Camera. BENQ-SIEMENS E81
Advertisement
Advertisement
36 Camera
Cost information is not displayed if cost display is disabled or the currency is not entered.
Reset all incoming/outgoing calls lists
Press ) to reset the current list.
Charge settings
Select Settings .
Currency
(PIN2-protected)
1. Enter the currency code
(up to three characters).
2. Press ) and select Save .
Personal rate
(PIN2-protected)
1. Enter the per minute rate.
2. Press ).
To enter "." press .
Display costs
Activate/deactivate cost display.
Account limit info
(PIN2-protected)
The account limit is not supported by all SIM cards. An appropriate notification is displayed if your SIM card does not support the account limit.
• Account limit
Activate/deactivate the account limit.
• Enter maximum units
Enter the maximum units for the account.
• Reset remaining
Confirm notification to reset the account limit.
Camera
You can view photos/videos recorded with the integrated camera immediately:
• Use a picture as wallpaper.
• Send a picture/video via MMS, e-mail or Bluetooth.
• Save pictures/videos on the phone or on the micro SD card.
Start the camera
Picture mode
Press in standby mode and select
Camera
>
Picture mode
.
Or
Press the camera key the phone.
Video mode
Press
on the side of
in standby mode and select
Camera
>
Video mode
.
Or
Press ) (default shortcut).
The current preview image is displayed.
Displayed information
Current picture/video settings
The selected resolution is displayed in the top line.
The following symbols are displayed:
Current brightness setting.
Current zoom level.
Flash (when activated).
Night mode
(when activated).
Self timer (when activated).
Active self timer, flash and night mode are indicated only in picture mode.
Remaining memory
The following memory information is displayed:
• Memory location: pictures/videos can be saved either on the phone or on the micro SD card
To change the save location see
.
• Remaining memory: picture count/available record time on the current memory location. The remaining memory depends mainly on the selected resolution and the motif.
Camera
Taking pictures/videos
Settings prior to taking pictures/recording videos
37 brightness. Brightness can be set in seven levels (-3 to +3).
• Press levels.
: zoom in/out in seven
For further settings see options menu.
Taking pictures
1. Start the camera in picture mode.
2. Press or the camera key .
Recording videos
You can record up to five minutes.
1. Start the camera in video mode.
2. Press or the camera key start recording.
: or
( Pause / Resume ): control recording.
4. Press ( Stop ): end recording.
Reviewing pictures/videos
Start video playback
Press ( Options ) and select Play video
.
38 Camera
• Press or the volume key :
Control volume during playback.
• Press (
Stop
) : Stop playback.
Save pictures/videos
Press to confirm save notification.
The picture/video is displayed.
The picture/video is saved with a name, the date and the time in
Media player
/
My stuff > Pictures / Videos
Return to view finder
Press : open the view finder to take another picture/record another video.
Delete pictures/videos
Press ( Discard ): delete a picture/video and open the view finder.
Camera options
The following functions are available, depending on the current situation.
Press (
Options
).
New picture /
New video
Open the view finder to take another picture/record another video.
Play video
View pictures/
View videos
Play a recorded video.
Open the corresponding
Media player
tab to view
Picture mode /
Video mode
Message mode
Switch between picture and video mode.
Message mode is optimised for sending video via MMS/Bluetooth:
• record time ten seconds.
• Low resolution.
Message mode is activated automatically if video mode is started from an
MMS application.
Flash Turn the flash on/off for picture mode.
Audio record Turn the microphone on/off for video mode.
Night mode Turn night mode on/off for picture mode.
Self timer Picture is taken approx.
10 s after triggering. For the last three seconds, you will hear a signal tone each second.
Picture settings /
Video settings
Open settings (see below).
For standard functions see page 17.
Picture settings/Video settings
Resolution
A setting can be made for the quality of the picture/video regardless of the preview image resolution.
Download
Advertisement