advertisement
©
Copyright 2012 Altech UEC (Pty) Ltd
2 | P a g e
TABLE OF CONTENTS
1 INTRODUCTION ............................................................................. 8
2 FRONT PANEL ............................................................................... 9
3 BACK PANEL ................................................................................ 10
4 INSTALLING AND CONNECTING THE PVR ............................... 11
: ( IMPORTANT ) .............................................. 11
TV) ............................... 12
TV) ..................................... 12
......................................................................................... 13
5 SMART CARD ............................................................................... 13
6 RESTORING TO FACTORY DEFAULTS ..................................... 13
................................................................................................. 13
7 REMOTE CONTROL..................................................................... 14
REMOTE CONTROL BUTTON FUNCTIONS
................................................... 15
8 DSR4639 DECODER FEATURES AND MENU ............................ 16
................................................................................... 16
............................................................................. 17
......................................................................................... 17
............................................................................... 17
......................................................................... 18
................................................................. 18
.......................................................... 18
3 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
9 VOLUME AND MUTE.................................................................... 19
.................................................................................. 19
.............................................................................................. 19
10 SUBTITLES AND CLOSED CAPTIONS ....................................... 20
.................................................... 20
.............................................. 20
................................................................................ 21
.............................................................................................. 22
EPG ............................................................................ 22
.................................................................................. 22
.......................................................................... 22
.............................................................................. 23
............................................................................. 23
LNB ............................................................................... 24
.......................................................................................... 24
............................................................................................ 25
....................................................................... 26
............................................................................................. 26
................................................................................................ 27
..................................................................................... 28
................................................................................. 29
............................................................................................. 30
....................................................................................... 30
................................................................................... 30
............................................................................................ 31
.................................................................................... 31
............................................................................ 32
4 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
13 RECORDING MODES .................................................................. 33
.......................................................................................... 33
............................................................................. 34
) ............................................... 34
...................................................................................... 35
: ....................................................... 36
14 CONFLICTS .................................................................................. 37
............................................................... 37
15 TIME SHIFTING ............................................................................ 38
...................................................... 39
............................................................................................. 41
17 SCHEDULED LIST ........................................................................ 42
............................................................................................. 42
................................................................................ 43
18 TIME-SHIFT LIST .......................................................................... 43
..................................................................... 43
............................................................................................. 43
19 ETHERNET ................................................................................... 44
5 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
21 TROUBLESHOOTING .................................................................. 44
...................................................................................... 44
....................................................... 45
22 FREQUENTLY ASKED QUESTIONS ........................................... 46
?............................................................... 46
? ................................ 46
? ....................................................... 46
6 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
©
Copyright 2012 Altech UEC (Pty) Ltd
7 | P a g e
1 INTRODUCTION
1.1
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
C
ONTENTS
An Altech UEC remote control.
2 x AA batteries.
12 V Power supply adapter with fig 8 power lead.
AV cable
Component video (YPbPr) cable
F-F loop through cable.
User manual
©
Copyright 2012 Altech UEC (Pty) Ltd
8 | P a g e
2 FRONT PANEL
1
2
3
8
9
10
11
6
7
4
5
12
13
Standby button
LEDs
Bi-colour
RED/GREEN
AMBER GREEN
Switches the decoder between ON and STANDBY modes
Indicates response to remote control commands and/or error mode
RED = Decoder in standby mode or an error condition has occurred. GREEN = Normal operation.
Flashes = when there are incoming messages
Flashes = when RCU command received
Front Panel
LED Display
VOL â—„
VOL â–º
CH â–¼
CH â–²
Displays the time (Standby Mode) or displays the selected
TV channel. Front panel with display “REC” if there is a recording in progress
Decreases the volume level
Increases the volume level
Changes to the previous available channel
Changes to the next available channel
Front Panel Release Opens the front panel when pulled
USB Connects to USB device (for software upgrade)
UPGRADE
UPGRADE
RESET
Smartcard Slot
Single key to confirm operation. Use as OK button
Single key to reset software. Combined with button 10 meanwhile to upgrade software from USB
Resets the STB
Insert into/ pull off a smartcard
9 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
3 BACK PANEL
4
5
2
3
1
6
7
8
9
10
11
Power Input connector
Connect to your home AC mains outlet via the supplied power pack
LNB IN Connect to the satellite signal from the dish via the F-connector
LNB Out
R J45
S/PDIF (Coaxial connector)
Loop out for connecting to LNB IN ( 2 )
Connects to Ethernet (currently disabled in this version)
Connects to the Digital Audio coaxial input on TV or AV Home Theater System
TOSLINK (Optical connector)
USB
HDMI
Audio = Left & Right
Connects to the Digital Audio optical input on TV or AV Home Theater System
Connects to USB device (for software upgrade)
Connects to the high definition (HDMI) input on TV or AV home theatre system
Connects to the analog audio inputs on TV
Composite Video ( yellow ) Connects to the video inputs on TV
Video =YPbPr
(Red/Green/Blue)
Connects to the YPbPr inputs on TV ( Component Video )
10 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
4 INSTALLING AND CONNECTING THE PVR
4.1
4.1.1
L
OOP THROUGH CONNECTION
: ( IMPORTANT )
Connect the Loop through F-F connector on LNB1 out to LNB 2 in –see the below picture
W
ITHOUT THIS LOOPED CONNECTION THE
PVR
WILL
NOT FUNCTION
.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
11 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
N
OW CONNECT TO
TV
SET VIA THE FOLLOWING
CONNECTION OPTIONS
:
4.2.1
4.2.2
4.2
O
PTION
A: AV C
ONNECTORS
(S
TANDARD
D
EFINITION
TV)
Connect the satellite signal to the LNB IN input (#2) on the decoder
Connect the Audio / Video cables to the audio (#9) and video (#11) outputs on the decoder and then to the audio and video inputs on the TV or home theatre system.
