MAINTENANCE
SRM-3020T
3.
Remove foam pre-filter (B) and air filter and clean as indicated below:
4.
Foam Pre-filter.
B
• Clean foam filter in water/ detergent solution and rinse with clean water.
• Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry.
Allow to dry completely before reuse. Do not oil.
Air Filter
• Lightly brush debris from filter. Replace filter if it is damaged, fuel soaked, very dirty, or the rubber sealing edges are deformed.
5.
Assemble components in reverse order.
Assure air filter is assembled with pleats oriented vertically.
Fuel Filter
Level 1.
Parts Required: Tune Up Kit.
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.
34
X7502350102
©
2/20
ECHO Incorporated
