Nylon Line Head Disassembly Instructions. Echo SRM-3020

SRM-3020

1.

Clean all loose debris from gear case.

2.

Remove plug (A) and check level of grease.

3.

Add grease if necessary. DO

NOT over-fill.

Drive Shaft (flex cable only)

1.

Loosen screw (B) and remove locating screw (C). Pull gear case and shield from drive shaft housing.

MAINTENANCE

A

B

C

2.

Pull flexible cable (D) from the drive shaft housing, wipe clean and re-coat with 15 ml (0.5 oz.) of grease.

3.

Slide the flexible cable (D) back in the drive housing. DO NOT get dirt on the flex cable.

4.

Install the gear housing and shield assembly.

D

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed

®

head disassembly is not necessary. However, if circumstances require disassembly, follow these instructions.

X7502350002

©

2/20

ECHO Incorporated

39