WOLFVISION Cynap Pure SDM Wireless BYOD Presentation System SDM Slot Module Installation Guide

WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
1
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
vSolution Cynap Pure SDM
Network Integration
1.
Basics .......................................................................................................................... 3
2.
Glossary ....................................................................................................................... 3
2.1.
LAN / Ethernet settings ............................................................................................ 3
2.2.
WLAN settings – access point ................................................................................. 4
2.3.
WLAN settings – infrastructure (Cynap Pure SDM acts as client) ............................ 5
2.4.
Date and time (General Settings) ............................................................................. 6
2.5.
Host name (General Settings).................................................................................. 6
2.6.
LAN / WLAN port ..................................................................................................... 6
2.7.
Proxy settings .......................................................................................................... 8
2.8.
Security ................................................................................................................... 9
3.
Network integration (examples) ...................................................................................10
3.1.
Stand-alone access point mode (without wired network integration) .......................10
3.2.
Cynap Pure SDM wireless network access point mode ..........................................11
3.3.
Cynap Pure SDM network infrastructure mode .......................................................13
4.
Firewall rules ...............................................................................................................15
5.
Differences in Open Mode / Protected Mode ...............................................................19
6.
BYOD ..........................................................................................................................20
7.
User interface ..............................................................................................................21
8.
Hardware and OS........................................................................................................22
9.
Administration .............................................................................................................22
10.
Bandwidth Measurement Data ....................................................................................23
10.1.
PowerPoint Presentation ........................................................................................23
10.2.
Multimedia from Notebook to Cynap Pure SDM using vCast Software ...................23
11.
Client System Requirements .......................................................................................24
12.
Index ...........................................................................................................................25
2
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
1. Basics
Before starting, check the existing infrastructure and define the required equipment and
settings.
Various examples in this document show the different ways in which Cynap Pure SDM can
be integrated into the network.
When connecting Cynap Pure SDM to LAN and WLAN at the same time, please use different
IP ranges in order to prevent address conflicts.
The listed IP addresses are only examples.
Cynap Pure SDM can be treated as a standard network device and it is as secure as the
supporting network. Cynap Pure SDM cannot be considered as a router, switch or firewall.
Communication to other networks and access must to be controlled using your existing
equipment (firewall, router, switch and so on).
By default, the built-in access point is enabled, SSID and password are the serial number of
the unit (inclusive leading zero, e.g. 0106406).
2. Glossary
This glossary will assist you in setting up the network correctly. Please note that in order to
connect Cynap Pure SDM to an existing company network, some information from the local
administrator is required.
2.1. LAN / Ethernet settings
Priority Interface Access
DHCP
IP address
Subnet mask
Gateway
Name server 1 / 2
Identity
Anonymous Identity
Authentication
Authentication Method
Root Certificate
The higher prioritized interface (value = 1) will be used for
network services first. Ensure that the value is different from
the WLAN interface priority.
Cynap Pure SDM will get all network settings automatically
from the DHCP server in the existing network. Switch it to
OFF to set the static addresses manually.
Unique address in the network, i.e. 192.168.0.100. The IP
address of Cynap Pure SDM can for example be set to
192.168.0.1.
Available IP addresses can be limited. A commonly used
subnet mask would be 255.255.255.0
Defines the IP address of the server / connection to other
networks (such as the internet). When Cynap Pure SDM is
directly connected only to a PC, then enter the IP address of
the PC.
Input the IP address of the preferred Domain Name System
(DNS). This Server translates domain names into
corresponding IP addresses.
Login credentials to connect Cynap Pure SDM in a protected
network. (802.1x).
The identity to be used on an unencrypted session before
Identity is being validated on an encrypted session.
Allows authentication according to IEEE 802.1X
Enter valid login data to connect.
Supported are PEAP with MSCHAPv2 and TTLS-PAP
Only root certificates are supported, load the certificate by
using the Web Interface through the WLAN interface.
Allowed certificates:
•
root certificate (CA) with common file extension .crt
3
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
Base-64-coded X.509 encoded DER certificate
•
Privacy Enhanced Mail with common file
extension .perm
Base-64-coded X.509 encoded DER certificate
certificate stored between 2 tags: “---Begin Certificate---“and”
------End Certificate-----“
2.2. WLAN settings – access point
Mode OFF
Mode Access Point
Region
Channel
Enable Routing
IP address
Subnet mask
Maximum Number of
Clients
Disable access point.
