connect. profile:
Enter the profile name.
Select the profile provided by your provider
Internet profile:
Select the profile provided by your provider
Relayserver
URL:
Enter the Internet address.
Secure rs URL: Enter the Internet address.
Reset profile
Press ) and select Reset profile
.
A predefined profile cannot be reset if it was locked by your provider.
Home retrieval/Roaming retrieval
Configure when new MMS messages are to be downloaded from the message server for Home and Roaming retrieval.
Automatic Messages are automatically downloaded as soon as an MMS notification is received.
Always ask When an MMS notification is received, you are asked whether or not to download it.
Restricted (For Home state only)
When an MMS notification is received, only the notification is displayed.
Req. read report
If this function is activated, a report is sent back when the recipient reads the
MMS message for the first time.
Req. deliv report
If this function is activated, a report is sent back when the recipient has downloaded the MMS message.
Delivery time
Select how long an MMS message should be held on the server before sending it to the recipient.
Validity period
If an MMS message could not be delivered during this period, it is automatically deleted from the server.
Hide number
Your number is withheld from the recipient.
Anon. messages
If set to Reject , anonymous
MMS messages are automatically rejected.
Allow read report
( Network-support-dependent)
If this function is activated, requested read reports are enabled.
If set to Yes confirm the charge notification.
Allow deliv report
If this function is activated, requested delivery reports are enabled.
If set to Yes confirm the charge notification.
Creation mode
You can restrict the content that can be added to an MMS.
The following settings are possible:
Message settings 51
Free
You can add any content to the MMS.
Warning
You are warned when attempting to add content to an MMS that cannot be sent.
Restricted
An error message is displayed if you attempt to add content that is not compliant.
Auto signature
Save sent items
Allow adverts
If the function is deactivated,
MMS-based advertisements are automatically rejected.
Emoticons
Text size
Max msg size
The size restriction affects only MMS messages created. It does not restrict the message download.
This setting is not available if
Creation mode is set to Free .
52 Message settings
Depending on the current creation mode, a warning is displayed or creation is restricted if the limit is exceeded.
E-mail settings
Before using the e-mail service you must set the server access and your e-mail parameters. You will receive the necessary data for this from your service provider.
The e-mail parameters are configured in up to five different accounts. One account might be predefined by your provider. You cannot edit predefined accounts.
Messages
> E-mail .
> Message settings
Activating an account
If an account is already configured: select the account and press activate it.
to
Deleting an account
Press ( Options ) and select Delete .
All e-mails in the Inbox, Drafts and Sent folders and all attachments belonging to the deleted account are deleted.
Editing an account
Edit the account according to the information from your provider.
Press ( Options ) and select Edit .
User info
Your name: Your name.
E-mail address: Your e-mail address
Reply-to address:
User ID:
Additional e-mail address to use for replies.
Your login name for the e-mail server.
Password:
SMTP user ID: Your login name for the send server. Only if
SMTP authenticate: is enabled in “Connection info” settings
Send server password:
Your password for the e-mail server.
Only if SMTP authenticate: is enabled: your password for the SMTP server.
Message settings 53
Connection info
You can configure accounts with two different receive server types: POP3 and
IMAP4. The configured accounts may have different server types.
Data service provider:
Receive server type:
Select connection profile.
Select POP3 / IMAP4 .
POP3 server: If you want to use a POP3 server, enter the Internet address of the receive server. You may leave the input field empty if you are not using a POP3 server.
POP3 server port:
Enter the port number of the POP3 receive server
(default: 110).
POP3 uses
SSL/TLS:
Activate/deactivate encryption in communication with the POP3 server.
IMAP4 server: If you want to use an
IMAP4 server, enter the
Internet address of the receive server. You may leave the input field empty if you are not using an
IMAP4 server.
IMAP4 server port:
Enter the port number of the IMAP4 receive server
(default: 143).
IMAP4 uses
SSL/TLS:
Activate/deactivate encryption for communication with the IMAP4 server.
SMTP server:
Enter the Internet address of the send server.
SMTP server port:
SMTP uses
SSL/TLS:
Enter the port number of send server (default: 25).
Activate/deactivate encryption in communication with the send server.
SMTP authenticate:
Activate/deactivate authentication on the send server.
Msg preferences
Download mode:
Select Only headers /
Full message / Ask user .
Max msg size
(KB):
Enter the maximum e-mail size that is retrieved on the phone.
For POP3 this value includes attachments, for
IMAP it includes only the e-mail body.
Copy on serv.(POP3):
(POP3 accounts only)
Select Yes / No . If No selected, the e-mail is deleted on the server when it has been downloaded to the phone.
is
54 Message settings
When del.ph.
(POP3):
(POP3 accounts only)
Select
Del. on server
/
Leave on serv.
If
Del. on server is selected, the e-mail is deleted on the server when it is deleted on the phone.
IMAP4 accounts always delete e-mail on the server when deleted on the phone.
Save sent message:
Save a copy of the sent e-mails in the local Sent folder.
To save sent e-mails on a server you should set your own address as
CC.
Include orig on reply:
Req. deliv. receipt:
Include the original text in the reply message.
A report is sent back when an e-mail is delivered successfully.
Request read receipt:
A report is sent back when the recipient reads an e-mail.
Add signature
Select No e-mail / New e-mail / All e-mails .
Create signature
Enter signature and confirm with .
CB settings
Messages
>
Message settings
>
Cell broadcast
Receive broadcasts
Activate and deactivate the CB service.
The standby time for the phone will be reduced if the CB service is activated.
Cell info display
Select whether or not the local cell information should be displayed in standby mode.
Topic list
You can configure the broadcast messages types you want to receive. The list of configured topics is displayed. You can add/remove topics.
Press ( Options ).
Topic status
•
Receive
: new messages are received and stored in the Inbox. No notification is displayed.
• Receive and notify : new messages are received and stored in the Inbox.
A notification is displayed in standby mode.
•
Do not receive
: messages on this topic are rejected.
Add topic: index
Remove topic
Enter topic index number.
Delete list entry.
Voice mail 55
Voice mail
(Network-support-dependent)
Most service providers supply you with a mailbox in which a caller can leave a voice mail for you.
If the voice mail service is not part of your service provider's standard package you will need to register for it and possibly set the voice mail manually.
The following sequence may vary from service provider to service provider.
Voicemail settings
Messages
>
Message settings
>
Voicemail
Voicemail no.:
Enter your voicemail number.
Notification
Activate and deactivate notification display for messages indicating new voice mail entries.
Listening to voicemails
Press and hold in standby mode.
Or
Messages Voicemail .
56 Internet
Internet
Internet
Download the latest information on display options for your phone from the
Internet. You can download games and applications to your phone. Internet access may require registration with the service provider.
The browser activates with the preset option as soon as you call up the
function. Settings may be specified/
pre-assigned by the service provider.
In a GSM network, an incoming call pauses the data connection. The session is resumed automatically after you reject or end the incoming call. A call and a data connection should be possible at the same time in a UMTS network.
BenQ-Siemens
Start the browser and display the official
BenQ-Siemens portal.
Enter URL
Enter the URL and confirm with
Start the browser and display the
Internet site entered.
Changing the prefix
1. Press ( Options ) and select
Prefix
.
2. Select a prefix or select
Custom
and enter a prefix.
.
Bookmarks
Display the list of bookmarks stored in the phone.
Select the bookmark and confirm with to call up a URL.
History
Display the list of most recently visited
Internet domains and pages. Up to ten domains can be stored with 30 pages per domain.
1. Press
2. Press
: select the history entry.
: call up the URL.
Settings
Multimedia
Choose whether or not to show/play images/sounds or download objects embedded on the Internet pages.
Images
Select
Show images
/
Don't show .
Sounds Select Play sounds /
Don't play
.
Objects
Select
Dwnld objects
/
Don't downld .
Press ( Options ) and select Save .
Look and feel
Font size Select Small / Medium / Large .
Text wrap Select Char. bounds.
/ Word bounds.
Scroll step
Select Single line / Half page /
Whole page
.
Set the increment by which pages are scrolled when navigating within the Internet page.
Connection timeout
Set the maximum wait-time for the Web response. Select
60 seconds
/
90 seconds
/
No timeout .
Press ( Options ) and select Save .
Security
Secure prompt
Display a security request when leaving a page with a secure connection to enter a page that is insecure.
ID cache Set whether or not the browser should store your user ID and password.
Cookies Enable / Disable cookies.
Link referral
Allow
/
Do not allow
the current page to see the previous
URL.
Press (
Options
) and select
Save
.
Certificates
Display the list of stored certificates.
Current
Display the current certificate information.
