advertisement
LINE ARRAY SPEAKER
SYSTEMS
TYPE H
Slim Line Array Speakers with Clear,
Well-focused Sound Enhancement
Slim and stylish TOA Type H Line high-quality audio for a wide ven
SR- H2L SR- H2S
SR- H3L
84mm
SR- H2S
Line Array Speaker Standard Speaker
SR- H2L
SR- H3L SR- H3S
e Array Speakers ensure cost-efficient, nue and decor range.
84mm
TOA Type H Line Array Speakers come with such soundenhancing benefits as clear sound, excellent directionality of focus on the listening area, and transmission of clear, even sound over a distance, thanks to a low degree of sound attenuation.
These speakers are well-suited for medium-sized mainly speech applications where clear, uniformly dispersed sound that is audible at a distance is essential, such as conference centers, houses of worship and railway stations, or venues with highly reflective interior surfaces.
The Type H consists of four models, in short or long lengths and straight or curved variations. The short models contain 9 vertically connected 7-cm (2.8") fullrange speaker units, while the taller long models come with 16 speaker units. Both lengths work to provide highquality sound even when an equalizer is not used.
The speaker units come in a slim, energy-efficient and cost-effective design, with a body that is narrower than earlier versions, so they are well-suited to a wide range of venue interiors.
Outstanding Sound Quality
• Sync-Drive (Synchronous Nexus Control) technology keeps the audio in phase with its sources at the speakers to create an ideal linear sound source.
• Line array configuration of speakers works to produce clear sound with reduced attenuation over distance.
• Speakers are reflection-free and feedback resistant.
• A unique aperture front grille structure enhances the horizontal frequency vs. beam width response for more focused horizontal dispersion.
• Speakers are designed for optimally precise directivity of sound, especially vertical directivity, so the audio dispersion can be more accurately focused at the targeted area.
• Curved speaker models rely on a hyper-clothoid concept curved array that ensures improved vertical dispersion.
Application Versatility
• Selection among four models is possible, enabling more extensive customization of the listening area.
• Most applications are fully covered by no-extension
(one cabinet) set-ups, but up to two units can be connected when an expanded vertical coverage area is suitable.
*Straight type only
• Attractive and narrow 84mm (3.31") design allows speakers to fit in well with the interior decor of the venue.
• Optionally available mounting brackets allow gap-free installation of speakers on a wall, for an aesthetically pleasing appearance.
Space/Energy Efficient Design
• Energy-efficient line array configuration requires less input power to deliver required output.
• High-quality sound reproduction even when an equalizer is not used.
(In some situations, equalization using a digital processor is recommended, so
that Type H can best meet the specific demands of that application.)
• Fully effective operation is possible without additional amplification equipment, saving space and adding to the unit's cost effectiveness.
Easy & Flexible Installation
• A wide variety of optional mounting brackets is available, for wall-mounting, rigging, and stand mounting the
Type H speakers.
• Removable input terminal connectors make hook-ups easier and less cumbersome.
• For high-impedance operation, an optional matching transformer MT-S0301 is available.
For Applications Requiring
Water-proof or
2-way Speaker Models
Type S Line Array Speaker
TOA Type S Line Array Speakers are 2-way line array speaker models, each with 8
10-cm (4") woofers and 24 high-frequency drivers, installed vertically to create a continuous linear sound source that resists attenuation over distance.
TOA created Type S Line Array speakers for use in larger venues where clear sound needs to be carried over a long distance.
The Type S speaker lineup also includes a waterproof model, to enable a wider range of applications.
SR-S4L/S4LWP
SR-S4S/S4SWP
TOA makes both Type S and Type H speaker lineups available, to allow users to select the speaker model that best suits their particular application requirements.
SPECIFICATIONS
TYPE H
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity
Frequency Response
Directivity Angle
Speaker Component
Input Connector
Finish Enclosure:
Front grille:
Dimensions
Weight
Options
SR -H2L SR -H2S SR -H3L SR-H3S
Bass-reflex type
Continuous program: 180W
92dB
(1W, 1m equivalent, measured at 4m)
90dB
(1W, 1m equivalent, measured at 4m)
Continuous program: 360W
8 Ω
95dB
(1W, 1m equivalent, measured at 8m)
92dB
(1W, 1m equivalent, measured at 8m)
80 – 18,000Hz (-10dB) 90 – 17,000Hz (-10dB) 110 – 18,000Hz (-10dB) 90 – 17,000Hz (-10dB)
(when equalized at recommended parameters) (when equalized at recommended parameters) (when equalized at recommended parameters) (when equalized at recommended parameters)
Horizontal: 90 °
Vertical: 0 °
(within the range of speaker height)
Horizontal: 90
Vertical: 20
7cm (2.8") cone-type × 9
°
° Horizontal: 90 °
Vertical: 0 °
(within the range of speaker height)
Horizontal: 90
Vertical: 20
7cm (2.8") cone-type × 16
°
°
Removable input connector
84 (W) × 668.4 (H) × 115 (D)mm
(3.31" x 26.31" x 4.53")
4.4kg (9.7 lb)
MDF, white, urethane paint
Punched steel plate, white, acrylic paint
84 (W) × 663.4 (H) × 115 (D)mm
(3.31" x 26.12" x 4.53")
84 (W) × 1186.4 (H) × 115 (D)mm
(3.31" x 46.71" x 4.53")
4.2kg (9.26 lb) 7.6kg (16.75 lb)
84 (W) × 1177.2 (H) × 157 (D)mm
(3.31" x 46.35" x 6.18")
7.9kg (17.42 lb)
Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3,
Matching transformer: MT-S0301, Digital processor: DP-0206
OPTIONAL ACCESSORIES
SR-EP3
Extension Plate
SR-WB3
Wall Mounting Bracket
SR-TB3
Wall Tilt Bracket
SR-FB3
Flying Bracket
SR-SA3
Stand Adapter
MT-S0301
Matching Transformer
SR-EP3
Extension
Plate
SR-WB3
Wall Mounting
Bracket
SR-TB3
Wall Tilt
Bracket
SR-FB3
Flying
Bracket
SR-SA3
Stand
Adapter
TYPE S SPECIFICATIONS
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity (1W, 1m)
Frequency Response
SR - S4L SR - S4LWP
Bass-reflex type Sealed type
94dB
SR - S4S
Bass-reflex type
70 – 20,000Hz (-10dB) (when equalized at recommended parameters)
Sealed type
Continuous program: 600W (single amp mode) / Low 240W, High 240W (biamp mode)
8 Ω (single amp mode) / Low 8Ω, High 8Ω (biamp mode)
93dB
SR-S4SWP
Crossover Frequency
Directivity Angle
Speaker Component
3,500Hz
Horizontal: 90 °
Vertical: 0 ° (within the range of speaker height)
Low frequency: 10cm (4") cone-type × 8
High frequency: 2.5cm (1") balanced dome-type × 24
IPX4 —
Horizontal: 90
Vertical: 10 °
°
Dust/Water Protection
Finish
Dimensions
Weight
Enclosure:
—
MDF, white, paint Plywood, white, urethane coating
Front grille: Punched steel plate, white, acrylic paint Punched stainless steel, white, paint
160 (W) × 895 (H) × 255 (D)mm (6.30" × 35.24" × 10.04")
MDF, white, paint
IPX4
Punched steel plate, white, acrylic paint Punched stainless steel, white, paint
16kg (35.27 lb)
160 (W)
Plywood, white, urethane coating
× 892 (H) × 303 (D)mm (6.30" × 35.12" × 11.93")
Human Society with
Sound & Communication
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
Printed in Japan (0809) 833-52-391-20 u
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project