Enable access point.
Select the region where Cynap will be operated (US-region or
others).
Defines the channel used for wireless communication. For
optimum performance, select a currently unused channel.
In access point mode, Cynap Pure SDM offers non-overlapping
channels only.
Enable Routing allows HTTP/HTTPS traffic of your third-party
device through the LAN interface of Cynap Pure. Gateway and
first Nameserver of the LAN interface will be used.
Warning:
Enabling Internet Routing could be a security risk!
Protect your data from unauthorized access.
Defines the IP address of the access point. Cynap Pure SDM
acts as a DHCP server and provides the necessary network
settings to the connected devices.
Available IP addresses can be limited. A commonly used
subnet mask would be 255.255.255.0
For security reason, the number of supported clients can be
reduced (max. supported 8).
4
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
2.3. WLAN settings – infrastructure (Cynap Pure SDM acts as client)
Use the access point list to check the currently available access point and its signal strength.
Mode Infrastructure
Band
Priority Interface Access
BSSID On / Off
SSID
BSSID
Subnet mask
Gateway IP
Name server 1 / 2
Encryption
Identity
Anonymous Identity
Authentication Method
Root Certificate
Enable Infrastructure, Cynap Pure SDM can be connected as
client to an existing access point.
By default, Cynap Pure SDM uses the 2.4GHz and 5 GHz
frequency band. The used frequency band can be limited to
either 2.4GHz or 5 GHz. This setting is available in SSID mode
only.
The higher prioritized interface (value = 1) will be used for
network services first. Ensure that the value is different from the
LAN interface priority.
Use the button to toggle between SSID and BSSID mode.
With BSSID (Basic Service Set Identification), the used access
point will be fixed and Cynap Pure SDM will connect to the
defined access point only. Access point hopping, which is
available in SSID mode (Service Set Identification), will be
prevented.
Defines the network name in plain text for easy identification of
the WLAN network. Check existing WLAN infrastructure to get
SSID.
Following characters are supported:
- AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuV
vWwXxYyZz
- 0123456789
- _-:$& ()
Defines the network name in plain text for easy identification of
the WLAN network. Check existing WLAN infrastructure to get
SSID. This setting is available in SSID mode only.
Available IP addresses can be limited. A commonly used subnet
mask would be 255.255.255.0
Defines the IP address of the server / connection to other
networks (such as the internet). When Cynap Pure SDM is
directly connected only to a PC, then enter the IP address of the
PC.
Input the IP address of the preferred Domain Name System
(DNS). This Server translates domain names into corresponding
IP addresses.
Defines encryption for safe network traffic. All connected units
must use the same algorithm (None, WEP, WPA2, WPA2
Enterprise).
Login credentials to connect Cynap Pure SDM in a WPA
Enterprise protected network.
The identity to be used on an unencrypted session before
Identity is being validated on an encrypted session.
Supported are PEAP with MSCHAPv2 and TTLS-PAP
Only root certificates are supported, load the certificate by using
the Web Interface through the LAN interface.
Allowed certificates:
•
root certificate (CA) with common file extension .crt
Base-64-coded X.509 encoded DER certificate
5
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
•
Privacy Enhanced Mail with common file
extension .perm
Base-64-coded X.509 encoded DER certificate
certificate stored between 2 tags: “---Begin Certificate---“and” -----End Certificate-----“
Signal Level Limit (dBm)
Signal Level
Reconnect Counter
(Connection Loss)
Reconnect Counter (Low
Signal Level)
Defines when Cynap Pure SDM start to search for another
access point with the same SSID in your infrastructure (WLAN
roaming). Monitoring the current signal level to prevent too low
values. Lookups could interrupt the network connection shortly
and every lookup will be counted (Reconnect Counter (Low
Signal Level).
Shows the current strength of the WLAN signal in dBm.
Counts every connection loss, e.g. when the selected access
point would be powered down.
Counts every lookup then the measured signal falls below the
user defined signal level limit.
2.4. Date and time (General Settings)
Time source
Cynap Pure SDM has a built-in battery-buffered RTC clock
(Real Time Clock). Settings will only be lost if the battery is
empty. To eliminate the risk of incorrect time stamps, Cynap
Pure SDM can be synchronized to an external time server.
