42 TECHNICAL DATA
Electrical system
The electrical system operates at 12 volts and the electrical circuits are protected by fuses to prevent overload damage to the system and its components.
Equipment
The loading equipment consists of the loader lift arms with an integrated mechanical or hydraulic quick-change receptacle, lifting and tipping cylinders and the appropriate attachments.
3.2 Loader data
Engine
4-cylinder Perkins diesel engine
Output
24,6 kW / 34 hp at 2800 rpm
SAE rating according to ISO9249
Type 404 D – 15 water-cooled
Capacity 1508 cm³ (92 inch³)
The loader is equipped with a rollover protective structure
(ROPS).
Steering
Fully hydraulic center-pivot steering
Rotating angle
Turn angle
12°
45°
Electrical system
Working voltage
Battery
Drive (driving speed)
1. gear
0 – 7 km/h
2. gear
0 – 20 km/h
12 volts
77 Ah
0 – 4.35 mph
0 – 12.43 mph
W L 25 Canopy
TECHNICAL DATA 43
Hydraulics
Driving hydraulics
Flow rate
78 l/min
Working pressure 450 bar
Working hydraulics
Flow rate
45 l/min
Working pressure 185 bar
Steering hydraulics
Flow rate
45 l/min
Working pressure 175 bar
Weight specifications
Operating weight
Permissible total weight
Permissible axle load per axle
Permissible payload with shovel
Permissible payload with pallet fork
20.61 gallons/min
6527 psi
11.89 gallons/min
2683 psi
11.89 gallons/min
2538 psi
2380 kg 5247 lb
3000 kg 6614 lb
1600 kg 3527 lb
620 kg 1477 lb
567 kg 1351 lb
Vibrations (weighted effective value)
Upper extremities no more than
2.50 m/s² 8.19 ft/s²
Feet or seat surface no more than
0.80 m/s² 2.64 ft/s²
Noise values
Average LwA measured at the operator‘s ear 100 dB(A)
Guaranteed LwA measured at the operator‘s ear 103 dB(A)
Specified LpA measured at the operator‘s ear
85 dB(A)