4.3
4.3.1
4.3.2
O
PTION
B: HDMI C
ONNECTOR
(H
IGH
D
EFINITION
TV)
Connect the satellite feed to the LNB input (#2) on the decoder
Connect a High Definition cable to the HDMI connector (#8), and then connect the other end of the cable to the HDMI connector on the TV.
4.4
4.4.1
4.4.2
4.4.3
O
PTION
C: HDMI C
ONNECTOR
(AV H
OME
T
HEATRE
SYSTEM AND A
H
IGH
D
EFINITION
TV)
Connect the satellite feed to the LNB IN input (#2) on the decoder
Connect a High Definition cable to the HDMI connector (#8), and then connect the other end of the cable to the HDMI input connector of the AV home theatre system.
Then connect the output HDMI of the AV home theatre system to the TV.
NOTE:
C
ONNECTING YOUR TELEVISION DIRECTLY TO THE AUDIO
/
VIDEO OUTPUT OF YOUR
S
ET
T
OP
B
OX
WILL ASSURE A MORE VIVID PICTURE AND ENHANCE YOUR VIEWING ENJOYMENT
.
12 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.5
4.5.6
4.5
Q
UICK
START GUIDE FOR EXISTING
A
URORA
/ DSD4121
OR OTHER
VAST I
NSTALLATION
Remove decoder from packaging.
Insert supplied batteries into the remote control.
Ensure you have connected the loop cable as per 4.1.1
Connect to existing TV and satellite dish to the back of the PVR.
Power up the PVR and wait while the PVR starts up.
If the PVR does not scan first time, Press help & follow installation prompts to change LNB settings.
PVR should lock to service and display video.
5 S
MART
C
ARD
The smart card is paired to this PVR which means that this smart card cannot be used in any other PVR. The smart card is owned & controlled by the network operator. Activation of a smart card is subject to conditions set out by the operator.
6 R
ESTORING TO FACTORY DEFAULTS
Resetting to factory defaults can be useful if you have changed some settings and lost some functions. Resetting will restore the decoder back to its original configuration and all personalised settings will be reversed. The only setting that is not reset is the LNB setting.
Please manually edit this setting to the desired value. Refer to Page 25
6.1
6.1.1
P
IN
N
UMBER
The default pin number is 1234.
13 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
7 R
EMOTE
C
ONTROL
Mute
Playlist
PVR Menu Hot Key
Aspect Ratio
Main Menu
Record
Rewind / Jump Back
Play
Standby
Help
Scheduled list Hot Key
Time-shift list Hot Key
Closed Captions / Subtitles
Pause
Stop
Fast Forward / Jump Forward
©
Copyright 2012 Altech UEC (Pty) Ltd
14 | P a g e
7.1 PVR
REMOTE CONTROL BUTTON FUNCTIONS
Button Name
Button Identification Function
STANDBY Switches the set top box between ON and STANDBY.
MUTE
HELP
PLAYLIST
MEDIA
RECORDING
SCHEDULE LIST
TIME-SHIFT LIST
TV
RADIO
FAVOURITE
Picture In Picture
Aspect Ratio
TEXT
AUDIO CONTROL
CLOSED CAPTION
TV GUIDE
INFO
?
P.LIST
MEDIA
RECORDING
S.LIST
T.LIST
TV
RADIO
FAV
PIP
AR
TEXT
AUDIO
CC
TV GUIDE i
Turns the sound ON/OFF
Launches the Help Information
Launches the Playlist (List of Recordings)
Launches the PVR Menu. From here you can access the Playlist, Scheduled
List and Time-shift list.
No function: reserved for future functionality
Launches the PVR Menu. From here you can access the Playlist, Scheduled
List and Time-shift list.