Select external and input a valid IP address or URL of a NTP
time server.
2.5. Host name (General Settings)
Host name
The Host name can be changed in the settings under general
settings. The host name can be useful for network
administrators to see the device name in plain text in the list of
clients. Please note, this host name is not automatically listed
in the DNS list, and therefore cannot be used in a browser
without DNS registration.
2.6. LAN / WLAN port
The LAN port enables integration of Cynap Pure SDM into an internal network.
Administrators of a large number of Cynap Pure SDM systems can use the LAN port to
control, support and update all of their units from their local desktop PC.
The list of applications for the Cynap Pure SDM LAN port is constantly increasing. It can be
used for controlling, capturing still images, viewing live video streams, firmware updates,
adjustments, menu settings and for maintenance purposes. Some features are only
supported when using vSolution Link software.
The following protocols are supported: TCP/IP, IGMP, RTP, RTSP, UDP and ARP.
Supported (tested) internet browsers are: Microsoft Edge, Firefox, Chrome, and Safari.
By default, DHCP is activated to receive all network settings automatically from the server.
6
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
Hint - WLAN:
To ensure optimal performance of supplied remote control (optional), prevent channel 13 in
the band of 2.4 GHz. Switch Cynap Pure SDM to standby closes all connections.
7
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
2.7. Proxy settings
To increase security level, use a proxy server to control HTTP and HTTPS traffic from Cynap
Pure SDM. Built-in access point and other local services are not controlled. To take effect the
new settings, Cynap Pure SDM will reboot automatically.
Proxy enable
URL
Host Port
Authentication
Username
Password
Enable / disable proxy service
When enable, all HTTP and HTTPS traffic will be routed to
your proxy server.
URL of the proxy server in your network, like 104.236.10.17
(or DNS name up to 256 characters, no space between the
characters). DNS server not required, when using IP
addresses.
Port, set the used network port to connect to your proxy
server.
Disable / enable Authentication
When enabled, valid user name and password has to be
entered.
Username, given by your server.
Password, given by your server.
8
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
2.8. Security
Admin password
Defines the necessary password for administrator access. This login data is needed to
change the Ethernet Mode, and an existing administrator password.
Using the login data, an administrator can connect to Cynap Pure SDM
at any time. The default password is “Password”. Remember to make a
note of any changed passwords!
Login Security
Accessing Cynap Pure SDM can be protected by authentication (admin, moderator or PIN).
To prevent unauthorized access of the settings, the admin password needs to be entered
once per session.
Network Security
Accessing Cynap Pure SDM can be limited to secure connections only (https). Please note,
the accessing application needs to support SSL / TLS (e.g. the most modern browsers are
supporting HTML5 and SSL /TLS).
Wolfvision support access can be prohibited by disabling SSH.
LAN Security
When using wired network, use authentication (according 802.1x) to maximize security.
When using certificates, load it busy using the Web Interface.
WLAN (WiFi) Security
When using wireless network, use encryption to maximize security.
Cynap Pure SDM complies with following standards:
• WEP
• WPA2
• WPA2 Enterprise (according 802.1x)
Hint
WEP allows password with a length of 13 characters.
WPA2 allows password with a length of 8 ~ 63 characters.
Use special characters carefully, not every third party device can handle it.
When using WPA2 Enterprise, load the certificate by using the Web Interface.
9
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
3. Network integration (examples)
The following examples are showing different ways to integrate Cynap Pure SDM into your
network infrastructure, one network and one wireless network.
BYOD (bring your own device) allows sharing the screen content of different devices with
various operating systems to Cynap Pure SDM to share to a big display device.
3.1. Stand-alone access point mode (without wired network integration)
Cynap Pure SDM is operated in stand-alone access point mode.
Cynap Pure SDM is acting as DHCP server to provide the addresses to your WLAN devices.
Cynap generates an independent WLAN, and WLAN enabled devices (BYOD) can connect
to Cynap Pure SDM.
