Patricia C.
What size brads does the device accept?
This device accepts 18 Gauge 5/8″ – 2″ Brad nails.
The Central Pneumatic 64269 is a versatile 2-in-1 air nailer/stapler designed for various woodworking and construction projects. It drives 18 gauge brads from 5/8" to 2" and staples from 5/8" to 1-1/2" with a narrow crown. This tool features a single sequential actuation mechanism for precise fastener placement and a magazine window to monitor remaining fasteners. It operates at a maximum air pressure of 120 PSI and consumes 2.4 CFM at 90 PSI.
Advertisement
Advertisement
Advertisement
2-in-1 Nailer/Stapler
18 Gauge
5/8"-2" Brad Capacity
5/8"-1-1/2" Staple Capacity
Single Sequential Actuation
Magazine Window
120 PSI Max Pressure
2.4 CFM @ 90 PSI
The maximum air pressure for the Central Pneumatic 64269 is 120 PSI.
This tool can drive both 18 gauge brads and staples.
The maximum length for brads is 2" and for staples is 1-1/2".
What size brads does the device accept?
This device accepts 18 Gauge 5/8″ – 2″ Brad nails.
How should the tool be oiled and lubricated?
The tool should be oiled and lubricated as follows: 1. Air Inlet / Airline Connection (Regular Lubrication): If not using an automatic oiler, add a few drops of Pneumatic Tool Oil into the airline connection before use and a few more drops after each hour of continual use. 2. Internal Mechanism: Lubricate using only white lithium grease. 3. Drive Guide: Lightly oil the Drive Guide during maintenance or after clearing jams. Warning: To prevent explosions and tool damage, only use the specified lubricants.