Launches the list of Scheduled recordings
Launches the list of Time-shift recordings
Tunes to TV channels / Launches TV bouquets if pressed and hold
Tunes to Radio channels / Launches Radio bouquets if pressed and hold
No function: reserved for future functionality
No function: reserved for future functionality
Toggles to different TV screen aspect ratio’s (16:9
→ 4:3 letterbox → 4:3 pan
& scan)
No function: reserved for future functionality
No function: reserved for future functionality
Turns ON/OFF subtitles and closed captions (available only to programs that contain subtitle/closed caption information)
Launches Electronic Program Guide (EPG)
Launches I-plate & extended I-plate for program information
Navigation Arrows (4) and
OK
CHANNEL UP / DOWN
VOLUME UP / DOWN
BACK
MAIN MENU
EXIT
RECORD
PAUSE
STOP
PLAY
REWIND / JUMP BACK
FAST FORWARD / JUMP
FORWARD
4 COLOURED BUTTONS
CH+ / CH-
V+ / V-
BACK
MENU
EXIT
Menu navigation and selection
Allows channel up and down navigation
Adjusts volume up and down
Goes back to previous channel
Launches Main Menu
Leaving a Menu or function
Records selected program / stops current recording
Pauses live TV (when on timeshift) or recorded programs
Stops playback of the recorded program
Starts playback of recorded program or resumes playback of paused live TV program (on Timeshift)
Press to rewind a recorded program or a timeshift program
Press and hold to jump back
Press to Fast forward a recorded program or a timeshift program
Press and hold to jump forward
Functions as required by application as indicated on the onscreen display
0-9 DIGITS
ASTERISK
HASHTAG
*
#
Numerical data entry of channel number, PIN, etc.
No function: reserved for future functionality
No function: reserved for future functionality
15 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
8
DSR4639 DECODER FEATURES AND MENU
8.1 I-P
LATE
The information plate (I-Plate) displays information about the current and next event at the bottom of the screen.
The I-Plate can be launched by pressing the "I” button on the remote.
8.2 C
HANGING
C
HANNELS
8.2.1
8.2.2
To change to a different channel either:
Press the “CH+” or “CH-” buttons on the remote to change the channel to the next/previous channel respectively, or
8.2.3 When the I-Plate is open, press the “LEFT/RIGHT” arrow buttons on the remote.
This allows you to browse the program information of the other channels without changing the channel you are presently viewing. Press OK to switch to that channel
NOTE: The I-Plate will only timeout when changing channels from the “CH+” or “CH-” button. If you have manually opened the I-Plate, the “EXIT” button must be pressed to remove it.
16 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
8.3 I-P
LATE
E
XTENDED
M
ODE
The extended I-Plate displays a short description about the currently selected I-Plate programme, see screen below
8.4 R
EMINDER POPUP
There are two types of reminders, a banner reminder and an Auto-tune reminder. Reminders are used to notify you when a program is about to start.
8.5
8.5.1
8.5.2
8.5.3
H
OW TO SET A REMINDER
To set a reminder, highlight the program you want to be reminded about using either the I-plate or the TV Guide. Press the “OK” button.
“B” will appear next to the program name. This indicates a banner reminder has been set.
Pressing the “OK’ button again will change the “B” to an “A” next to the program name. This indicates an Auto tune reminder has been set.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
17 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
8.6
8.6.1
H
OW TO DELETE A REMINDER
Pressing the “OK’ a third time on the program will remove the “A” next to the program name. The reminder has been deleted.
8.7
8.7.1
8.7.2
E
XAMPLE OF A
B
ANNER
R
EMINDER
A banner reminder will display a pop-up 30 seconds before the start of the programme for which the reminder is set.
Pressing OK when this message is on the screen will change the channel to the reminder program.
Pressing EXIT will remove the message
8.8
8.8.1
8.8.2
8.8.3
8.8.4
E
XAMPLE OF AN
A
UTO
-
TUNE
R
EMINDER
An Auto-tune reminder tunes the decoder to the reminder channel when the programme starts.
There is a 5 second alert before changing channel so that you can cancel the reminder if you are watching something else.
Cancel the reminder by pressing the “EXIT” button.
Tune immediately to the selected programme by pressing the “OK” button, if you do nothing, the decoder will automatically tune to the reminder channel.
18 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
9 V
OLUME AND
M
UTE
9.1
9.1.1
V
OLUME UP AND DOWN
Volume can be controlled by the VOL+ and VOL- buttons on the remote or on the front of the PVR unit.
9.2
9.2.1
V
OLUME
M
UTE
Press the mute button to mute the sound and press it again to un-mute.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
19 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
10
S
UBTITLES AND
C
LOSED
C
APTIONS
10.1
10.1.1
10.1.2
T
URNING ON SUBTITLES
/C
LOSED
C
APTIONS
There is a menu option to enable subtitles. This can be found in the settings menu.