Internet 57
Certificates list
1. Press to display the selected certificate information, for example, serial number, algorithm, validity period.
2. Press (
Options
) and select
Enable / Disable for the highlighted certificate.
WAP push
You can accept or reject message requests from trusted and untrusted sources. If
Ask first
is set, you can decide whether or not the content should be loaded for each message request.
Trusted content
/
Untrusted content
Select Fetch content /
Ignore
/
Ask first
.
Lockout time
Enter a lockout time.
Press ( Options ) and select Save .
Browser profiles
You can choose one of five browser profiles. A browser profile is a superset of an Internet profile, a connection profile, a startpage URL and the show/hide title region setting.
The current browser profile is marked.
Activate profile
Press to select a profile and confirm with .
Edit profile
Press (
Options
) and select
Edit
.
58 Internet
Profile Name
Enter profile name.
Internet profile / Connection profile
Start page
Set the current URL as the startpage for the profile.
Press ( Options ) and select Save .
Reset profile
Press ( Options ) and select Reset profile
.
The browser profile is reset to an unconfigured state. A predefined profile cannot be reset if it was locked by your provider.
Browser options
Different functions will be offered depending on the current situation.
Press ( Options ).
Prefix
Display Mode
Change URL prefix.
• Normal Screen : Web contents are displayed to fit the screen.
•
Wide Screen
: Web contents are displayed exactly as they are arranged on the current page.
• Smart Screen : The phone switches between the normal screen and wide screen according to the current web contents.
Forward
Load the following page in the current session, if there is one.
Back
Home
Bookmarks list
Add bookmark
Display the list of stored bookmarks.
Add current page to bookmarks. Enter name and address and select whether to save the bookmark for offline browsing.
Enter URL
Call up the preset homepage for the current profile.
Enter the URL for direct link to an Internet address.
Save items
Load the previous page in the current session, if there is one.
Show the list of items
(images/sounds) of current page. Select
Save
from Options menu. Select save location and save selected item in
My stuff folder.
History
Display recently visited pages.
Reload page
Send link
Reload the current page.
Display the URL of the current page for sending via SMS/MMS/e-mail.
Internet 59
Information
Privacy
Set as start page
Browser settings
About
Shows URL, type and size of the current page.
Select the item to clear.
Set the current page as browser startpage.
Open browser settings
Display information on browser, e.g. version.
For standard functions see page 17.
Navigation in the browser
Select a link (if the link is a phone number, initiate a call).
If link is a phone number, initiate a call.
(
Back
) Press to go back a page.
• One input field/link forward/back.
• Scroll one line.
Tab through active content
(links on page).
Ending a connection
the connection and close the browser.
Your Internet browser is under license from:
Download
Downloads are offered on the Internet.
Once downloaded, the content is available to you on the phone.
You cannot download more than one content at the same time.
There are three download categories:
• Web browsing.
• Open Mobile Alliance (OMA): download media content that has associated digital rights. Normally you have to pay for the content. The browser interacts with the DRM
• Download of Java applications: Java applications are decrypted and processed by the Java Application Manager (JAM). JAM starts automatically when you start the download
(see below).
60 Internet
• An incoming call pauses the data connection. The download is automatically resumed after you reject or end the incoming call.
• A request is displayed if the downloaded content type is not supported.
Confirm if you want to continue the download.
• If you download an application you have to confirm the signer of the application before the download is started.
• When the download is completed, you can either continue browsing or open the downloaded content and use it
(for example, set picture as wallpaper, play sound/video).
• Downloaded content is listed in the corresponding folder in
My stuff
(page 72). You can select to save
downloaded applications in the games or applications folder.
Java Application Manager (JAM)
Display the list of Java applications currently available on the phone and manage these applications.
Press to select the desired application.
Different options are available depending on the application selected.
Press (
Options
).
Select
Launch
Open the selected link.
Launch the selected application that has been fully installed.
Open suite
Select a MIDlet application from the MIDlet suite.
Move
Move the MIDlet application to another folder.
Attributes
Display the MIDlet application information, for example, name/ version.
Security
Edit the security settings of the MIDlet application. You can set the MIDlet access rights on the phone depending on the application.
Reinstall
Download and reinstall the MIDlet application
(update).
Java settings
Select connection profile
For standard functions see page 17.
Google 61
Additional information
You can use the browser to download applications (e.g. ringtones, games, pictures, animations) from the Internet.
BenQ Mobile excludes all warranty and liability claims in respect of or in connection with any applications subsequently installed by the customer and any software not included in the original delivery package. This also applies to functions enabled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or consequential damage of whatever nature resulting from the use of this application. For technical reasons, such applications and subsequent enabling of certain functions are lost in the event of the device being replaced/re-supplied and may be lost if it is repaired. In such cases, the buyer is required to download or enable the application again. Please ensure that your phone has Digital Rights Management (DRM) so that downloaded applications are protected from unauthorised reproduction. These applications are then exclusively intended for your phone and cannot be transferred from this even to create a backup. BenQ Mobile offers no warranty or guarantee nor does it accept any liability for the customer's ability to download or enable applications again or to do so free of charge.
Google Search
Start the browser and link to the
Search portal and enter keywords to find your desired Web sites.
Google Maps
Google Maps is a downloadable application that incorporates driving directions, maps, and satellite imagery, enabling you to find desired locations via your phone.
Before using the Google menu, be sure you have selected the correct Connection
profile and Internet profile (page 80)
.
62
Organiser
Organiser
Organiser
Calendar
Organiser > Calendar
You can enter events in the calendar.
The time and date must be set for the calendar to work correctly.
The display type (am/pm or 24h) de-
pends on your clock settings (page 84).
The calendar supports three views: daily, weekly and monthly. The current hour/ day/week is marked when you switch the view.
Daily view
Display events for the current day. You can scroll from 12 am to 11 pm. A vertical line indicates the event duration.
One day forward/back.
One hour forward/back.
Birthdays are displayed with subject
"Birthday" in a single hour slot at the day
start time (page 63). If a birthday event
is highlighted, press to open the contact.
Weekly view
Events are shown as vertical coloured bars on the horizontal hour division.
The first two upcoming or current events for the current day are displayed below the calendar.
One day forward/back or one week forward/back if Monday or Sunday is highlighted.
Forward/back two hours through the day.
Display daily view for the highlighted day.
Monthly view
Week numbers are displayed in the first column. The first two upcoming or current events for the current day are displayed below the calendar.
One day forward/back or one month forward/ back if the first or last day is highlighted.
One row up/down or one month forward/ back if the first or last row is highlighted.
Display daily view for the highlighted day.
Calendar options
Different functions are offered depending on the current view.
Press ( Options ).
New event Set up a new event
(see below).
Edit event Edit the highlighted event
(see below).
Delete event Before deleting a repeating event: select
This occurrence /
All occurrences .
Daily/Weekly/
Monthly view
Switch to the daily/ weekly/monthly view.
Go to date Enter the date and confirm.
Synchronise Initiate calendar synchro-
Settings Open the calendar settings (see below).
Delete events Delete all events for the day/week/month. If these including repeating events, only the current event is deleted.
For standard functions see page 17
.
Organiser 63
Calendar settings
Press (
Options
) and select
Settings .
Default repeat
Set the default repeat time frame for newly created events.
Default alarm mode
Set the default alarm time span for newly created events.
To set the ringtone see page 76.
Day start time
Set the start time displayed on the first line in the daily/weekly view.
Week start day
Set the start day displayed in the weekly/monthly view.
New event/Edit event
Events are displayed in all calendar views. Overlapping events are displayed in parallel as different vertical bars.
Press ( Options ) and select New event
/
Edit event
.
If you edit a repeating event, select whether you want to save changes to the highlighted event or to all occurrences and confirm with .
Subject:
Enter a description of an event (max. one line).
Start date: / Start time:
Enter the date/time when the event starts.
64 Organiser
End date:
/
End time:
Enter the date/time when the event ends.
Alarm:
/
Repeat:
You can change the alarm/repeat for the current event.
Press ( Display ) and select Save to save the event.
If the time format
12-hour
is activated
/ to switch between am
/ pm
for the start and end time.
Information on the alarm
An audio and a visual alarm occur when the set date and time of the event are reached.
Reset alarm
Press (
Snooze
): reset the alarm for
10 minutes.
End alarm
Press ( Off ) : disable the alarm.
Launch calendar
Press : launch the calendar and display the event.
An alarm sounds even when the phone is switched off (unless the phone is switched off in alarms-off mode,
Dictat. machine
Organiser
>
Dictat. machine
Use this function to record short memos.