Advantages:
- No complex network infrastructure necessary
- Cynap Pure SDM generates its own stand-alone access point
- No connection to internal IT infrastructure
- Security issues - no other unit from the internal IT infrastructure can access Cynap
Pure SDM
Disadvantages:
- No devices have internet access
10
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
3.2. Cynap Pure SDM wireless network access point mode
Cynap Pure SDM integrated via a cable connection into an existing network, and operates in
wireless network access point mode additionally. LAN settings for Cynap Pure SDM can be
obtained from an existing DHCP server. Cynap Pure SDM generates an independent WLAN,
and WLAN enabled (BYOD) can connect to Cynap Pure SDM.
Advantages:
- All devices can communicate with each other
- Cynap Pure SDM has access to the internet.
- Cynap Pure SDM can access the internet to check for firmware updates without using
additional devices
- Security issues – BYOD devices over the access point have no access to the existing
network and internet.
11
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
Disadvantages:
- Performance issues (all traffic is on the same network)
Hint:
If the units are in different subnets, Cynap Pure SDM might not be able to be discovered
automatically by vSolution applications.
12
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
3.3. Cynap Pure SDM network infrastructure mode
Cynap Pure SDM is integrated to an existing wired network (e.g. Corporate network) wired,
and additionally connected to a wireless network (e.g. Guest network as separate VLAN).
LAN and WLAN settings for Cynap Pure SDM can be obtained from an existing DHCP
server. All devices of the Corporate and also the Guest network can be connected to Cynap
Pure SDM.
Advantages:
- All devices can communicate with each other
- Cynap Pure SDM has access to the internet.
- Cynap Pure SDM can be moved within the range of the access point
- Cynap Pure SDM can access the internet to check for firmware updates without using
additional devices
13
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
Disadvantage:
- Performance issues (all traffic is on the same network)
Hint:
If the units are in different subnets, Cynap Pure SDM might not be able to be discovered
automatically by vSolution applications.
Cynap Pure SDM can also be installed in a VLAN.
14
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
4. Firewall rules
Cynap Pure SDM has firewall rules that must be adhered to in order to allow successful
network communications, and the corresponding services to be used. To use services with
user defined addresses and ports, be sure these are not blocked by your firewall.
Function /
Application
Inbound /
Outbound
Description
TCP / UDP
UDP
TCP
TCP
TCP
Inbound /
Outbound
Inbound
Inbound
Inbound
Inbound
Inbound
Multicast DNS (mDNS
224.0.0.251) Bonjour
Audio for Airplay
Audio for Airplay
Primary Airplay communication
Airplay video communication
Airplay audio communication
4100
4101
5000
TCP / UDP
UDP
TCP
Inbound
Inbound
Inbound
7000
7100
47000
TCP
TCP
TCP
Inbound
Inbound
Inbound
Audio for Airplay
Audio for Airplay
AirPlay communication with legacy
devices
Primary Airplay communication
Airplay video communication
Airplay audio communication
5353
UDP
1900
4100 –
4164
8008
UDP
TCP / UDP
Inbound /
Outbound
Inbound
Inbound
Multicast DNS (mDNS
224.0.0.251)
Chromecast discovery
Audio for Chromecast
TCP
Inbound
8009
32768 –
61000
TCP
UDP
Inbound
Inbound
/Outbound
Primary Chromecast
communication
Communication Chromecast
Chromecast (video data stream)
5353
UDP
Inbound
67 / 68
UDP
Inbound
UDP
Inbound
RTSP Control
19000 –
19007
19010 –
19017
7236
TCP
Outbound
MS-MICE Control
7250
TCP
Inbound /
Outbound
Touchback
50000
TCP
Outbound
Airplay
Multicast DNS
(mDNS)
Audio
Audio
Airplay
Video
Audio
Airplay Bluetooth
for Device
Discovery
Audio
Audio
AirPlay
Airplay
Video
Audio
Chromecast
Multicast DNS
(mDNS)
Discovery
Audio
Chromecast
Chromecast
Video data stream
Miracast MS-MICE
Multicast DNS
(mDNS)
DHCP
RTP Stream
Port
Type
5353
UDP
4100
4101
7000
7100
47000
15
Multicast DNS (mDNS
224.0.0.251)
DHCP communication between
device and receiver
RTP media traffic port for delivering
audio and video
RTSP control port is used to
establish and manage session
Control port on which Cynap family
system listen for Miracast packets
when over existing network mode
is enabled
This port is for touchback to send
mouse events back between
Cynap to the Windows computer. If
this port is blocked, bi-directional
inputs is not possible.