Also it can be enabled using the remote by pressing the “CC” (Closed captions) button on the remote
10.2
10.2.1
10.2.2
T
URNING OFF SUBTITLES OR
C
LOSED
C
APTIONS
Press the “CC” button again to turn off subtitles
Or change the setting in the menu
©
Copyright 2012 Altech UEC (Pty) Ltd
20 | P a g e
11
TV G
UIDE
11.1
11.1.1
11.1.2
11.1.3
8
DAYS OF INFORMATION
The TV Guide offers program information for up to 8 days (if it is available)
To access the TV Guide, press the “TV Guide” button on the remote control.
All information in the TV guide is controlled and populated by the broadcaster.
©
Copyright 2012 Altech UEC (Pty) Ltd
21 | P a g e
11.2
11.2.1
D
ATA
L
OADING
While the TV Guide is loading data, the unit may respond slower. There is a loading data text that appears near the date and time. When this stops flashing, all data has been retrieved and the TV Guide data can be browsed.
11.3
11.3.1
11.3.2
11.3.3
11.3.4
M
OVING AROUND THE
EPG
Use the up/down/left/right buttons to scroll though the event grid.
Use the CH+ and CH- buttons to move the grid by 24 hours.
Press the green button to provide more information on the different icons that can be found in the TV Guide.
Press the “I” button to show more information about the highlighted program.
12 M
ENU
The menu is used to set up the decoder depending on the environment and preference.
12.1
12.1.1
L
AUNCHING THE
M
ENU
To display, press the MENU button while watching TV or listening to the radio.
The screen contains main menu (i.e. on the left hand side) and sub menu (i.e. on the right hand side). Press EXIT to return to watching TV or listening to the radio
12.2
12.2.1
12.2.2
M
OVING
A
ROUND THE
M
ENU
Press the right arrow to move the highlight to the sub menu.
Press the left arrow to move the highlight back to the main menu section.
22 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
12.3
12.3.1
12.3.2
12.3.3
12.3.4
12.3.5
C
HANGE
M
ENU
S
ETTINGS
Up the up down keys to move the highlight to the different options
Press the right arrow to move to the sub menu
Use the up and down arrow keys to move through the sub menu
Highlight the correct option and press OK to edit it
Use the left and right keys to select options, or if required, use the number keys to type in new values.
12.4
D
ISH
I
NSTALLATION
M
ENU
This is where the set top box is configured according to your satellite options. In most cases, no changes are required to this menu. However, if an old LNB is used then most likely the
LNB frequency value should be set to 11300. (11300 is the most common alternate frequency, but this frequency value is dependent on the LNB used)
©
Copyright 2012 Altech UEC (Pty) Ltd
23 | P a g e
12.5
12.5.1
12.5.2
12.5.3
12.5.4
12.5.5
12.5.6
12.5.7
T
O CONFIGURE THE
LNB
Launch the menu
Press the right button to move to the sub menu
Press the down button to move to the LNB Frequency option
Press OK to edit the number
Type in the new LNB frequency
Press OK to save the change setting.
To return to the main menu press left arrow or EXIT of the remote
.
12.6
12.6.1
T
O
R
ESCAN
When the “Dish Installation” menu is on screen, you can press the green button as a hot key to rescan the set top box.
12.7
TV I
NSTALLATION
This is where the set top box is configured to work with your television or home theater
©
Copyright 2012 Altech UEC (Pty) Ltd
24 | P a g e
12.7.1
12.7.2
The aspect Ratio settings may also be changed by pressing the 16:9/4:3 button while watching TV. Changing the aspect ratio using the remote key will not change the setting in the menu, and will not remain if the decoder requires a reboot. For a permanent setting, change the aspect ratio in the menu.
Digital audio should only be changed to Dolby when used in conjunction with a
Dolby decoder (e.g. Home theatre amplifier)
12.8
U
SER
S
ETTINGS
The User settings menu contains customizable settings to configure the set top box.
12.9
12.9.1
12.9.2
12.9.3
T
IME ZONE
Move the highlight onto the Time Zone setting by pressing right
Press OK to edit the Time Zone
Use the left and right arrow keys to select the correct time zone
25 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
12.9.4
12.9.5
Press OK when the correct one has been selected
Press EXIT or right arrow to return to the main menu section.
12.10
12.10.1
R
ESET TO FACTORY DEFAULTS
Selecting Reset to factory defaults will erase all the changes made to the menu.
12.10.2
12.10.3
Enter the pin (1234) by pressing the number keys on the remote.
The set top box will reboot after a factory reset.
12.11
12.11.1
USB U
PGRADE
Copy the upgrade image to a USB stick which is available for download from our website through this link: www.uec.com.au/downloads. The software upgrade filename is "upgrade.uec". Download the corresponding upgrade instruction for your reference.
26 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
12.12
I
NFORMATION
The information section contains the information for the set top box and smart card.