New recording
1. Select Record new .
2. Select save location: phone memory/card.
3. Press or start recording.
(
Record
):
5. Press ): end recording.
The recording is saved in the Sounds folder in
My Stuff
An incoming call ends recording. The recording is automatically saved.
Playback
1. Select a recording.
3. Press : ) : stop playback.
4. To adjust the volume press .
Set as call ringtone
1. Select a recording.
2. Press ( Options ) and select Set as call melody
.
Time zones
Organiser
>
Time zones
The world clock shows the current system time, the time zone (vertical coloured bar on the map), the time zone name and the time in the selected city.
The time zone display can be changed:
1. Press : select the time zone on the world map.
2. Press time zone.
: select a city in the selected
3.
: set the time zone for the selected city and confirm your change.
Time zone options
Press (
Options
).
Set time zone
Set the time zone for the selected city.
Auto time
Enable/disable automatic updating for the time and time zone.
Search city
Open the city list and select a city.
If you changed the time zone:
• The alarm clock is not affected.
• Calendar events are updated to the current time zone.
Organiser 65
Synchronisation
Organiser
>
Synchronisation
You can use this function remotely to access externally filed data (addresses, calendar) and synchronise this with the data on your phone. The data can, for example, be saved on a company computer.
If you receive an update request via WAP
push (page 47), you must confirm the up-
date to initiate it.
Remote sync
You can configure up to five profiles for remote synchronisation. Before you start the synchronisation, check Active profile , Sync mode and
Apps to synchronise
(see below).
Initiate synchronisation. The computer is selected and synchronisation started.
The actions which have been performed are displayed when completed.
If you accept/establish a call during synchronisation, the synchronisation operation may stop depending on your network.
66 Organiser
Active profile
Select the profile you want to use for synchronisation and press .
Edit profile
Press ( Options ) and select Edit .
Provider: Select a service provider.
Proxy:
URL: Enter the URL that points to the SyncML server, for example:
//path.to/syncmlserver
Port:
Enter the port number to connect with the SyncML server (1 to 65535).
Username:
Enter your login name.
Password:
Enter your password.
Cont.database:
Enter the path to the contact database on the synchronisation server.
Cal. database:
Enter the path to the calendar database on the synchronisation server.
HTTP authent.:
Enable/disable HTTP authentication.
HTTP usrname:
Enter your user name when
HTTP authent.:
is active.
HTTP passwd:
Enter your password when
HTTP authent.:
is active.
Restore defaults
Press ( Options ) and select Restore defaults
.
Sync mode
Data to sync:
Select whether All data or only
Modified data
is to be transferred during synchronisation.
Sync direction:
Select the direction in which synchronisation is to occur.
Two-way : data is transferred in both directions between the phone and the server.
Mob.overwrite
: phone transfers data to the server.
Serv.overwrite
: server transfers data to the phone.
Apps to synchronise
1. Press to check/uncheck the data type for synchronisation:
Contacts
,
Calendar .
2. Press ( Done ) to confirm.
Sync log
Display a summary of the latest synchronisation. The log indicates whether the synchronisation attempt was successful, for example, date, time and details about the synchronised application.
Extras
Extras
SIM toolkit (optional)
(Network-support-dependent)
Extras > SIM toolkit
Your service provider may offer special applications, such as, mobile banking, share prices, etc. via the SIM card.
For further information, please contact your service provider.
My menu
Extras > My menu
Create your own menu with frequently used functions, phone numbers from the contact list or applications.
Using My menu
Select an entry and press activate the function.
Or
to
If the selected entry is a phone number, press to call it.
Change My menu
You can replace each entry with another entry from the selection list.
Extras 67
1. Select an entry.
2. Press
Change
) to open the function list.
3. Select a function to be assigned to the entry and press or
( Select ) to save the entry.
If
None
is selected, the assignment is cleared from the list.
The Contacts list opens if
Assign speed dial is selected. Select a contact’s phone number.
Alarm clock
Extras
>
Alarm clock
The alarm clock can be separately set for each day of the week.
Set alarm
1. Select a day of the week and press
.
2. Enter time.
3. Press Save ) to activate alarm.
If the time format
12-hour
is activated
between am
/ pm
.
/ to switch
is displayed in standby mode when the alarm is turned on.
Apply alarm to every day
Apply the highlighted alarm time to every day of the week.
68 Extras
Press ) and select
Apply to every day .
End alarm
The alarm will ring at the set time, even when the ringtone or the phone is switched off (unless the phone is switched off in alarms-off mode,
If the phone is switched on by the alarm, it won’t switch off again if you end the alarm.
Reset alarm
Press ): stop the alarm tone and reset it for ten minutes.
The original time of the alarm is not changed.
End alarm
Press end the alarm.
The alarm remains active and will occur at the same time in one week.
Calculator
Extras
>
Calculator
The calculator can be used in basic and advanced mode.
• Number keys: enter digit(s).
•
/
: navigate to functions.
• : select a function.
The result is immediately calculated and displayed.
Press (
Options
) to set:
.
%
±
Basic mode
+, -, *, / Basic calculator types
=
1/x
Result
Reversion
Convert to percentage
Decimal point
Sign change "+"/ "–"
Advanced mode x
2 x Square root
Square e Exponent
MS
MR
M+
Save displayed number
Call up saved number
Add current number to saved number
Unit converter
Extras
>
Unit converter
You can convert various amounts into other units.
Converting the units/currency
1. Press to select the desired measure type: length, temperature, currency, etc.
2. Press field.
to switch to the input
3. Enter the quantity to be converted.
4. Press field.
5. Press currency.
to switch to the selection
to select the source unit/
6. Press to select the target unit/ currency. The result is displayed below.
Currency settings
When you call up the function, you must enter both source and target currencies as well as their exchange rate.
1. Enter the source currency (for example, euro) in the input field.
2. Press (
Options
) and select Save .
3. Scroll to the target currency field.
4. Press ( Options ) and select Add currency
.
5. Enter the target currency and exchange rate.
6. Press ( Options ) and select
Save
.
Sound recorder
Extras
>
Sound recorder
Same function as Organiser
>
Dictat. machine
Stopwatch
Media player
Extras
>
Stopwatch
Use the stopwatch to measure time or to save intermediate times.
• Press (
Lap
): save lap time . A lap is counted as the time between subsequent key presses.
• Press (
Reset
): reset the time to zero.
Media player
Media player
69
Or
Press in standby mode.
The media player functions are accessible via four tabs:
Music
,
Pictures
,
Videos and Bookmarks .
Press : select a tab.
The media player contains files stored in the phone memory as well as on the micro SD card.
Music
The music tab includes MP3 and
AAC files. The tracks are sorted by the following categories for fast access:
•
Playlists
: display configured/new playlists.
70 Media player
•
Recent
: display the 20 most recently played tracks.
• All : display all saved tracks sorted by track name.
Playback
Select the desired track/playlist and confirm with .
The playback is started. At the end of the track, the next track in the list/playlist is automatically played.
The media player offers the following functions during music playback:
Playback/pause.
Press: skip to the previous/next track.
Press and hold: rewind/fast forward within the current track.
Set the volume.
• Once playback starts, press send music to the background.
to
• You can perform other functions as usual while the phone plays music in the background. Press again to return to the Media player screen.
Create new playlist
1. Select Playlists .
2. Select <New playlist> .
3. Enter the playlist name.
4. Press ( Options ) and select
Save
.
You can add/remove files and change the order within the playlist via the op-
tions menu (see Media player options).
Pictures
All files are listed with file name and size.
Display picture
Select the desired picture and press
to display it.
The following functions can be applied to a displayed picture:
Switch to full screen mode.
Skip to previous/next picture.
Videos
Select the desired video and press to start playback.
The media player offers the following functions for video playback:
Playback/pause.
Press and hold: rewind/fast forward.
Switch to full screen mode and normal view.
Set the volume.
Bookmarks
Play music/video directly from bookmarks.
The Bookmarks tab shows a list of all streaming content links. Each URL must correspond to a single online audio/video file. These bookmarks are not listed as browser bookmarks.
Select the desired bookmark and press to start playback of music/video directly from the bookmark (live stream).
• You cannot pause an audio/video live stream.
• Incoming calls, alarms and events stop streaming.
Media player options
Press (
Options
).
Music file selected
Add to playlist
Open a list of all tracks.
Select the track(s) you want to add, then press
(
Options
) and select
Done
. Select a new/existing playlist. The selected tracks are added.
Playlist selected
Edit playlist
Select
Remove tracks
/
Change order to remove tracks from the playlist or to change the order within the playlist.
Media player 71
Picture viewing
Zoom in
/
Zoom out
Zoom picture.
Press / to navigate within the picture in zoom mode.
