Trim-Tex Tear Away Shadow Bead Installation Guide

Tear Away Shadow Bead with Flexible Leg

Add a dash of flavor to any room by using the Tear Away

Shadow Bead to create a reveal effect when butting up to ceilings, base trims, and other finished interior architectural components. This solution features a tear-off strip to leave a clean finished edge.

Installation Guide

Technical Specs

1"

Scan Below for

Installation Video

Step 1:

A

B

Before Installation:

Measure, cut and dry fit the bead.

Step 1:

Coat the bead with Trim-Tex 847 Spray

Adhesive. Press the bead in place, applying pressure to the mud legs.

Step 2:

Staple every 6”-8” using ½” staples.

Step 3:

Finish with drywall compound. Remove tear-off strips prior to sanding.

Step 3:

Step 2:

3700 W Pratt Avenue, Lincolnwood, IL 60712 • (800) 874-2333 • trim-tex.com 1 of 1