©
Copyright 2012 Altech UEC (Pty) Ltd
27 | P a g e
12.13
P
ARENTAL
C
ONTROL
The parental control menu is used to block certain age programs from being viewed without first entering a pin.
12.13.1
12.13.2
To make changes to this menu, press right to navigate to the Parental Level option.
The set top box will request the parental pin. The default parental pin is 1234.
©
Copyright 2012 Altech UEC (Pty) Ltd
28 | P a g e
12.14
12.14.1
12.14.2
C
HANGE
P
ARENTAL
P
IN
The default parental pin can be changed to another pin value.
The pin will be reset back to the default if a “reset to factory defaults” is performed.
©
Copyright 2012 Altech UEC (Pty) Ltd
29 | P a g e
12.15
PVR S
ETTINGS
There are a number of configurable options on the PVR.
12.16
12.16.1
T
IME
-
SHIFT
O
PTION
These options are discussed more in the Time-shift section, but allows for constant on demand time shifting
12.17
12.17.1
12.17.2
12.17.3
R
ECORDING
O
FFSETS
Programs tend to run past the times listed in the TV Guide due to inaccuracies in the broadcast information, this is controlled by the broadcaster.
The Record Start Offset adds extra time to the start of a recording. (E.g. if a program starts at 10:00am and the Start Offset is set to 5 minutes, the recording will start at 9:55am)
The Record Stop Offset adds extra time to the end of a recording. (E.g. if a program ends at 11:00am and the Stop Offset is set to 10 minutes, the recording
30 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
12.17.4 will stop at 11:10am
Note that these offsets will be automatically adjusted if two recordings are scheduled to record one after the other.
12.18
12.18.1
12.18.2
J
UMP
S
ETTINGS
Pressing Jump Back button by the period of time set in the “Jump backward” setting.
Pressing jump forward button will jump forward by the period of time set in the
“Jump Forward” setting.
12.19
CHAIN RECORD
IMPORTANT: Chain Record must be set to Current channel in order to successfully chain record a program (assuming that there are no recording conflicts during the time of recording).
Chain Record will not work if this is set to All Channels.
12.20
12.20.1
12.20.2
12.20.3
F
ORMAT
H
ARD
D
RIVE
Format hard drive will erase all recorded programs stored on the hard drive and should only be performed if absolutely essential.
To format the hard drive, press the GREEN button or press OK when Format
Hard Drive is highlighted.
The following popup will be displayed
.
12.20.4 Press OK to format the hard drive.
©
Copyright 2012 Altech UEC (Pty) Ltd
31 | P a g e
12.21
12.21.1
12.21.2
H
ARD
D
RIVE
I
NFORMATION
Hard drive information provides statistics on the hard drive recordings and amount of space available.
Press YELLOW button or OK when Hard Drive Information is highlighted to display hard drive information. A similar screen will be displayed
.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
©
Copyright 2012 Altech UEC (Pty) Ltd
32 | P a g e
13 RECORDING MODES
There are a number of ways to schedule a recording:
13.1
13.1.1
13.1.2
13.1.3
I
NSTANT RECORD
If you want to record the program you are currently watching, press the record button on the remote control.
A record start icon will appear, a red dot will appear in the I-plate and a small recording information popup is displayed above the I-plate on the right hand side of the screen indicating the details of the event that is recording.
A maximum of two events may be recorded at any time hence there may be two recording information popups displayed over the iplate.
©
Copyright 2012 Altech UEC (Pty) Ltd
33 | P a g e
13.2
13.2.1
13.2.2
13.2.3
TV G
UIDE
(EPG)
RECORD
Scroll in the TV Guide to highlight the program you would like to record, then press the record button.
A red dot will appear in front of the highlighted program and in the event information screen indicating that recording is scheduled.
A maximum of two events may be recorded at any time. In the event a third concurrent recording is attempted a recording conflict screen is displayed.
13.3
13.3.1
13.3.2
13.3.3
C
HAIN
R
ECORD
(EPISODE
CHAIN
RECORDING)
If you would like to record more programs of the same name, a chain recording can be set.
Press the yellow button on the program in the TV guide to make the yellow chain icon appear.
These chain events are only recorded if there is a spare tuner available and no conflicts checking is done on other chain events.
34 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
13.3.4 NOTE: Chain recordings are not checked for conflicts. The program will be recorded if there is a tuner free. If you want to make sure that a recording happens, schedule a normal single recording by pressing the record button.
13.4
13.4.1
13.4.2
13.4.3
13.4.4
T
IMEBASED RECORD
A Timebased recording can be scheduled, where you manually set the recording name, channel, start date, start time, duration, recording days and parental guidance setting.
A Timebased recording will appear as a single recording in the playlist, even if the duration spans multiple programs, and the individual program information within the recording cannot be accessed.
Because individual program information cannot be accessed, an overall parental block setting for the recording can be set. Choosing Parental Setting “ON” means the Parental guidance pin will need to be entered before the playback can start.