Fit to screen
If a picture is zoomed, return to original sizing.
Slideshow
Start automatic flow through pictures of current folder. Jump to next/previous picture manually with the navigation key. Slide show ends when all pictures in the folder are viewed.
End manually with / .
Bookmark selected
Settings
Select a connection profile.
Further functions
Play / Pause Playback/pause current file.
Full screen
Enter full screen mode.
History
Access a history comprising the last ten files opened regardless of their type and their storage location. Streaming data is also included.
72 My stuff
New picture /
New video
Start a camera in picture/video mode to take another picture/ record
New sound
Start the sound recorder
Set as bookmark
Add to bookmarks list
(for streaming content only).
For standard functions see page 17.
My stuff
My stuff
You can use My stuff to organise your files in folders.
If the micro SD card is inserted, folders/files stored on it are organised on a separate tab. Files are managed the same way as files saved on the phone.
Select a tab (phone memory/ micro SD card). The list of folders/files is displayed.
Select a folder/file or link and confirm it with .
Depending on your selection, the file and relevant application are opened or download is started.
Remember that pictures, sounds or applications may be protected
Folder structure
Files are organised in folders. Predefined folders have already been created for different data types and cannot be changed.
The content of the fixed folders is filtered. The folders contain special media types. Files that do not fit in another folder are listed in
Misc.
You can add personal folders on the top level as well as subfolders. Personal folders are displayed behind the default folders.
Personal folders on the top level can contain mixed media types. You can delete personal folders.
Within fixed folders you can add personal subfolders which are restricted to the media type of the fixed folder.
Folder Content Formats
(example)
Sounds
MP3 tracks, ringtones, recordings.
mp3, aac+ m3u, mid, amr, wav
Pictures
Pictures.
bmp, jpg, jpeg, png, gif
Videos
Videos.
3gp, H263,
MPEG4
Themes
Load theme
(packed).
Theme configuration (unpacked).
Select theme to activate it.
Appl.
Launch Java Application Manager and display list of saved applications.
*
*
My stuff
Games
Launch Java Application Manager and display list of saved games.
Misc.
Files of media types that are not included in other folders, for example, text modules,
Internet pages.
An error message is displayed if you try to open a file of unknown type.
jar, jad e.g. html, wml
The structure, content and functionality may differ depending on your provider.
73
74 My stuff
Options for organising folders
Press ( Options ).
View
/
Play
Start Media player and view/play a selected file.
New folder Create a new folder on the current level.
Search Enter the file name/ keyword to search files. A list of results is displayed.
Move
/
Copy
Move/copy highlighted file(s) from the source folder.
Paste Paste highlighted file(s) to the destination folder.
Note that DRM-protected items cannot be transferred to the micro SD card.
Assign to contact
Assign a media file as ringtone/picture/video to a contact.
License manager
Start the Licence manager (see below).
For standard functions see page 17
.
License manager
Display an alphabetical list of all rights associated with files stored on the phone or the micro SD card.
If the selected file has no license: manager anyway.
2. Select license.
Press ( Options ).
View license Display license details.
Renew license Open a browser and enter the license server’s
URL. Purchase new rights.
License search Enter rights name to search for license.
Go to content
Downld content
/ Go to the associated content file for the specified license in the relevant folder.
If chosen content is not found on the phone or the micro SD card , you have to download content first. Load the URL of the content server.
Delete license
Remove license from phone. Confirm notification.
Using the phone as a card reader
Only available with the micro SD card inserted.
You can use your phone as a card reader to transfer files between the computer and the micro SD card.
1. Connect the phone to a computer via the USB cable.
2. When asked to activate a mass storage device , press or
(
Yes
) to establish a connection.
3. On the computer, double-click the
My Computer icon to open the
My Computer panel where a removable disk icon representing the storage capacity of the micro SD card is displayed.
You can now use the phone as a card reader by copying/pasting/deleting files between the computer and the micro SD card.
When copying a file from your computer to the micro SD card, you must place the file in the folder intended for the type of file.
For example, an MP3 file must be placed in the MP3 folder in order to be successfully used in the phone.
Using the phone as a card reader
Settings
Settings
Profiles
Settings > Profiles
75
Or press in standby mode
(default shortcut).
Several settings can be stored in a phone profile, for example, to adapt the phone to the surrounding level of noise.
• Six standard profiles are provided with default settings:
General
,
Silent,
Meeting
,
Outdoor
,
Car kit
,
Headset
.
You can edit the default settings.
• You can set and rename two personal profiles (
User profile 1 and
User profile 2
).
Bluetooth car kits do not support profiles, such as, General, Silent, Meeting,
Outdoor, Car kit, Headset.
Activating a profile
1. Select a default profile or a personal profile.
2. Press to activate the profile.
Profile settings
Edit a default profile or create a new personal profile:
76
Settings
Settings
1. Select a profile.
2. Press (
Options
) and select
Change settings .
The list of available settings is displayed.
For details see the corresponding menu descriptions.
Profile options
Press ( Options ).
Activate
Activate the selected profile.
Change settings
Return to default
Copy from
Change profile settings.
Set profile settings to default.
Copy settings from another profile.
Headset
The special profile Headset is automatically set when an original headset is attached.
Ringtones
> Ringtones
Volume
Set the tones on the phone to suit your requirements. The volume setting controls the volume of the ringtone as well as the general volume level of beeps and tones played by different applications.
The volume setting does not affect the media player.
Voice calls/Video calls/
Calendar/Alarm clock
Select a function and set the melody and tone for each function separately.
Melody
Select a sound file for use as a ringtone.
1. Press ( Change ) and select melody from the My stuff
folder (
).
2. Confirm with (
Change
).
Tone
The following options will be offered depending on the selected function:
On/Off
Beep
Activate/deactivate the melody specified above.
You cannot turn off the alarm clock tone.
Set the ringtone to beep.
Messages
Melody
Select a sound file for use as a message alert tone.
SMS & MMS tone/CBS alert tone/
E-mail tone
Set the alert tone used for the different types of messages.
Game sounds/ Startup sound/
Shutdown sound
Activate/deactivate a predefined sound effect for the selected function.
Themes
Settings
>
Themes
Download a completely new user interface onto your phone. Press a key to reorganise various functions based on a theme, for example,
• switch melody on/off
• opening/closing melody
• additional animations
In addition to the automatic exchange of theme parameters (for example, switch melody on/off), you will have to manually set parameters, such as, Logo and Screensaver.
• When you select a theme all the components of the theme apply to the phone, for example, ringtones and wallpaper.
The existing settings might be overwritten.
• Subfolders within the theme folder are not supported. The theme might not be recognised.
Settings
Display
Settings
>
Display
77
Set Wallpaper/Logo
You can set pictures separately for following functions:
Wallpaper
Background image used on the display in standby mode.
Logo
Graphic to be displayed instead of the provider logo.
To set the wallpaper/logo:
Press ( Change ) and select a file from the corresponding folder in My stuff
(
), then confirm with
(
Select
).
Screensaver
The screensaver is displayed when a specified time period has elapsed. The function is ended by an incoming call or by pressing a random key.
Style:
Select a style or deactivate the screensaver.
Timeout:
Select the standby time before the screensaver is shown.
78 Settings
Auto key lock
Activate/deactivate this function to automatically lock the keys when the screensaver is active.
Press (
Options
) and select (
Save
) to save the screensaver.
Warning!
The talk/standby time is dramatically reduced when the screensaver is manually set.
Greeting msg
Set a message to be displayed when the phone is switched on.
Backlight time
Set the backlight duration for the display.
Brightness
Press / to set the brightness level for the display.
Decreasing the brightness of the display extends the operating time of your phone.
Power save
Activate/deactivate power save mode.
The standby time before the display goes into power save mode is fixed.
Vibration
Settings
>
Vibration
You can activate the silent alert function to avoid the disturbance caused by a ringing phone. The silent alert can also be activated in addition to the ringtone
(for example, in noisy environments).
Connectivity
Settings
>
Connectivity
Bluetooth
®
Bluetooth is a short-range radio connection by means of which a headset or car kit can be connected without the need for wires.
You can also use this route to send data using the Send function in the Options menu for the relevant application.
Each Bluetooth device has its own specific address and can be given an optional self-explanatory name. Password protection ensures the security of a
Bluetooth connection, as does including the BT partner in a list of "confidential" devices.
You must activate the Bluetooth function to establish a Bluetooth connection between your phone and other
Bluetooth devices.
The Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by BenQ Corp. is under license. Other trademarks and trade names used are the property of their respective owners.
Bluetooth active
Activate/deactivate Bluetooth.
When activated, Bluetooth reduces the phone’s standby time.
is displayed when Bluetooth is activated.
