Loading Paper. Canon PIXMA MX860 series

24

Loading Paper

1

This section explains how to load paper in the Cassette (A) and the Rear Tray (B).

D

B

Load in the Cassette

A

A

Pull out the Cassette (A).

C

The Cassette (A) supports plain paper (C) only.

To print photo paper / Hagaki (D), be sure to load it in the Rear Tray (B).

2

F

3

E

Move the Paper Guides (E) and

(F) to both edges.

Load paper.

Load paper with the printing side facing down.

4

24

E

5 6

F

A

G

Slide the Paper Guide (E) to align with the mark of paper size.

The Paper Guide (E) will stop when it aligns with the corresponding mark of paper size.

Slide the Paper Guide (F) against left edge of the paper.

Confirm that the loaded paper does not exceed the line (G).

Insert the Cassette (A) into the machine until it clicks into place.

• There may be a little space between the Paper Guide (E) and the paper stack.

• To print on specialty paper, be sure to load it in the Rear Tray.

7

Load paper in the Rear Tray

8 9 10

H

Open the Paper Support (H) and pull it out.

I I

Move the Paper Guides (I) to both edges.

J

Load paper in the center of the Rear

Tray.

Load paper in portrait orientation with the printing side facing up.

I

I

Slide the left and right Paper Guides

(I) against both edges of the paper.

Confirm that the loaded paper does not exceed the line (J).

• For details on media sizes and types you can use, refer to "Loading Paper" in the on-screen manual:

Basic Guide

.

Machine installation is now complete!