The maximum duration of a time based recording is 24 hours.
35 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
13.5
13.5.1
13.5.2
T
O SCHEDULE A
T
IME BASED RECORDING
:
Press the PVR button while watching TV or listening to the radio.
Scroll to the Scheduled List icon and press OK to launch the Scheduled List screen
.
13.5.3
13.5.4
Press the “R” (Record) button on the remote control to add a Time based recording (timed event)
The following screen will appear:
©
Copyright 2012 Altech UEC (Pty) Ltd
36 | P a g e
13.5.5
13.5.6
13.5.7
13.5.8
13.5.9
13.5.10
13.5.11
13.5.12
13.5.13
Press OK on a field to edit it.
When editing Recording Name, use left arrow and right arrow to move the highlight to letter in name that you want to change. Use up arrow and down arrow to change the highlighted character. Characters available are
“ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789”. (For example, when “T” is highlighted and up arrow is pressed then “S” is displayed. When “T” is highlighted and down arrow is pressed then “U” is displayed.)
When editing Channel and Parental Setting use left and right arrows to select the desired values.
When editing Date, time or duration, use the left arrow to delete characters.
Press “0”..”9” on the remote to enter new time values.
When editing
Recording Days, pressing “OK will launch the day selection popup.
Press OK on “Confirm and schedule recording” to save the entered parameters and schedule the recording.
A chain with the recording name will appear in the Scheduled List.
An event scheduled to be recorded for the day with the recording name and a unique number will appear in the Scheduled List.
If you have problems scheduling the recording, please see the troubleshooting section of this user manual
.
14 CONFLICTS
14.1
14.1.1
14.1.2
2 R
ECORDINGS AT A
T
IME
M
AXIMUM
This set top box can record only two channels at a time.
If you try to record 3 programs that overlap on different channels, a message will inform you that there is a conflict. (Expect for chain recordings which do not have conflict checking)
37 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
15 T
IME SHIFTING
The Time-shift options can be configured in the menu.
15.1
15.1.1
15.1.2
15.1.3
15.1.4
O
N
P
AUSE
If you press pause while watching live TV, the program will pause until a later time when you can resume viewing.
To resume viewing, press the play/pause button again.
As soon as the set top box is paused, programs are added to the Time-shift list.
The pause buffer will be reset after 24 hours
15.2
15.2.1
15.2.2
15.2.3
A
LWAYS
O
N
The set top box will continually record the program that is currently on live to the hard drive when “always on” is selected.
The programs can be viewed in the Time-shift list. All programs in the Time-shift list will be deleted as the drive gets full.
To save the program to the playlist (so it won’t be automatically deleted), press the green button to “copy to the playlist” in the Time-shift list screen.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
38 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
15.3
15.3.1
V
IEWING
P
AUSE
B
UFFER AND
R
ECORDING
If you are watching behind live press the record button, a popup will appear informing that you are behind live and all of the event that is in the Time-shift list will be moved to the playlist.
©
Copyright 2012 Altech UEC (Pty) Ltd
39 | P a g e
16 P
LAYLIST
16.1
16.1.1
16.1.2
P
LAYBACK
The playlist contains a list of recorded programs
The maximum of 1000 recorded programs are allowed in the playlist.
16.1.3
16.1.4
16.1.5
16.1.6
To display the playlist press PVR while watching TV or listening to the radio.
Select Playlist and press OK.
Use the up and down arrow keys to move through the recorded programs.
Press OK on a program to start it playing back.
40 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
16.2
16.2.1
D
ELETE
E
VENT
Programs can be deleted from the playlist by pressing the red button on the selected program.
16.3
16.3.1
16.3.2
16.3.3
S
ORTING
The playlist is sorted with the newest recorded programs at the beginning of the list.
To sort the list in alphabetical order, press the yellow button.
To sort the list according to start time, press the yellow button again.
16.4
16.4.1
16.4.2
16.4.3
G
ROUPING
The playlist can be grouped according to name or per month.
Press the blue button to group the items and another time to ungroup them.
When the playlist is in the grouped mode, it can still be sorted by name or date by pressing the yellow button.
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
41 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
17 S
CHEDULED
L
IST
17.1
17.1.1
17.1.2
V
IEWING
The scheduled list contains a list of programs that will be recorded in the future.
A maximum of 200 programs can be scheduled for recording at one time.
17.1.3
17.1.4
17.1.5
To display the playlist press PVR while watching TV or listening to the radio.
Select Scheduled and press OK.
Use the up and down arrow keys to move through the list.
17.2
17.2.1
D
ELETE
E
VENT
Programs can be deleted by pressing the red button on the selected program.
17.3
17.3.1
17.3.2
S
ORTING
To sort the list in alphabetical order, press the yellow button.
To sort the list according to recording start time, press the yellow button again.
