Message lists. BENQ-SIEMENS E81
Publicitate
Publicitate
48 Message lists
Message lists
Messages are displayed the same as in the Inbox. The most recently edited/sent message is displayed at the top of the list.
Drafts
Messages
>
Drafts
The list is organised on two tabs:
SMS/MMS and E-mail .
You can save a message as a draft while creating it.
Outbox
Messages
>
Outbox
The list contains all messages you failed to send and is organised on two tabs:
SMS/MMS
and
.
Sent messages
Messages
>
Sent messages
The list contains all sent messages and is organised on two tabs: SMS/MMS and
.
Message settings
Configure SMS, MMS, e-mails, cell broadcast (CB) and voice mail.
SMS settings
Messages
SMS
>
Message settings
>
SMS profiles
The SMS parameters are configured in up to the different profiles. Profiles can be renamed, edited and set as the default.
The first five profiles are saved on the SIM card, the last five profiles are saved on the phone memory. The profiles saved on the phone are not changed when replacing the SIM card.
Setting the default profile
If a profile is already configured: Select profile and press as the default.
to set the profile
Edit profile
1. Select profile.
2. Press ( Options ) and select Edit .
Rename
Message centre
Rename SMS profile.
Enter number of message centre.
Recipient
Set a default recipient for the profile. Select
Add fr.
Contacts
and select contact/ distribution list, or enter a number. This recipient is automatically added to each SMS.
Validity period
If SMS could not be delivered during this period, it is automatically deleted from the message centre.
Status report
A status report is sent when a message is delivered successfully. If
Ask on send
is activated, a prompt is displayed when SMS is sent.
Send confirmation
Set whether or not a confirmation is displayed for messages successfully sent.
SMS access
Select
GSM
/
GPRS
mode for sending/receiving
SMS.
SMS memory
Select
Phone
/
SIM
as the default save location for incoming SMS.
SMS type
Select delivery type
( network-support-dependent).
Reset profile
Press (
Options
) and select
Reset profile .
A predefined profile cannot be reset if it was locked by your provider.
Message settings
Auto header
If the function is activated the Header
template (page 22) is automatically in-
serted at the start of any SMS created.
Auto signature
Auto delete SMS
If the function is activated, the oldest
SMS message in the Inbox is deleted when a new SMS message arrives.
Emoticons
49
If the function is activated, the Signature
template (page 22) is automatically
inserted at the end of any SMS created.
Save sent items
If the function is activated, all SMS messages sent are automatically saved in the
Sent folder.
Emoticons are little symbols (smilies) expressing your feelings. If this function is activated, emoticons are automatically displayed as little pictures.
Text size
You can set the displayed size of the text in the SMS Viewer.
50 Message settings
MMS settings
Messages
>
MMS
>
Message settings
MMS profiles
MMS parameters are configured in up to five different profiles. You will receive the necessary data from your service provider.
Setting the default profile
If a profile is already configured: select the profile and press default profile.
to set it as the
Edit profile
1. Select profile.
2. Press ) and select Edit .
Name
Connect. profile:
Enter the profile name.
Select the profile provided by your provider
Internet profile:
Select the profile provided by your provider
Relayserver
URL:
Enter the Internet address.
Secure rs URL: Enter the Internet address.
Reset profile
Press ) and select Reset profile
.
A predefined profile cannot be reset if it was locked by your provider.
Home retrieval/Roaming retrieval
Configure when new MMS messages are to be downloaded from the message server for Home and Roaming retrieval.
Automatic Messages are automatically downloaded as soon as an MMS notification is received.
Always ask When an MMS notification is received, you are asked whether or not to download it.
Restricted (For Home state only)
When an MMS notification is received, only the notification is displayed.
Req. read report
If this function is activated, a report is sent back when the recipient reads the
MMS message for the first time.
Req. deliv report
If this function is activated, a report is sent back when the recipient has downloaded the MMS message.
Delivery time
Select how long an MMS message should be held on the server before sending it to the recipient.
Validity period
If an MMS message could not be delivered during this period, it is automatically deleted from the server.
Hide number
Your number is withheld from the recipient.
Anon. messages
If set to Reject , anonymous
MMS messages are automatically rejected.
Allow read report
( Network-support-dependent)
If this function is activated, requested read reports are enabled.
If set to Yes confirm the charge notification.
Allow deliv report
If this function is activated, requested delivery reports are enabled.
If set to Yes confirm the charge notification.
