New Features Guide

Version 1.20

Features added or changed as a result of fi rmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates available for diff erent products: https://fujifilm-x.com/support/download/firmware/cameras/

BL00005251-200 EN

Contents

X-H2 fi rmware version 1.20 adds or updates the features listed below. For the latest manuals, visit the following website.

https://fujifilm-dsc.com/en/manual/

No.

22

X-H2

Description

D  SCREEN SET-UP  > DISP. CUSTOM SETTING  >

IMAGE TRANSFER ORDER

has been renamed

COMMUNICATION STATUS and can now be used to

P

23 toggle the image transfer order and connected device displays on or off simultaneously.

The TG-BT1 tripod grip has been added to the optional accessory list.

See

P

Ver.

1

1.20

340

2

1.20

Changes and Additions

Changes and additions are as follows.

X-H2 Owner’s Manual: P

Customizing the Standard Display

3 Choose items.

Highlight items and press MENU/OK to select or deselect.

• FRAMING GUIDELINE

• FOCUS FRAME

• AF DISTANCE INDICATOR

• MF DISTANCE INDICATOR

• HISTOGRAM

• LIVE VIEW HIGHLIGHT ALERT

• SHOOTING MODE

• APERTURE/S-SPEED/ISO

• INFORMATION BACKGROUND

• Expo. Comp. (Digit)

• Expo. Comp. (Scale)

• FOCUS MODE

• PHOTOMETRY

• SHUTTER TYPE

• FLASH

• CONTINUOUS MODE

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

DUAL IS MODE

TOUCH SCREEN MODE

WHITE BALANCE

FILM SIMULATION

DYNAMIC RANGE

BOOST MODE

COOLING FAN SETTING

FRAMES REMAINING

IMAGE SIZE/QUALITY

MOVIE MODE & REC. TIME

DIGITAL TELE-CONV.

COMMUNICATION STATUS

MIC LEVEL

GUIDANCE MESSAGE

BATTERY LEVEL

FRAMING OUTLINE

1

X-H2 Owner’s Manual: P

Accessories from Fujifi lm

The following optional accessories are available from Fujifi lm.

For the latest information on the accessories available in your region, check with your local Fujifi lm representative or visit https://fujifilm-x.com/support/compatibility/cameras/ .

NP-W235 : Additional high-capacity NP-W235 rechargeable batteries can be purchased as required.

BC-W235 : The BC-W235 can charge up to two NP-W235 batteries at a time. At

+25 °C/+77 °F, the batteries will charge in about 200 minutes. Using a device that supplies power with an outputs of 30 W or above reduces charging times to as little as 150 minutes.

EC-XH W/EC-XT L/EC-XT M/EC-XT S/EC-GFX : Attach viewfi nder eyecups to prevent light leaking into the viewfi nder window.

RR-100 : Use to reduce camera shake or keep the shutter open during a time exposure (

⌀

2.5 mm).

MIC-ST1 : An external microphone for movie recording.

XF-/XC-series lenses : Interchangeable lenses for use exclusively with the FUJIFILM

X-mount.

FUJINON MKX-series lenses : Cinema lenses for the FUJIFILM X-mount.

MCEX-11/16 : Attach between the camera and the lens to shoot at high reproduction ratios.

XF1.4X TC WR : Increases the focal length of the compatible lenses by about 1.4×.

XF2X TC WR : Increases the focal length of the compatible lenses by about 2.0×.

2

FUJIFILM M MOUNT ADAPTER : Allows the camera to be used with a wide selection of M-mount lenses.

BCP-001 : Cover the camera lens mount when no lens is attached.

EF-X500 : In addition to manual and TTL fl ash control, this clip-on fl ash unit has a

Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the fl ash sync speed. Featuring support for the optional EF-BP1 battery pack and Fujifi lm optical wireless fl ash control, it can be used as a commander or remote fl ash unit for remote wireless fl ash photography.

EF-BP1 : A battery pack for EF-X500 fl ash units. Takes up to 8 AA batteries.

EF-60 : In addition to manual and TTL fl ash control, this clip-on fl ash unit has a

Guide Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the fl ash sync speed. It can also be used as remote fl ash under the control of an optional EF-W1 wireless commander.

EF-W1 : With support for the NAS * wireless communication standard developed by Nissin Japan, this wireless fl ash commander can be used with optional EF-60 clip-on fl ash units and other NAS-compliant units.

* NAS is a registered trademark of Nissin Japan Ltd.

EF-X8 : This compact, clip-on fl ash unit draws power from the camera has a Guide

Number of approximately 8/26 (ISO 100, m/ft.) and can cover the angle of view of a 16 mm lens (equivalent to 24 mm in 35 mm format).

EF-42 : This clip-on fl ash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL fl ash control.

EF-X20 : This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL fl ash control.

EF-20 : This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL fl ash control (manual fl ash control is not supported).

VG-XH : See “Vertical battery grip s”.

3

FT-XH : See “File Transmitter s”.

FAN-001 : See “Cooling Fan s”.

TG-BT1 : Record movies, take photographs, or adjust zoom on compatible power zoom lenses while holding this Bluetooth tripod grip.

GB-001 : Improves grip. Combine with a hand grip for more secure handling.

CVR-XH : A set of covers for the X-H2. Contains a sync terminal cap, a hot-shoe cover, and a memory card slot cover, as well as two fi le transmitter/vertical battery grip connector covers.

SP-1/SP-2/SP-3 : Connect via wireless LAN to print pictures on instax fi lm.

4

MEMO

5

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN https://fujifilm-x.com