42 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
17.4
17.4.1
17.4.2
17.4.3
G
ROUPING
The scheduled list can be grouped according to name or per month.
Press the blue button to group the items and another time to ungroup them.
When the scheduled list is in the grouped mode, it can still be sorted by name or date by pressing the yellow button.
17.5
17.5.1
T
IMEBASED
R
ECORDING
Timebased recordings can be set up from this screen. Please see the
“Timebased record” section of this manual for more info.
18 T
IME
-
SHIFT
L
IST
18.1
18.1.1
18.1.2
V
IEWING
The Time-shift list contains a list of programs that have been automatically recorded
These items will be automatically deleted as the hard drive gets full.
18.2
18.2.1
S
AVING
T
IME
-
SHIFT
P
ROGRAMS
To save the program to the playlist (so it won’t be automatically deleted), press the green button to “copy to the playlist” in the time shift list screen
18.3
18.3.1
D
ELETE
E
VENT
Programs can be deleted by pressing the red button on the selected program.
18.4
18.4.1
18.4.2
S
ORTING
To sort the list in alphabetical order, press the yellow button.
To sort the list according to recording start time, press the yellow button again.
43 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
18.5
18.5.1
18.5.2
18.5.3
G
ROUPING
The Time-shift list can be grouped according to name or per month.
Press the blue button to group the items and another time to ungroup them.
When the Time-shift list is in the grouped mode, it can still be sorted by name or date by pressing the yellow button.
19 E
THERNET
Ethernet functionality is planned for future support. New user manuals will be available on the website when this feature becomes available.
20 MHEG-5
20.1
N
OTE
: A
POTENTIAL APPLICATION THAT MAYBE AVAILABLE ON THE PLATFORM
21 T
ROUBLESHOOTING
Note: A comprehensive troubleshooting help screen can be viewed at any time by pressing the “HELP” button on the remote control.
21.1
21.1.1
21.1.2
21.1.3
21.1.4
21.1.5
H
ARD
D
RIVE IS
F
ULL
There is no more space on the hard drive for new recordings; you will need to delete some recordings.
To delete recorded programs: Press the PVR button
Press OK on the Playlist icon to launch the playlist.
Scroll to a program you wish to delete.
Press the red button to delete, and then OK to confirm
.
44 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
21.2
21.2.1
21.2.2
21.2.3
T
IME BASED
R
ECORDING
W
ON
’
T
S
CHEDULE
B
ECAUSE
O
F
I
NVALID
V
ALUES
Please check that the date you have entered is in YYYY-MM-DD format, and the time/duration is in the HH:MM format.
Please check that the date and time are not in the past.
The maximum recording duration for Time based recordings is 24 hours, please ensure that the duration is shorter than “24:00”
21.3
21.3.1
M
Y
C
HAIN
R
ECORDING
D
OESN
’
T
R
ECORD
If a chain recording didn’t record then there were probably already 2 recordings in progress. To make sure a program records, set up the recording as a normal single recording.
©
Copyright 2012 Altech UEC (Pty) Ltd
45 | P a g e
22 F
REQUENTLY
A
SKED
Q
UESTIONS
22.1
22.1.1
22.1.2
H
OW
M
ANY
H
OURS
C
AN
I R
ECORD
?
The PVR Info screen shows the approximate number of hours of recording space remaining on the connected hard drive.
These estimates are not exact. The actual recording time will depend on the broadcast quality of the programs being recorded.
22.2
22.2.1
22.2.2
22.2.3
22.2.4
22.2.5
H
OW
D
O
I E
RASE
A
LL
T
HE
P
ROGRAMS
I
N
T
HE
P
LAYLIST
?
It is possible to erase all programs by formatting the hard drive.
Launch the PVR Setup menu and press OK on Hard drive format.
Press OK to confirm the format.
The format will take a few minutes to complete.
When the format is complete, the HDD status on the screen should say
“Connected and working”, and the Playlist will be empty.
22.3
22.3.1
C
AN
I V
IEW
S
UBTITLES
O
N
A P
LAYBACK
?
To turn on subtitles, press the “CC” closed caption button on the remote during playback of a pre-recorded program.
46 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
LEGAL MATTERS
Importa nt NOTICE to a ll purcha s e rs of a DS R4639 De code r.
INTRODUCTION
The DS R4639 de code r is de s igne d, ma nufa cture d a nd s old to re ce ive s e le cte d ne twork s e rvice s only. It will the re fore not be fully functiona l unle s s it is us e d with the ne twork ope ra tor's e na ble d S ma rtca rd s upplie d with the DS R4639 de code r, de ploye d within the Aus tra lia n VAS T broa dca s t footprint, a nd ins ta lle d s o a s to re ce ive the ne twork s pe cific s igna l.
The ne twork ope ra tor is e ntitle d to a me nd the s oftwa re incorpora te d in the DS R46 39 De code r from time to time by me a ns of s oftwa re downloa ds for a numbe r of re a s ons , including pre ve nting the DS R4639 De code r from be ing us e d to re ce ive s e rvice s othe r tha n the ne twork ope ra tor s e rvice s .