File location
Select where the files are to be stored after being transferred via Bluetooth.
Search
Search for specific categories of devices or for all Bluetooth devices.
Devices found are displayed in a list
(for list options see below).
Headsets, car kit and audio or video devices are listed if
Audio
is selected.
Known devices
Display the list of known devices
(max. ten devices).
Last connected
Display the list of last ten devices connected, including those that are currently connected.
Bluetooth name
Display device address. Enter the device name that is shown to other BT devices when they request it (see Bluetooth visibility).
Settings 79
If no name is entered, the device address is shown to other BT users (the device address cannot be changed).
Bluetooth visibility
The device address/name may or may not be shown to other BT devices if they request it in order to receive or send data.
On
/
Off
Activate/deactivate visibility.
Auto Set visibility for five minutes, then visibility is automatically disabled.
Bluetooth device options
Different functions will be offered depending on the current list
( Known devices or Last connected ).
1. Press to select a device from list.
2. Press ( Options ).
Trust/
Do not trust
Connect /
Disconnect
Enter the password to trust the device or remove the trust option for the device.
Trusted devices are automatically added to the known list and do not require the password to connect.
Establish/end a Bluetooth connection to a known audio device.
Only one audio device may be connected at a time.
80 Settings
View details
Add to known list
New search
Display the device details:
Name:
,
Device type:
and
Address:
.
Add the device to the known list.
Start a new search.
Data counter
Display the data transfer information.
Connect.profiles
(Network-support-dependent)
Up to 25 profiles containing a collection of settings utilised by applications may be preset depending on your provider.
The following information is displayed and may be edited:
Profile name:
Default/changed name.
APN:
Login:
Access point name (URL).
Your login name.
Password: Your password.
Authentication:
Select authentication mode.
DNS 1 (opt):
,
DNS 2 (opt):
The IP addresses of the primary/secondary DNS server used. DNS servers are used on the Internet to translate
IP addresses into domain names and vice versa.
Your provider will supply you with your login and password.
Internet profiles
(Network-support-dependent)
Up to 25 profiles containing a collection of settings utilised by applications are preset depending on your provider.
The following information is displayed and may be edited:
Profile name:
Default/changed name.
Type:
Select profile type:
HTTP
/
WAP .
Security: Select security mode.
Proxy server:
IP address or domain of the server used for Internet access.
Proxy port:
Communication port of the server (1 to 65535).
The setting is usually 80 or
8080 for HTTP and 9201 for
WAP.
Login:
Your login name.
Password:
Your password.
Your provider will supply you with your login and password.
Linger time
(Network-support-dependent)
You may be able to specify the linger time that applies to all applications depending on your provider.
Shortcuts
Settings
>
Shortcuts
You can assign one important number/function to each softkey, the navigation key (up, down, left, right) and the number keys 2 to 9. These keys can then be used as shortcuts to start functions/dial numbers (speed-dial numbers).
Setting a function shortcut
1. Select the desired key and confirm with .
2. Select the shortcut function and confirm with .
Setting a speed-dial key
To assign a number to a key select the
Assign speed dial and then select the desired contact.
is predefined as the speed dial key for the voicemail number. You cannot change its function.
If no function is assigned, you can set a function by
• pressing and holding the number key in standby mode and confirming your request.
• pressing the softkey and navigation key briefly.
Settings 81
Start function/call number using shortcuts
• Press the corresponding softkey and navigation key briefly to start the function.
• Press and hold a corresponding number key to start the function/dial number.
The service provider may have already assigned functions to a softkey (for example, access to "SIM services" or direct callup of the Internet portal). It may not be possible to modify this key assignment.
The left softkey may sometimes be replaced automatically by
View
to access a new message, for example.
Call setup
Settings
>
Call setup
Hide ID
(Network-support-dependent)
When you make a call, your number can be shown or suppressed on the called party’s display.
Default Set to default.
On / Off Activate/deactivate number display for all subsequent calls.
Next call only
Activate/deactivate number display for the next call only.
82 Settings
The setting applies to voice and video calls.
Call waiting
(Network-support-dependent)
You can activate call waiting if you registered for this service.
You will hear the call waiting tone during an ongoing call when there is another call waiting.
Diverts
(Network-support-dependent)
You can specify the conditions under which call types should be diverted to your mailbox or other numbers.
Divert video calls/voice calls
1. Select a call type.
2. Select Set .
3. Enter the number to divert to.
Or press (
Options
) and select
Contact to choose a contact’s number.
Divert other call types:
All calls/Data/Fax/Messages
1. Select
Set
.
2. Enter the number to divert to.
Or press ( Options ) and select
Contact
to choose a contact’s number.
Note that the divert is stored on the network and not on the phone (for example, when the SIM card is changed).
All calls
All calls are diverted ( when activated).
is displayed
Unanswered
A call is diverted in the following situations: Not reachable , No reply , Busy .
Not reachable
A call is diverted if the phone is switched off or is out of range.
No reply
A call is only diverted after a delay that is determined by the network.
Busy
A call is diverted if another call is in progress.
Fax
Fax calls are diverted to a number with a fax connection.
Data/Messages
Data calls are diverted to a number with a PC connection.
Any key answer
Incoming calls can be accepted by pressing a random key (except for ).
Auto redial
If a call you make is not answered, the phone will automatically redial that call.
Video calls
Specify the additional settings for video calls.
Show my image
If the function is activated, your video image is always transmitted to the caller during a video call.
If the function is deactivated, you can choose whether or not to send the video image when you receive an incoming video call.
Select image
If you do not want to transmit your video image to the caller ( Show my image is deactivated), you can select a video mute picture that is shown instead.
1. Press ( Change ) to change the setting.
2. Select a picture from the
My stuff
folder and confirm with (
Select
).
Display call timer
Display the call timer during a voice/video call.
Phone
Settings > Phone .
Language
Set the language of the display text.
Display language
Show the display language currently set.
When Automatic is set, the language of your home service provider is used.
Settings 83
Input language
Select a language for text entry. Languages with T9-support are marked with the T9 symbol. When Automatic is set, the input language is based on the display language.
If a language that you do not understand happens to be set, the phone can be reset to the language of your home service provider with the following input
(in standby mode): * # 0 0 0 0 #
T9 mode
Set T9 (intelligent text entry) or multitap (ABC) as the default text entry method for most of the text-entry items.
Key tones
Set the tone that is played when pressing keys.
Info tones
Activate/deactivate the service and alarm tones.
File system
Format card
Format the micro SD card and delete all saved data.
Eject card
Select this function before removing the card to protect your files stored on the micro SD card from accidental deletion.
When activated, the micro SD card will not be detected even if it is already inserted in the phone.
84 Settings
Memory assistant
Works the same way as My stuff
(page 72) and lists all saved folders and
files in the phone memory and on the micro SD card.
Phone identity
Switch between tabs to display the phone identity number (IMEI), the software configuration or start a device check.
The IMEI number may be useful for customer service.
Device check
A self-test as well as individual tests are offered. All individual tests are carried out if you select
Self test
.
To activate the Phone identity feature in standby mode, press * # 0 6 # .
Device manager (DM)
You can use the device manager to start and control software updates. You can also set server profiles for the update.
Sessions can be initiated in different ways.
• Manual session: you start the DM session via this menu option.
• Software update: the phone checks the software status each time it is switched on. If an update is available a request is displayed. Confirm the requests to start the software update and to re-boot your phone.
If you want to start a session the battery must be charged at least 50%.
The phone default settings vary from service provider to service provider.
Master reset
Reset the phone to the default values
(factory setting). This does not affect the
SIM card or the network settings.
To reset the phone in standby mode press * # 9 9 9 9 # .
Clock
Settings
>
Clock
Time/Date
Enter the time (hours/minutes) or date
(day/month/year) and confirm with .
The network time is displayed if Auto time
If the 12-hour time format is activated in
Time format , press switch between am/pm.
/ to
Time zone
The same function as
Organiser
> Time zones
Time format
Set the 24-hour/12-hour format for time used in various applications.
Date format
Set the display format for date.
Show clock
Set the time and date display in standby mode.
Auto time
If you activate auto time, the time zone is switched automatically to local time by the network.
Security
Settings > Security
Auto key lock
If activated, the keypad is automatically locked if no key has been pressed for one minute in standby mode. This prevents the inadvertent phone usage. However, you can still be called and you can still make an emergency call.
The keypad can be directly locked and unlocked in standby mode by pressing
.
Only protect. SIM
(PIN2 or phone code protected)
Dialling options are restricted to the
SIM-protected numbers in the contacts.