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
UDP
Inbound
Hardware cursor to reduce latency
when using touchback.
Wake On LAN
19020 –
19027
19030 –
19037
7/9
UDP
SSH
http, Cynap control
22
80
TCP
TCP
Inbound /
Outbound
Inbound
Inbound
Usually port 7 is used for sending
the magic packet
Access for Wolfvision support
This port used to connect to Cynap
web interface (httpd). If this port is
blocked, no connection can be
made.
https, SSL, e.g.
Cloud Service,
Cynap control
443
TCP / UDP
Inbound
NTP
123
UDP
Outbound
PJLink
4352
TCP
Outbound
This port is used to cloud service
and for secure connect to Cynap
web for secure connect to Cynap
web interface. If this port is
blocked, no connection can be
made.
For optional clock synchronization
by a time server (Network Time
Protocol, NTP)
This is the default port for PJLink
and cab be changed in the settings
(Peripheral Control)
vSolution Cast
Discovery Multicast
50000
UDP
Inbound
Device Discovery
50913
UDP
Inbound
For control purposes
50915
TCP
Inbound
TLS Control
50917
TCP
Inbound
Video streams
50921
TCP
Inbound
Touchback
50922
TCP
Outbound
Hardware cursor
extension
16
This port is used for device
discovery all available Cynap and
Visualizer in the network by
vSolution applications (uses
Multicast IP address
239.255.255.250). If this port is
blocked, vSolution applications
may not be able to find devices
automatically.
This port is used for device
discovery
This port is used for control
purposes e.g. room control system,
and others). If this port is blocked,
no control is possible
This port is for secure
communication between
WolfVision applications (e.g.
vSolution App) to Cynap and / or
Visualizer. If this port is blocked,
secure communication to Cynap
and / or Visualizer, inclusive
firmware updates are blocked.
Video streams between Wolfvision
App to Cynap and Visualizer. If this
port is blocked, no stream are
possible.
This port is for touchback between
Cynap and Wolfvision App
vSolution Cast to send mouse
events back to the Windows
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
computer. If this port is blocked, bidirectional inputs is not possible
vSolution App iOS /
Android / Windows
Discovery Multicast
50000
UDP
Inbound
This port is used for device
discovery all available Cynap and
Visualizer in the network by
vSolution applications (uses
Multicast IP address
239.255.255.250). If this port is
blocked, vSolution applications
may not be able to find devices
automatically.
http, Cynap control
80
TCP
Inbound
https, SSL, e.g.
Cloud Service,
Cynap control
443
TCP
Inbound
Device Discovery
50913
UDP
Inbound
For control purposes
50915
UDP
Inbound
TLS Control
50917
TCP
Inbound
TLS Control
50917
TCP
Inbound
WebSocket
7681
TCP
Inbound
WebSocket
7682
TCP
Inbound
This port is used to connect to the
Cynap web interface (httpd). If this
port is blocked, no connection can
be made.
This port is used to cloud services
and for secure connect to the
Cynap web for secure connect to
the Cynap web interface. If this port
is blocked, no connection can be
made.
This port is used for device
discovery.
This port is used for device
discovery.
This port is for secure
communication between
WolfVision applications (e.g.
vSolution App) to Cynap and / or
Visualizer. If this port is blocked,
secure communication to Cynap
and / or Visualizer, inclusive
firmware updates are blocked
This port is for secure
communication between Wolfvision
application (e.g. vSoltuion Link) t
Cynap and / or Visualizer. If this
port is blocked, secure
communication to Cynap and / or
Visualizer, inclusive firmware
updates are blocked.
User interface communication with
Cynap (via browser)
User interface communication with
Cynap (via fully integrated
Visualizer)
vSolution Link Pro
Wake On LAN
7/9
UDP
DNS
53
TCP / UDP
Inbound /
Outbound
Inbound /
Outbound
17
Wake On LAN – Usually port 7 is
used for sending the magic packet
DNS – This port will be used for
Domain Name System. If this port
is blocked, DNS service are not
available
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
http, Cynap control
80
TCP
Inbound
https, SSL, e.g.