DIY INSTALLATIONS DISCLAIMER
Due to the ma ny pote ntia l configura tions in e a ch home a nd the va rie ty of e quipme nt a va ila ble , it is not pos s ible to cove r e ve ry pote ntia l ins ta lla tion s ce na rio in this Vie we r's Guide . An Accre dite d Ins ta lle r or the s upplie r / ma nufa cture r of the s pe cific e quipme nt s hould be cons ulte d if a ny doubt e xis ts whe n doing a n ins ta lla tion.
ROVI
This product incorpora te s copyright prote ction te chnology tha t is prote cte d by U. S . pa te nts a nd othe r inte lle ctua l prope rty rights . Us e of this copyright prote ction te chnology mus t be a uthoris e d by Rovi
Corpora tion, a nd is inte nde d for home a nd othe r limite d vie wing us e s only unle s s othe rwis e a uthoris e d by
Rovi. Re ve rs e e ngine e ring or dis a s s e mbly is prohibite d.
ALTECH UEC
Alte ch UEC a nd the ir logo a re tra de ma rks a nd / or re gis te re d tra de ma rks of Alte ch UEC.
DOLBY
Ma nufa cture d unde r lice ns e from Dolby La bora torie s . Dolby a nd the double -D s ymbol a re tra de ma rks of
Dolby La bora torie s .
DVB (DIGITAL VIDEO BROADCASTING)
DVB is a re gis te re d tra de ma rk of the DVB P roje ct.
INTELLECTUAL PROPERTY
The whole of the DS R4639 Ins truction Ma nua l, including the gra phics , me nus a nd informa tion conta ine d he re in a re the s ubje ct of inte lle ctua l prope rty rights , including copyright, unde r dome s tic la w a nd inte rna tiona l conve ntions . All rights a re re s e rve d. All inte lle ctua l prope rty rights of the DS R4639 De code r a re owne d by Alte ch UEC. Ha cking of the conditiona l a cce s s s ys te m or fa cilita ting a nyone e ls e doing s o is
S TRICTLY P ROHIBITED. Fa ilure to a dhe re to this prohibition is a crimina l offe nce .
S ome compone nts a re lice ns e d unde r GP L a nd LGP L lice ns e s . For furthe r informa tion re ga rding the lice ns e s a nd which compone nts a re lice ns e d unde r the s e lice ns e s ple a s e vis it http://www.ue c.com.a u.
The s ource code for the s e compone nts ca n be obta ine d by writte n re que s t to:
The UEC DS R4639 OP T te a m,
Alte ch UEC (P TY) LTD
UEC Hous e
1 Montgome ry Drive
Mount Edge combe
4300
S outh Africa
P le a s e note tha t the re is a fe e a s s ocia te d with the writte n re que s t to cove r s hipping, ha ndling, proce s s ing a nd the cos t of me dia . Alte ch UEC re s e rve s the right to e xclude or include GP L/LGP L compone nts from its products a s it s e e s fit.
47 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
OBSOLESCENCE DISCLAIMER
Digita l S a te llite Te chnology is ra pidly e volving. As a re s ult of this , it is not pos s ible to pre dict wha t the re quire me nts will be in a fe w ye a rs ' time . The ma nufa cture r ca nnot gua ra nte e tha t this DS R4639 De code r will be a ble to run a ll a va ila ble s e rvice s in future .
FOR YOUR RECORDS
We re comme nd you comple te the following informa tion for your re cords :
P roduct Mode l:____________________________________
S e ria l Numbe r:____________________________________
P urcha s e r's Na me :__________________________________
P urcha s e r's Addre s s :________________________________
_________________________________________________
Authoris e d De a le r's Na me :___________________________
Da te of P urcha s e :_________________________________
HELP AND INFORMATION
WEBSITES
Digita l TV from S a te llite www.mys a ttv.com.a u --- Cove ra ge a nd a ctiva tions
Ma nufa cture r (Alte ch UEC) www.ue c.com.a u
Information on VAST www.vastdigital.com.au
F
OR ASSISTANCE EMAIL
-
SUPPORT
@
UEC
.
COM
.
AU
TELEPHONE
Alte ch UEC Aus tra lia +61 2 94255777
VAS T 1300 99 3376 (S ma rt Ca rd Activa tions )
©
Copyright 2012 Altech UEC (Pty) Ltd
48 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
49 | P a g e
Altech UEC Pty Ltd
Level 2, 27 Sirius Rd,
Lane Cove West, NSW 2066,
Sydney, Australia
The latest version of this user manual can be downloaded at
www.uec.com.au
©
Copyright 2012 Altech UEC (Pty) Ltd
50 | P a g e
advertisement
Related manuals
advertisement