Settings 85
PIN codes
This SIM only
(PIN2 or phone code protected)
The phone can be linked to a SIM card when the phone code is entered. The phone will not operate with a different
SIM card unless the phone code is known.
If the phone is to be used with a different
SIM card, enter the phone code when prompted.
Barrings
(Network-support-dependent)
Barring restricts the use of your
SIM card (not supported by all service providers). You need a four-digit network password for network barring.
Your service provider will supply you with this password. You may need to register separately for each barring.
All outgoing
All outgoing calls except emergency numbers are barred.
Outg. internat.
(International outgoing)
Only national calls can be made.
86 Settings
Outg. int. x home
(International outgoing without home country)
International calls are not permitted.
However you can make calls to your home country when abroad.
All incoming
The phone is barred for all incoming calls.
When roaming
You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.
Status check
Check the status of selected or all call type(s).
Clear all
All barrings are deleted.
License manager
Start the License manager to view/edit license information of all saved files.
Downld prompt
Enable or disable a content download notification.
Network
Settings
>
Network
Network info
Retrieve information about the network operator currently set.
Choose network
Start a network search. This is useful if you are not in your home network or want to register in a different network.
The list of networks currently available is displayed.
Auto network
If you activate this function, the phone automatically searches for the network available. Otherwise you can select a different network manually from the network list.
Preferred network
Display a list of preferred networks.
Customise the list by changing entries.
Mode selection
(Network-support-dependent)
Select the preferred network mode.
Fast search
Activating this function speeds up network reconnection (standby time is reduced).
Data con. auto attach
If this feature is activated, the phone will register for the designated GPRS/UMTS packet service network when it is turned on.
If deactivated, the phone will register for the designated GPRS/UMTS packet service network only when you start the browser.
Accessories
Settings
>
Accessories
Car kit
The Car kit profile is automatically activated as soon as the phone is connected to the car kit.
Edit profile
To edit the Car kit
profile, see Profiles, page 75.
Auto answer
Voice and video calls are automatically accepted after a few seconds.
Key assignments
(for Car kit only)
You can assign new functions to keys on the car kit.
Headset
If an original headset is used, the
Headset profile is automatically activated when the headset is plugged in.
Settings 87
Edit profile
To edit the Headset
profile, see Profiles, page 75.
Auto answer
Voice and video calls are automatically accepted after a few seconds.
Charge via USB
The phone is charged via USB when connected to a computer via USB cable.
Mass storage
See Using the phone as card reader ,
88 Mobile Phone Manager
Mobile Phone Manager
MPM (Mobile Phone Manager) enables you to use extended phone functions from your PC. The phone and PC communicate via a data cable or Bluetooth.
MPM offers you a wide range of functions.
If you wish, the software can automatically take over such routine tasks as synchronising your contacts, downloading the latest photos you have taken, or updating your music files.
MPM makes managing your music and sound files, ring tones and videos effortless. With a mouse click you can transfer the entire contents of a music CD to your phone in the form of space-saving
AAC or MP3 files, maintaining first-class quality.
With MPM you can easily and conveniently edit your photos, pictures and wallpaper logos and add a wide variety of effects.
Mobile Modem Assistant enables you to use your phone conveniently and easily as a modem both at home and when travelling.
With Phone Explorer you can access the files in your phone as if it was simply another folder in your PC.
MPM, a detailed user guide and online help are contained on the CD enclosed with this phone.
Questions & Answers 89
Questions & Answers
Consult the information in the chart below if you encounter problems while using the phone or if it performs erratically. If your particular problem cannot be resolved using the information in the chart, contact the dealer where you purchased the phone.
Problem
Poor reception
Echo or noise
Battery will not charge.
Possible causes Possible solution
The network signal is too weak at your current location, for example, in a basement or near a tall building, because wireless transmissions cannot effectively reach it.
Move to a location where the network signal can be properly received.
Avoid using the phone at such times or try again after waiting a short time.
The network is busy at the current time (for example, during peak times, there may be too much network traffic to handle additional calls).
You are too far away from a base station for your service provider.
You can request a service area map from your service provider.
Poor network trunk quality on the part of your service provider.
Poor local telephone line quality.
Press the End key and dial again. You may be switched to a better-quality network trunk or phone line.
Press the End key and dial again. You may be switched to a better-quality network trunk or phone line.
The battery or battery charger is damaged.
Contact the dealer.
The phone's temperature is below 0°C (+32°F) or higher than
+50°C (+122°F).
Poor contact between the battery and charger.
Adjust the battery charging environment to avoid extremes of temperature.
Check all connectors to make sure all connections have been properly made.
90 Questions & Answers
Problem Possible causes Possible solution
Reduced standby time
You cannot switch your phone on.
SIM card error
The standby time is related to your service provider system configuration. The same phone used with different service provider systems will not provide exactly the same length of standby time.
If you are located in an area where signalling is weak, switch the phone temporarily off.
The battery is depleted. Battery life will be reduced in high-temperature environments.
Use a new battery.
The phone continues to send out signals if you are not able to connect to the network as it attempts to locate a base station.
Doing so consumes battery power and will consequently reduce the standby time.
Change your location to one where the network is accessible or turn your phone temporarily off.
Recharge the phone's battery.
Battery power has been depleted.
SIM card malfunction or damage.
Take the SIM card to your service provider for testing.
SIM card inserted improperly.
Insert the SIM card properly.
Debris on the SIM card contacts.
Use a soft, dry cloth to clean the SIM card contacts.
Unable to connect to the network.
SIM card invalid.
You are not within the network's service area.
Poor signal.
You cannot answer incoming calls.
Contact your service provider.
Check the service area with your service provider.
Move to an open space or if you are inside a building, move closer to a window.
You have activated the Call Barring feature.
Go to Settings > Security > Barrings and then select Clear All .
Questions & Answers 91
Problem Possible causes Possible solution
You cannot make outgoing calls.
You have activated call barrings. Go to Settings > Security > Barrings and then select Clear All .
Charge limit reached.
PIN code is blocked. You have entered an incorrect
PIN code three times in a row.
Reset limit with PIN2.
Contact your service provider. If the service provider provides the SIM card's PUK code, use the
PUK code to unlock the SIM card.
Unable to add contacts to the phone.
Unable to select certain features.
Memory for contacts is already full.
Your service provider does not support these features or you have not applied for services that provide these features.
Delete unnecessary contact information from the phone.
Contact your service provider.
92 Customer Care
Customer Care
We offer fast, individual advice! You have several options:
Our online support on the Internet: www.BenQMobile.com/customercare
We can be reached any time, any place.
You are given 24 hour support on all aspects of our products. Here you will find an interactive fault-finding system, a compilation of the most frequently asked questions and answers, plus user guides and current software updates to download.
You will also find the most frequently asked questions and answers in the sec-
tion entitled "Questions & Answers" in this user guide on page 89.
You can also get personal advice about our range of products on our Premium
Hotline:
United Kingdom......................... 0906 9597500
(£ 0.75 per minute)
Qualified employees are waiting to offer you expert information about our products and installation.
In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.
