R
Driving Knowledge Creation
Cynap PRO
Quick Start Guide
vSolution Cynap PRO by WolfVision - Classic Mode
Introduction
Cynap PRO by WolfVision® delivers an all-in-one collaboration and presentation solution,
featuring BYOD, BYOM, streaming to vSolution Cynap systems, web conferencing, and a
document and media player, with support for up to 4K UHD resolution.
Hardware Connection
Make all necessary connections according to the following typical illustration.
Plug in the power cord as the last step.
Power on the equipment.
Typical Setup
Input sources
Output
Control
Touch display,
app, web browser,
HDMI Out
4 simultaneous
BYOD wireless devices
Touch display
Audio out
USB drive, UVC, UAC
Zoom, Teams,
WebRTC
web conferencing
2x HDMI device
MATRIX
Networked AV solutions
MATRIX
Networked AV solutions
Color key
IP-Streams
HDMI
Cloud services
Network drives
Web browser
USB
LAN
Audio
Connect and Control - Classic Mode
Operating for the first time
When the Cynap system is switched on, all settings can be configured in the passwordprotected settings section of the graphical user interface (GUI). Access the GUI by using a web
browser on your connected PC or tablet (input the IP address), by using the remote control*, or
by using a connected USB mouse and keyboard.
Push the
button on the right-hand edge to open the Control center and click on the
cogwheel.
Cynap PRO
Setup
Initial admin password to access the settings: Password
Initial SSID of built-in Access Point: model name + serial number of the unit
Initial password of built-in Access Point: serial number of the unit (8 digits)
Check the integrated Help Guide for further details.
* This Cynap PRO system is not automatically supplied with a remote control. If you wish to use the remote
control, please check our homepage, or use the direct link https://bit.ly/3RoAH9I for further details.
vSolution Cynap PRO by WolfVision - Composer Mode
Introduction
Cynap PRO by WolfVision® delivers an all-in-one collaboration and presentation solution,
featuring BYOD, BYOM, streaming to vSolution Cynap systems, web conferencing, and a
document and media player, with support for up to 4K UHD resolution.
Hardware Connection
Make all necessary connections according to the following typical illustration.
Plug in the power cord as the last step.
Power on the equipment.
Typical Setup
Input sources
Output
Control
Touch display,
app, web browser,
4 simultaneous
BYOD wireless devices
HDMI Out left
Touch display
HDMI Out right
USB drive, UVC, UAC
Audio out
Zoom, Teams,
WebRTC
web conferencing
2x HDMI device
MATRIX
MATRIX
Networked AV solutions
Networked AV solutions
IP-Streams
Color key
HDMI
USB
LAN
Audio
Cloud services
Note
Network drives
Web browser
Control Output is disabled by default and has to be
activated in the settings / General by enabling the
Composer Mode.
Connect and Control - Composer Mode
Composer Mode already activated in the settings
When the Cynap system is switched on, all settings can be configured in the passwordprotected settings section of the graphical user interface (GUI). Access the GUI by using a web
browser on your connected PC or tablet (input the IP address), by using the remote control*, or
by using a connected USB mouse and keyboard.
Push the
button on the right-hand edge to open the Control center and click on the
cogwheel.
Cynap PRO
Setup
Initial admin password to access the settings: Password
Initial SSID of built-in Access Point: model name + serial number of the unit
Initial password of built-in Access Point: serial number of the unit (8 digits)
Check the integrated Help Guide for further details.
* This Cynap PRO system is not automatically supplied with a remote control. If you wish to use the remote
control, please check our homepage, or use the direct link https://bit.ly/3RoAH9I for further details.
Miracast on Windows 8.1+ (Wireless Display)
+ K to list local Miracast receivers.
Miracast 1. Press
2. Select your Cynap system from the list.
on Windows 3. Activate User Input Back Channel on the Windows device to allow touch
back control of it via Cynap system connected touch screen.
Miracast on Android
Miracast 1. Swipe down to Open Quick Settings.
2. Select Miracast (aka: Screen Mirroring, Cast, Smart View, AllShare).
on Android 3. Select your Cynap system from the list.
AirPlay on MacBook, iMac
AirPlay 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on macOS 2. Click
in the menu bar at the top of your screen.
3. Select your Cynap system from the list.
AirPlay on iPhone / iPad
AirPlay 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on iOS / iPadOS 2. Swipe down to open Control Center and tap on Screen Mirroring.
3. Select your Cynap system from the list.
Chromecast on Chromebrowser
Chromecast 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on Windows, 2. Open your Chrome browser, start Cast and select the source content.
MacOS and Linux 4. Select your Cynap system from the list.
Chromecast on Android
Chromecast 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on Android 2. Swipe down to open Quick Settings and select Screen Mirroring.
3. Select your Cynap system from the list.
vSolution Cast on Windows
vSolution Cast 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on Windows 2. Start vSolution Cast.
3. Select your Cynap system from the list.
vSolution App on iPhone / iPad
vSolution App 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on iOS / iPadOS 2. Select your Cynap system from the list.
3. Control your Cynap system.
vSolution App on Android
vSolution App 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on Android 2. Select your Cynap system from the list.
3. Share your content.
4. Control your Cynap system.
vSolution App on MacBook, iMac
vSolution App 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on macOS 2. Select your Cynap system from the list.
3. Share your content.
4. Use Room Audio/Video.
5. Control your Cynap system.
vSolution App on Windows
vSolution App 1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
on iOS 2. Select your Cynap system from the list.
3. Share your content.
4. Use Room Audio/Video.
5. Control your Cynap system.
Firewall and Network settings
Make sure that all firewall rules are adhered. Check the Network Integration Guide for further
details.
Depending on service used, the unit has to be registered at you DNS server.
R
Driving Knowledge Creation
Manufacturer / Worldwide Distribution
WolfVision GmbH
A-6833 Klaus
AUSTRIA
www.wolfvision.com
E-Mail: [email protected] / [email protected]
International Distribution Offices
USA
WolfVision Inc.
E-Mail: [email protected] / [email protected]
Asia
WolfVision Pte Ltd
E-mail: [email protected]
Middle East
WolfVision Representation Office Middle East
E-Mail: [email protected]
Germany
WolfVision Germany
E-mail: [email protected]
Northern Europe
WolfVision Nordic
E-mail: [email protected]
Japan
WolfVision Co. Ltd.
E-mail: [email protected]
United Kingdom
WolfVision UK Ltd.
E-Mail: [email protected]
Printed in Austria - April 2024
">