Cloud Service,
Cynap control
443
TCP
Inbound
SMTP
587
SMTP
Outbound
Discovery Multicast
50000
UDP
Inbound
Device Discovery
50913
UDP
Inbound
For control purposes
50915
TCP
Inbound
18
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
This is the default port to connect
to the web interface (httpd) of
vSolution Link Pro. Of this port is
blocked, connection cannot be
established
This is the default port to connect
to web interface (https) of vSolution
Link Pro. If this port is blocked,
connection cannot be established.
Mail Server – Port for
communication with SMTP server.
This port is used for device
discovery all available Cynap and
Visualizer in the network by
vSolution applications (uses
Multicast IP address
239.255.255.250). If this port is
blocked, device discovery is not
possible
This port is used for device
discovery. If this port is blocked,
device discovery is not possible.
This port is used for control
purposes. If this port is blocked, no
control is possible
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
5. Differences in Open Mode / Protected Mode
When using Cynap Pure SDM, it is possible to choose between either Open or Protected
Mode in Cynap settings.
Modes:
Open Mode
The open is intended for quick and easy connections and BYOD without the need of high
security and big effort for administration.
When Open Mode is active, all available devices can connect to Cynap Pure SDM.
Additionally, a user password cab be set.
In the Open Mode, Airplay, Miracast and / or vSolution Cast PIN can be used to prevent
disturbance of external devices. The PIN will be shown on the connected display only
(HDMI).
Protected Mode
This mode allows desired mirroring sessions only, to prevent misuse and disturbances.
The moderator has to enable a coming session in front by using the room management
system. (The room management system needs be correctly implemented)
Mirror Settings
To change the security behaviour to grant or deny connection requests.
To select which kind of mirroring systems could be connected. Disabled systems couldn’t
share their content.
Possible settings are:
• Mode:
Open Mode, everybody can connect.
Protected Mode, every connection or mirroring has to be enabled by using the room
management system.
• Miracast for Android devices
• AirPlay for iOS devices
• Chromecast for Google Chrome
• vSolution Cast
19
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
6. BYOD
Cynap Pure SDM is designed to make it as easy as possible for users to connect to it. Cynap
Pure SDM supports integrated mirroring protocols in its operating system. Users can connect
to Cynap Pure SDM without needing any additional software. The mobile platforms are
AirPlay for iOS devices and Miracast for Android and Windows devices. Regarding laptop
and computer operating systems, AirPlay is also supported for Mac OS X. Windows Intel
Wireless Display is also supported, and this integrates natively with Windows 8.1.
AirPlay
Support for iOS 5.0 (released 2011) and above, or OS X 10.8 Mountain
Lion (released 2012) and above. AirPlay is transmitted via Ethernet /
WLAN. It can be used for displaying up to four sources.
Miracast
Miracast is based on a Wi-Fi direct connection. This means that
Miracast can only be used in close proximity to Cynap Pure SDM. Any
used cabinet will reduce the possible transmission radius.
High WLAN traffic in your environment may reduce the possible radius,
increase the delay of picture transfer or results in reduced image
quality (MICE support could help to increase the radius, the discovery
beacon will be always sent by the dedicated built-in WLAN module.
For more information, please refer to the manual.
vSolution App
vSolution Cast
(Windows)
Chromecast
Screen Mirroring
The vSolution App allows controlling your Cynap Pure SDM. Using our
vSolution App for Android, iOS, macOS, or Windows, with a Cynap
system, enables students or work colleagues to receive shared content
and to control the unit. On Android, iOS and macOS, you can register
your Cynap Pure SDM manually when discovering services are
blocked in your network (Bonjour, mDNS).
In applications where a Wi-Fi direct connection is not possible due to
the installation, multiple Windows devices can be connected at the
same time using the alternative vSolution Cast.
Support for Chromecast capable devices. Chromecast is transmitted
via Ethernet / WLAN. It can be used for displaying up to four sources.
AirPlay, Chromecast, Miracast and vSolution Cast are based on device discovery
technologies for maximum ease of use. Therefore it is necessary that the appropriate
services (See Firewall rules) are available. Alternatively, when using vSolution Cast, a Cynap
Pure SDM IP address can be entered manually. On Windows systems, vSolution Cast can
either be run temporarily by users, or permanently installed (copied). The application can
also be used from a USB stick without needing administrator rights, however with the
restriction that no sound is transmitted.
