6
Set Up for Fax Reception
If you are not using the machine as a fax, go to "7 Confirming Your Connection Type" on page 13.
Select a receive mode according to your needs to receive faxes easily.
You can change the receive mode any time. For details, refer to the on-screen manual:
Basic Guide
.
When using as a fax only:
When you want to receive only faxes
(FAX only mode)
When a call arrives:
Voice call:
You cannot answer the call.
When you want to switch the line between fax and telephone automatically
(FAX priority mode)
When a call arrives:
When using as both a fax and telephone:
When you receive more voice calls than faxes (TEL priority mode)
When a call arrives:
If you use a call ring pattern detection service (DRPD/Network Switch)
When a call arrives:
Voice call:
The machine rings.
Pick up the handset to answer the call.
It may take a while before the ringtone sounds.
Voice call:
Pick up the handset to answer the call.
Voice call:
The telephone continues to ring.
Pick up the handset to answer the call.
Fax call:
The machine does not ring.
Faxes are received automatically.
Fax call:
The machine does not ring.
Faxes are received automatically.
Fax call:
If you pick up the handset and hear the fax tone, the machine will switch to the fax automatically and receive the fax.
Fax call:
Faxes are received automatically when the machine detects the fax ring pattern.
• When a telephone is connected to the machine, the telephone rings for incoming calls depending on the selected mode.
• This service may not be available depending on the country or region of use.
1
6
2 3
D
B
C
A
Press the
FAX
button (A), then press the
Menu
button (B).
The
FAX menu
screen is displayed.
Press the
OK
button.
The
Receive mode settings
screen is displayed.
Use the
{
or
}
button (C) to select a receive mode, then press the
OK
button. When the FAX menu returns, press the
Back
button (D).
The selected receive mode is displayed.