advertisement
3.8
Model Numbers
3.8.1 PULSAR Radar Transmitter
1
|
BASIC MODEL NUMBER AND OPERATING FREQUENCY
R96 Through-Air Radar Level Transmitter- 6 GHz Pulse Radar
4
|
POWER
5 24 VDC, Two-wire
5
|
SIGNAL OUTPUT
1 4–20 mA with HART
2 F
OUNDATION fieldbus
6
|
SAFETY OPTIONS
0
1
None (F
OUNDATION fieldbus only) (5th digit = 2)
SIL 2 Hardware - HART only (5th digit = 1)
7
|
ACCESSORIES
0 No Digital Display and Keypad
A Digital Display and Keypad
8
|
CLASSIFICATION
0 General Purpose, Weatherproof (IP 67)
A
B
C
1
3
Intrinsically Safe (FM & CSA)
Explosion-proof (FM & CSA)
Intrinsically Safe (ATEX/IEC)
Flame-proof (ATEX/IEC)
Non-sparking (ATEX)
9
|
HOUSING/CONDUIT CONNECTION
1 Die-cast Aluminum, Dual-compartment, 45-degree
2 Investment Cast, Stainless Steel, Dual-compartment, 45-degree
10
|
CONDUIT CONNECTION
2
3
0
1
1 ⁄
2
" NPT
M20
1 ⁄
2
" NPT with sunshade
M20 with sunshade
58
R 9 6 5
58-602 Pulsar
®
Model R96 Radar Transmitter
advertisement
Related manuals
advertisement
Table of contents
- 5 1.1 Getting Started
- 5 1.1.1 Equipment and Tools
- 6 1.1.2 Configuration Information
- 7 1.2 QuickStart Mounting
- 7 1.2.1 Antenna
- 7 1.2.2 Transmitter
- 8 1.3 QuickStart Wiring
- 8 1.4 QuickStart Configuration
- 10 1.4.1 QuickStart Menu Options
- 11 1.4.1.1 QuickStart Numerical Data Entry
- 12 2.1 Unpacking
- 13 2.3 Before You Begin
- 13 2.3.1 Site Preparation
- 13 2.3.2 Equipment and Tools
- 13 2.3.3 Operational Considerations
- 14 2.3.3.1 Maximum Distance
- 14 2.3.3.2 Minimum Distance
- 14 GWR Alternative
- 15 2.4 Mounting
- 15 2.4.1 Installing the Antenna
- 15 2.4.1.1 Location
- 15 2.4.1.2 Beam Angle
- 16 2.4.1.3 Obstructions
- 16 2.4.1.4 Nozzles
- 17 2.4.1.5 Standpipes and Stillwells
- 17 2.4.2 Installing the Transmitter
- 17 2.4.2.1 Orientation
- 18 2.4.2.2 Initial Installation
- 18 2.4.2.3 Low Echo Margin
- 19 2.5 Wiring
- 19 2.5.1 General Purpose or Non-Incendive
- 20 2.5.2 Intrinsically Safe
- 20 2.5.3 Explosion Proof
- 21 2.6 Configuring the Transmitter
- 21 2.6.1 Bench Configuration
- 22 2.6.2 Menu Traversal and Data Entry
- 22 2.6.2.1 Navigating the Menu
- 22 2.6.2.2 Data Selection
- 23 Digit Entry
- 23 Increment/Decrement
- 24 2.6.2.5 Entering Character Data
- 24 2.6.3 Password Protection
- 25 2.6.4 Menu: Step-By-Step Procedure
- 28 2.6.5 Configuration Menu: Device Setup
- 33 2.7.1 Connections
- 33 2.7.2 Display Menu
- 33 2.7.3 HART Revision Table
- 33 2.7.3.1 Model R
- 34 2.7.4 HART Menu
- 36 3.1 Description
- 36 3.2 Theory of Operation
- 36 3.2.1 Pulse Burst Radar
- 37 3.2.2 Equivalent Time Sampling
- 37 3.3 Configuration Information
- 37 3.3.1 Bottom Blocking Distance Description
- 39 3.3.2 Echo Rejection
- 39 3.3.3 Volumetric Capability
- 39 Vessel Types
- 41 3.3.3.2 Configuration Using Custom Table
- 41 3.3.4 Reset Function
- 42 3.4 Troubleshooting and Diagnostics
- 42 3.4.1 Diagnostics (Namur NE 107)
- 44 3.4.2 Diagnostic Indication Simulation
- 44 3.4.3 Diagnostic Help
- 46 3.4.4 Diagnostic Indicator Table
- 48 Shooting Capabilities
- 48 3.4.5.1 Echo History Setup
- 48 3.4.5.2 Event History
- 48 3.4.5.3 Context-sensitive Help
- 48 3.4.5.2 Trend Data
- 49 3.5 Agency Approvals
- 50 3.5.1 Agency Drawing & Entity Parameters
- 52 3.6 Replacement Parts
- 53 3.7 Specifications
- 53 3.7.1 Functional – Transmitter
- 54 3.7.2 Functional – Environmental
- 55 3.7.2.1 Safe Operating Area
- 55 3.7.2.2 Supply Voltage
- 55 3.7.3 O-ring (seal) Selection Chart
- 56 3.7.4 Functional – Antenna
- 56 Pressure/Temperature Rings
- 57 3.7.6 Physical
- 58 3.8 Model Numbers
- 58 3.8.1 PULSAR Model R96 Radar Transmitter
- 59 3.8.2 Radar Antennas – Dielectric Rod
- 60 3.8.3 Radar Antennas – Horn
- 61 4.1 Echo Rejection