If repair work is necessary, please contact one of our service centres:
Abu Dhabi .......................................... 0 26 42 38 00
Argentina........................................0 81 02 22 66 24
Australia ........................................... 13 00 55 76 68
Austria ................................................... 05 17 05 17
Bahrain ....................................................... 40 42 34
Bangladesh ......................................... 0 17 52 74 47
Belgium .............................................. 0 78 15 22 21
Bolivia................................................. 0 21 21 41 14
Bosnia Herzegovina........................... 0 33 27 66 49
Brunei .................................................... 02 43 08 01
Bulgaria ................................................. 02 73 94 88
Cambodia .............................................. 12 80 05 00
Canada............................................1 88 87 77 02 11
Chile.................................................... 8 00 53 06 62
China ................................................ 40 08 88 56 56
Colombia ......................................01 80 07 00 66 24
Croatia ................................................ 0 16 10 53 81
Czech Republic................................... 2 33 03 27 27
Denmark................................................ 35 25 65 29
Dubai .................................................. 0 43 96 64 33
Ecuador ............................................ 18 00 10 10 00
Egypt................................................... 0 23 33 41 11
Estonia................................................... 56 64 54 00
Finland ............................................. 09 22 94 37 00
France ............................................... 01 56 38 42 00
Germany.........................................0 18 05 33 32 26
Greece ............................................... 80 11 11 11 16
Hong Kong ............................................ 28 61 11 18
Hungary............................................ 06 14 71 24 44
Iceland ..................................................... 5 20 30 00
India...............................22 24 98 70 00 Extn: 70 40
Indonesia........................................0 21 46 82 60 81
Ireland .............................................. 18 50 77 72 77
Italy................................................... 02 45 27 90 36
Ivory Coast ............................................ 05 02 02 59
Jordan ................................................. 0 64 39 86 42
Kenya....................................................... 2 72 37 17
Kuwait ..................................................... 2 45 41 78
Latvia ....................................................... 7 50 11 18
Lebanon................................................. 01 44 30 43
Libya ................................................. 02 13 50 28 82
Lithuania ............................................ 8 70 07 07 00
Luxembourg..................................... 40 66 61 56 40
Macedonia.......................................... 0 23 13 18 48
Malaysia ..................................... + 6 03 77 12 43 04
Malta......................................... + 35 32 14 94 06 32
Mauritius................................................. 2 11 62 13
Mexico ..........................................01 80 07 11 00 03
Morocco ................................................ 22 66 92 09
Netherlands....................................0 90 03 33 31 00
New Zealand .................................... 08 00 27 43 63
Nigeria ................................................ 0 14 50 05 00
Norway .................................................. 22 57 77 46
Oman .......................................................... 79 10 12
Pakistan ............................................ 02 15 66 22 00
Paraguay............................................. 8 00 10 20 04
Peru..................................................... 0 80 05 24 00
Philippines ......................................... 0 27 57 11 18
Poland............................................... 08 01 30 00 30
Portugal .............................................. 8 08 20 15 21
Qatar ...................................................... 04 32 20 10
Romania ........................................... 02 12 09 99 66
Russia..............................................8 80 02 00 10 10
Saudi Arabia....................................... 0 22 26 00 43
Serbia ................................................ 01 13 07 00 80
Singapore............................................... 62 27 11 18
Slovak Republic................................ 02 59 68 22 66
Slovenia .............................................. 0 14 74 63 36
South Africa ..................................... 08 60 10 11 57
Spain ................................................... 9 02 11 50 61
Sweden.............................................. 08 57 92 90 49
Switzerland....................................... 08 48 84 08 45
Taiwan .............................................. 02 23 96 10 06
Thailand ............................................. 0 29 53 50 00
Tunisia................................................... 71 86 19 02
Turkey ............................................0 21 64 59 98 98
Ukraine...........................................8 80 05 01 00 00
United Arab Emirates........................ 0 43 66 03 86
United Kingdom ............................0 87 05 33 44 11
Uruguay............................................ 00 04 05 46 62
USA.................................................1 88 87 77 02 11
Venezuela .......................................0 80 01 00 56 66
Vietnam............................................ 84 89 20 24 64
Zimbabwe.............................................. 04 36 94 24
Customer Care 93
94 Care and maintenance
Care and maintenance
Your phone has been designed and manufactured to the highest of standards and should be treated with great care.
The suggestions below will help you to enjoy your phone for many years.
• Protect your phone from moisture and humidity. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Should your phone become wet, disconnect it immediately from the power supply to avoid electric shock. Do not place your phone (even to dry it) on/in a source of heat such as a microwave oven, oven or radiator. The phone may become overheated and possibly explode.
• Do not use or store the phone in dusty, dirty areas. Its moving parts may be damaged and the casing may become deformed and discoloured.
• Do not store your phone in hot environments (e.g. on a vehicle's dashboard in the summer). High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
• Do not store your phone in cold environments. When the phone warms up again
(to its normal ambient temperature), moisture can form inside the phone, which may damage electronic circuit boards.
• Do not drop, knock or shake your phone.
Rough handling can damage internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone.
The suggestions given above apply equally to your phone, battery, charger and all accessories. If any of these parts is not working properly, obtain fast and reliable help at our service centres.
Battery quality statement
The capacity of your mobile phone battery will reduce each time it is charged/emptied.
Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your mobile phone may be considerably reduced, even after a full recharge of the battery.
Regardless of this, the battery has been designed and manufactured so that it can be recharged and used for six months after the purchase of you mobile phone. After six months, if the battery is clearly suffering from loss of performance, we recommend that you replace it. Please buy only original batteries.
Display quality declaration
For technological reasons, a few small dots with different colours may appear in the display in exceptional cases.
Just remember that the appearance of brighter or darker dots generally does not mean that a fault has occurred.
Product data 95
Product data
Declaration of conformity
Hereby, BenQ Mobile, declares that this
EF81 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The relevant declaration of conformity (DoC) has been signed. Please call the company hotline if you require a copy of the original or visit: www.BenQMobile.com/conformity
This device complies with
Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. this device must not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This phone has been tested for body-worn operation and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of
1.5 cm from your body when the phone is switched on.
Lost phone
If you lose your phone or SIM card contact your service provider immediately to prevent misuse.
Disclaimer
BenQ Mobile GmbH & Co. OHG makes no warranty or representation, either expressed or implied, with respect to the quality, accuracy or fitness for any particular purpose of this document. The information in this document is correct at the time of printing and subject to change without notice.
Weight data
Phone weight: 89g.
Charger weight: 75g.
Battery weight: 19.2g.
96 SAR
SAR
European Union (R&TTE) and international (ICNIRP)
INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit for mobile devices is
2 W/kg and was adopted into the European
Standard EN 50360 and into other national standards. The CE mark demonstrates that the EU requirements are met.
The highest SAR value for this device when tested at the ear was 1.13 W/kg 1 . As mobile devices offer a range of functions, they can be used in positions other than the head, such as on the body. In this case, a separation distance of 1.5 cm is required.
As SAR is measured utilizing the device's highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you nevertheless want to reduce your exposure then you can do so by limiting the length of calls or using a 'hands-free' device to keep the mobile phone away from the head and body.
Additional Information can be found on the websites of the World Health Organization
( www.who.int/emf ) or BenQ Mobile
( www.BenQMobile.com
).
Maximum SAR measurement for
FCC requirements
Head: 0.477
W/kg (1g)
Body: 0.116
W/kg (1g)
1 The tests are carried out in accordance with international guidelines for testing.
License Agreement 97
License Agreement
This License Agreement ("Agreement") is between You and BenQ Mobile GmbH & Co.
OHG ("BenQ"). The Agreement authorizes
You to use the Licensed Software, specified in
Clause 1 below, which may be included in your phone, stored on a CD-ROM, sent to You by electronic mail or over the air, downloaded from BenQ Web pages or servers or from other sources under the terms and conditions set forth below.
Read this Agreement carefully before using your phone. By using your phone or installing, copying, and/or using the Licensed Software,
You acknowledge that You have read and understood the Agreement and agree to be bound by all of the terms and conditions stated below.
You further agree that if BenQ or any licensor of BenQ ("Licensor") is required to engage in any proceeding, legal or otherwise, to enforce their rights under this Agreement, BenQ and/or its Licensor shall be entitled to recover from You, in addition to any other sums due, reasonable attorney's fees, costs and disbursements. If You do not agree to all of the terms and conditions of this Agreement, do not install or use the Licensed Software. This Agreement governs any Updates, releases, revisions, or enhancements to the Licensed Software.
1.
LICENSED SOFTWARE. As used in this
Agreement, the term "Licensed Software" means collectively: all the software in Your phone, all of the contents of the disk(s), CD-
ROM(s), electronic mail and its file attachments, or other media with which this Agreement is provided and includes any related
BenQ or third party software and upgrades, modified versions, updates, additions and copies of the Licensed Software, if any, distributed over the air, downloaded from BenQ Web pages or servers or from other sources.
2.
COPYRIGHT. The Licensed Software and all related rights, without limitation including proprietary rights therein, are owned by BenQ, its Licensors or affiliates and are protected by international treaty provisions and all applicable national laws. This Agreement does not convey to You nor allow You to acquire any title or ownership interest in the Licensed Software or rights therein. The structure, organization, data and code of the Licensed
Software are the valuable trade secrets and confidential information of BenQ, its Licensors or affiliates. You must reproduce and include the copyright notices with any permitted copies You make of the Licensed Software.
3.
LICENCE AND USE. BenQ grants to You a non-exclusive, non-transferable end user right to install the Licensed Software or use the
Licensed Software installed on the phone. The
Licensed Software is licensed with the phone as a single integrated product and may be used with the phone only as set forth in these licensing terms.
4.
LIMITATIONS ON LICENCE. You may not copy, distribute, or make derivative works of the Licensed Software except as follows:
(a) You may make one copy of the Licensed
Software, excluding the documentation, as an archival backup copy of the original. Any other copies You make of the Licensed Software are in violation of this Agreement.
(b) You may not use, modify, or transfer the right to use the Licensed Software other than together with the accompanying hardware or copy the Licensed Software except as expressly provided in this Agreement.
(c) You may not sublicense, rent or lease the
Licensed Software.