Switching Cynap Pure SDM to standby closes all connections.
20
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
7. User interface
Cynap Pure SDM can be controlled using any current standard browser. The user interface
has been developed using the latest web programming standards, and this means that there
is no need for additional add-ons or plugins such the Java Platform, in order to have full
control of Cynap Pure SDM. HTML5 technology only requires a browser that can handle
JavaScript and WebSockets, and this has been state-of-the-art for the last few years.
You can also adjust the settings using the remote control (optional). The remote control uses
the 2.4 GHz band. The remote control has a built-in gyro sensor and can be used as a digital
laser pointer.
Cynap Pure SDM can also be used in combination with room management systems.
Communication is possible via the Wolfprot protocol. More information about this protocol
can be found in the support section of our website www.wolfvision.com .
The vSolution App allows smartphones / tablets (iOS, Windows, Android) to control Cynap
Pure SDM directly via WLAN. More information about the vSolution App can be found on in
the support section of our website www.wolfvision.com .
21
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
8. Hardware and OS
Cynap Pure SDM uses a Linux operating system. The distribution is a WolfVision specific
variant, which in addition to the Linux kernel contains only the individual libraries and
packages required for the functionality of Cynap Pure SDM. This operating system is
efficient, secure and lean. The operating system is installed after the installation process, and
every update is installed to a read-only partition that cannot be changed after the installation
process. This feature and the strict separation of system and user data, such as pictures,
videos etc. ensures a very high level of system security. The system structure is protected
against any external access, and it does not require additional security programs (antivirus,
firewall, etc.). The Cynap Pure SDM system includes all viewer and software packages, and
no additional licenses are required.
The current hardware specifications, connectors, delivery, and technical specifications can
be found on our website www.wolfvision.com.
9. Administration
Cynap Pure SDM can be managed using the vSolution Link Pro software.
With vSolution Link Pro software, administration tasks, like firmware updates, can be
performed for multiple Cynap systems simultaneously. With this tool, you can also determine
the state of your Cynap system and sending a Wake-on-LAN (WoL) command. You can
create, manage and distribute a settings profile to all Cynap systems using vSolution Link
Pro software, and you can take backups.
More information about vSolution Link software can be found in the support section of our
website www.wolfvision.com.
22
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
10. Bandwidth Measurement Data
This bandwidth measurement data has been taken using a notebook PC with a Windows
operating system. The computer was connected to Cynap Pure SDM via WLAN, and was
operating in network infrastructure mode.
10.1.
PowerPoint Presentation
Presentation with text and a few graphics are displayed from the notebook and are mirrored
to Cynap Pure SDM using vSolution Cast Software to a single connected client. (Traffic Out)
Max: 2,9 Mbit/s
10.2.
Multimedia from Notebook to Cynap Pure SDM using vCast
Software
1080p video (Big Buck Bunny) is displayed on the notebook and is mirrored using the
vSolution Cast Software to a single connected client. (Traffic Out)
Max: 7 Mbit/s
23
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
11. Client System Requirements
Requirement Airplay Mirroring OS X Mountain Lion v10.8 (Release 2012) or later:
Product
iMac
Mac mini
MacBook Air
MacBook Pro
Mac Pro
Version
Mid 2011 or later
Mid 2011 or later
Mid 2011 or later
Early 2011 or later
Late 2013 or later
Requirement Airplay Mirroring iOS 5.0 (Release 2011) or later:
Product
iPhone
iPad
iPad
iPod touch
Version
4 or later
2 or later
mini or later
5th generation or later
Requirement Miracast:
Product
Android
Microsoft Windows
Windows Phone
Blackberry
Version
4.4.2 or later
8.1, 10, 11
Hardware with Miracast support required
8.1, 10
10.2.1 or later
Requirement Chromecast:
Product
Android
Microsoft Windows
Version
4.0.3 or later
(Chromecast required)
7, 8.1, 10
(Chromecast Browser Plugin required)
24
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
12. Index
Version Date
Changes
1.0
03.08.2020
Created
1.1
30.11.2020
- Minor text edits
- Addition Firewall rules (Miracast / MS-MICE Hardware cursor
extension)
1.2
31.07.2023
- Minor text edits
- Added firewall rules
- Illustrations updated
1.3
18.10.2023
- Addition Firewall rules
25
">