advertisement
Ground Fixed
Harmony Flowers
Page 1 of 4
Metric Conversion:
400mm/ 16”
1100mm/ ”
1.5m/ 59”
Installation Instructions
1. Lay packaging out on floor and clear workspace with non-abrasive surface for assembly to prevent marking of polished stainless steel.
x2 x2 x2
Weight of heaviest part 5Kg (Large Flower) x3
2. Unpack ground fixing extensions.
3. Cluster extensions together with M10 tapped holes facing outward and ground fixing holes aligned
(See Page 3). Insert
M10x200mm threaded bars into ground fixing holes and secure loosely with M10 BZP nuts.
4. Unpack Flowers and posts.
5. Pair Flowers with their respective posts, and assemble each Flower onto it’s post (See
Page 2).
6. Sleave each post over an extension (clustered) and secure with an M10x30
Screw, ensure their orientation and configuration is correct before tightening.
7. Excavate a hole for the frame 250mm diameter, tapering down to 350mm,
450 deep in desired location upon decision from customer.
8. Locate (lower) frame into hole making sure that the flowers are level and upright.
9. Locate (lower) frame into hole making sure that the flowers are level and upright.
Do not bury the bolt and barrel nut holes.
10. Once happy with location of the Flowers, fill hole using rapid hardening concrete. Be sure to compact concrete around legs and leave to dry according to manufactures guidelines.
Ground Surface
Ground Fix
Components: x3
M10x200 Threaded bar x6
M10 BZP Nut
BS EN 1176
Small
Beaters X3
1.5m
1100mm
400mm
1.5m
Install
Instrument with 1.5m free space (from widest point) around it.
CAUTION: Frame surface can get hot in direct sunlight, if possible install in shaded areas.
Spares available from percussionplay.com or from your local distributor
15 Kg
Ground Fixed
Harmony Flowers
Page 2 of 4
Components:
Saddle Straps x3 x6
M6x20 Security Screw
Installation Instructions
BS EN 1176
Small
Beaters X3
Spares available from percussionplay.com or from your local distributor
24 Kg
Ground Fixed
Harmony Flowers
Page 3 of 4
Assembly Guide PPHARMF
1.
2.
Components: x3
M10x30mm Pin Torx
3.
Tools: x1
TX 45 Driver Bit
BS EN 1176
Small
Beaters X3
Ground Fix
Components: x3
M10x200 Threaded bar x6
M10 BZP Nut
Spares available from percussionplay.com or from your local distributor
15 Kg
Ground Fixed
Harmony Flowers
Page 4 of 4
Ground Fix Installation
1.
2.
Foundations should not present a hazard. These foundations are recommended as a guide, for more information on foundation details for various surface see Part 1 of BS EN 1176.
3.
Ground Fix
Components: x3
M10x200 Threaded Bar x6
M10 BZP Nut
Metric Conversion:
50mm/ 2”
250mm/ 10”
350mm/ 14”
400mm/ 16”
450mm/ 18”
BS EN 1176
advertisement
Related manuals
advertisement