(d) You may not reverse engineer, decompile, modify, or disassemble those Licensed
Software programs except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
98 License Agreement
Parts of the Licensed Software may be supplied by third parties and may be subject to separate licence terms. Such terms are set out within the documentation.
5.
MISUSE OF THE LICENSED SOFT-
WARE OR DATA GENERATED BY THE LI-
CENSED SOFTWARE IS STRICTLY
PROHIBITED BY BENQ, MAY VIOLATE
GERMAN, U.S. AND OTHER LAWS AND
MAY SUBJECT YOU TO SUBSTANTIAL LIA-
BILITY. You are solely responsible for any misuse of the Licensed Software under this
Agreement and for any liability or damage related in any way to your use of the Licensed
Software in violation of this Agreement. You are also responsible for using the Licensed
Software in accordance with the limitations of this Agreement.
6.
TERMINATION. This Agreement is effective from the first date You install, copy or otherwise use the Licensed Software. You may terminate this licence at any time by deleting or destroying the Licensed Software, all back up copies and all related materials provided to
You by BenQ. Your licence rights terminate automatically and immediately without notice if You fail to comply with any provision of this
Agreement. The rights and obligations under sections 2, 5, 6, 7, 9, 12 and 13 of this Agreement shall survive the termination of this
Agreement.
7.
YOU ACKNOWLEDGE THE LICENSED
SOFTWARE IS PROVIDED "AS IS" AND NEI-
THER BENQ NOR ANY OF ITS LICENSORS
MAKE ANY REPRESENTATIONS OR WAR-
RANTIES, EXPRESS OR IMPLIED, INCLUD-
ING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR
THAT THE LICENSED SOFTWARE WILL
NOT INFRINGE ANY THIRD PARTY PAT-
ENTS, COPYRIGHTS, TRADEMARKS OR
OTHER RIGHTS. THERE IS NO WARRANTY
BY BENQ OR ITS LICENSORS OR BY ANY
OTHER PARTY THAT THE FUNCTIONS
CONTAINED IN THE LICENSED SOFT-
WARE WILL MEET YOUR REQUIREMENTS
OR THAT THE OPERATION OF THE LI-
CENSED SOFTWARE WILL BE UNINTER-
RUPTED OR ERROR-FREE AND BENQ AND
ITS LICENSORS HEREBY DISCLAIM ANY
AND ALL LIABILITY ON ACCOUNT THERE-
OF. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY A BENQ REPRE-
SENTATIVE SHALL CREATE A WARRANTY
OR IN ANY WAY AFFECT THIS DISCLAIM-
ER. YOU ASSUME ALL RESPONSIBILITY TO
ACHIEVE YOUR INTENDED RESULTS AND
FOR THE INSTALLATION, USE, AND RE-
SULTS OBTAINED FROM IT.
8.
NO OTHER OBLIGATIONS. This Agreement creates no obligations on the part of
BenQ other than as specifically set forth herein.
9.
LIMITATION OF LIABILITY. IN NO
EVENT SHALL BENQ, ITS EMPLOYEES, LI-
CENSORS, AFFILIATES OR AGENTS BE LIA-
BLE FOR ANY DIRECT DAMAGES, LOST
PROFITS, DATA OR BUSINESS, OR COSTS
OF PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES, PROPERTY DAM-
AGE, INTERRUPTION OF BUSINESS OR FOR
ANY SPECIAL, INDIRECT, INCIDENTAL,
EXEMPLARY, ECONOMIC, PUNITIVE OR
CONSEQUENTIAL DAMAGES, HOWEVER
CAUSED, AND WHETHER ARISING UNDER
CONTRACT, TORT, NEGLIGENCE, OR OTH-
ER THEORY OF LIABILITY, OR ARISING
OUT OF THE USE OF OR INABILITY TO USE
THE LICENSED SOFTWARE, EVEN IF BENQ
IS ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE LIMITATION OF LIABILI-
TY SHALL NOT APPLY IF AND TO THE EX-
TENT BENQ´s LIABILITY IS MANDATORY
UNDER THE APPLICABLE LAW E.G. AC-
CORDING TO PRODUCT LIABILITY LAW
OR IN THE EVENT OF INTENTIONAL MIS-
CONDUCT, PERSONAL INJURY OR DEATH.
10. TECHNICAL SUPPORT. BenQ and its Licensors have no obligation to furnish You with technical support unless separately agreed in writing between You and BenQ or the applicable Licensor.
BenQ and where applicable its Licensors in the
Licensed Software shall be free to use any feedback received from You resulting from your access to and use of the Licensed Software for any purpose including (without limitation) the manufacture, marketing and maintenance or support of products and services.
11. EXPORT CONTROL. The Licensed Software may include technical data and cryptographic software and is subject to German,
European Union and U.S. export controls and may be subject to import or export controls in other countries. You agree to strictly comply with all applicable import and export laws and regulations. Specifically, You agree, to the extent required by U.S. Export Administration
Regulations, that You shall not disclose or otherwise export or re-export the Licensed Software or any part thereof delivered under this
Agreement to (a) Cuba, Iran, Iraq, Libya,
North Korea, Sudan, Syria or any other country (including a national or resident of such country) to which the U.S. has restricted or prohibited the export of goods or services.
12. APPLICABLE LAW AND FORUM. The laws of Germany govern this Agreement. No choice of law rules of any jurisdiction will apply. The courts in Munich shall settle any disputes arising out of or relating to this
Agreement provided you are a merchant.
13. MISCELLANEOUS. This Agreement represents the entire agreement between You and
BenQ relating to the Licensed Software and (i) supersedes all prior or contemporaneous oral or written communications, proposals, and representations with respect to its subject matter; and (ii) prevails over any conflicting or additional terms of any acknowledgement or similar communication between the parties during the term of this Licence. Notwithstand-
License Agreement 99 ing the foregoing, some products of BenQ may require You to agree to additional terms through an on-line "click-wrap" licence, and such terms shall supplement this Agreement.
If any provision of this Agreement is held invalid, all other provisions shall remain valid unless such validity would frustrate the purpose of this Agreement, and this Agreement shall be enforced to the full extent allowable under applicable law. No modification to this
Agreement is binding, unless in writing and signed by a duly authorised representative of each party. This Agreement shall be binding on and shall inure to the benefit of the heirs, successors, and assigns of the parties hereto.
The failure of either party to enforce any right resulting from the breach of any provision of this Agreement by the other party will not be deemed a waiver of any right related to a subsequent breach of such provision or any other right hereunder. Notwithstanding anything to the contrary in this Agreement, BenQ and/or its licensors may enforce its rights, including but not limited to copyright, trademark or trade names, in accordance with the rules of law in each country.
100 Menu tree
Menu tree
Contacts
Call records
Internet > BenQ-Siemens
Enter URL
Bookmarks
History
Settings
Camera
Messages
Organiser
> Picture mode
Video mode
> Multimedia
Look and feel
Security
Certificates
WAP push
Browser profiles
> SMS
MMS
> Create message
Inbox
Drafts
Outbox
Sent messages
Voicemail
Templates
Message settings
> Calendar
Dictat. machine
Time zones
Synchronisation
> Text
MMS
> SMS
MMS
Voicemail
Cell broadcast
Media player
Video call
Extras
> Google Search
Google Maps
> Services
My menu
Alarm clock
Calculator
Unit converter
Sound recorder
Stopwatch
My stuff
Settings > Profiles
Ringtones
Themes
Display
> Volume
Voice calls
Video calls
Messages
Calendar
Alarm clock
Game sounds
Startup sound
Shutdown sound
> Wallpaper
Logo
Screensaver
Greeting msg
Backlight time
Brightness
Power save
Menu tree 101
102
Settings
Menu tree
> Vibration
Connectivity
Shortcuts
Call setup
Phone
> Off
Standard
Helicopter
UFO
Shock
Mosquito
Train
> Bluetooth
Data counter
Connect.profiles
Internet profiles
Linger time
> Left softkey
Right softkey
Navigation keys
Number keys
> Hide ID
Call waiting
Diverts
Any key answer
Auto redial
Video calls
Display call timer
> Language
T9 mode
Key tones
Info tones
File system
Phone identity
Settings > Phone
Clock
Security
Network
Accessories
> Device manager
Master reset
> Time
Date
Time zone
Time format
Date format
Show clock
Auto time
> Auto key lock
Only protect. SIM
PIN codes
This SIM only
Barrings
License manager
Downld prompt
> Network info
Choose network
Auto network
Preferred network
Mode selection
Fast search
Data con. auto attach
> Car kit
Headset
Charge via USB
Mass storage
Menu tree 103
P/N: 4J.G5A01.001
Download
Advertisement