Creation mode
You can restrict the content that can be added to an MMS.
The following settings are possible:
Message settings 51
Free
You can add any content to the MMS.
Warning
You are warned when attempting to add content to an MMS that cannot be sent.
Restricted
An error message is displayed if you attempt to add content that is not compliant.
Auto signature
Save sent items
Allow adverts
If the function is deactivated,
MMS-based advertisements are automatically rejected.
Emoticons
Text size
Max msg size
The size restriction affects only MMS messages created. It does not restrict the message download.
This setting is not available if
Creation mode is set to Free .
52 Message settings
Depending on the current creation mode, a warning is displayed or creation is restricted if the limit is exceeded.
E-mail settings
Before using the e-mail service you must set the server access and your e-mail parameters. You will receive the necessary data for this from your service provider.
The e-mail parameters are configured in up to five different accounts. One account might be predefined by your provider. You cannot edit predefined accounts.
Messages
> E-mail .
> Message settings
Activating an account
If an account is already configured: select the account and press activate it.
to
Deleting an account
Press ( Options ) and select Delete .
All e-mails in the Inbox, Drafts and Sent folders and all attachments belonging to the deleted account are deleted.
Editing an account
Edit the account according to the information from your provider.
Press ( Options ) and select Edit .
User info
Your name: Your name.
E-mail address: Your e-mail address
Reply-to address:
User ID:
Additional e-mail address to use for replies.
Your login name for the e-mail server.
Password:
SMTP user ID: Your login name for the send server. Only if
SMTP authenticate: is enabled in “Connection info” settings
Send server password:
Your password for the e-mail server.
Only if SMTP authenticate: is enabled: your password for the SMTP server.
Message settings 53
Connection info
You can configure accounts with two different receive server types: POP3 and
IMAP4. The configured accounts may have different server types.
Data service provider:
Receive server type:
Select connection profile.
Select POP3 / IMAP4 .
POP3 server: If you want to use a POP3 server, enter the Internet address of the receive server. You may leave the input field empty if you are not using a POP3 server.
POP3 server port:
Enter the port number of the POP3 receive server
(default: 110).
POP3 uses
SSL/TLS:
Activate/deactivate encryption in communication with the POP3 server.
IMAP4 server: If you want to use an
IMAP4 server, enter the
Internet address of the receive server. You may leave the input field empty if you are not using an
IMAP4 server.
IMAP4 server port:
Enter the port number of the IMAP4 receive server
(default: 143).
IMAP4 uses
SSL/TLS:
Activate/deactivate encryption for communication with the IMAP4 server.
SMTP server:
Enter the Internet address of the send server.
SMTP server port:
SMTP uses
SSL/TLS:
Enter the port number of send server (default: 25).
Activate/deactivate encryption in communication with the send server.
SMTP authenticate:
Activate/deactivate authentication on the send server.
Msg preferences
Download mode:
Select Only headers /
Full message / Ask user .
Max msg size
(KB):
Enter the maximum e-mail size that is retrieved on the phone.
For POP3 this value includes attachments, for
IMAP it includes only the e-mail body.
Copy on serv.(POP3):
(POP3 accounts only)
Select Yes / No . If No selected, the e-mail is deleted on the server when it has been downloaded to the phone.
is
54 Message settings
When del.ph.
(POP3):
(POP3 accounts only)
Select
Del. on server
/
Leave on serv.
If
Del. on server is selected, the e-mail is deleted on the server when it is deleted on the phone.
IMAP4 accounts always delete e-mail on the server when deleted on the phone.
Save sent message:
Save a copy of the sent e-mails in the local Sent folder.
To save sent e-mails on a server you should set your own address as
CC.
Include orig on reply:
Req. deliv. receipt:
Include the original text in the reply message.
A report is sent back when an e-mail is delivered successfully.
Request read receipt:
A report is sent back when the recipient reads an e-mail.
Add signature
Select No e-mail / New e-mail / All e-mails .
Create signature
Enter signature and confirm with .
CB settings
Messages
>
Message settings
>
Cell broadcast
Receive broadcasts
Activate and deactivate the CB service.
The standby time for the phone will be reduced if the CB service is activated.
Cell info display
Select whether or not the local cell information should be displayed in standby mode.
Topic list
You can configure the broadcast messages types you want to receive. The list of configured topics is displayed. You can add/remove topics.
Press ( Options ).
Descarcă
Publicitate