Using the Product Safely
Safety Instructions
This guide explains how to install the projector on a lighting track using the Lighting Track Mount.
Make sure you read this guide carefully to use the installation mounts and the projector safely. Incorrect handling that ignores instructions in this guide could damage this product or could result in personal injury or property damage. Keep this installation guide at hand for future reference.
Regarding how to handle the projector, read the
User's Guide
and
Safety Instructions
supplied with your projector and follow the instructions in these documents.
Safety Indications
The documentation and this product use graphical symbols to show how to use this product safely and correctly to prevent injury to customers and others, and damage to property.
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.
Symbol
Warning
Caution
Explanation
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
General Information Indications
Symbols Explanation
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
Symbol indicating related or useful information c
Precautions on Installing the Projector
Warning
Installing the projector on a lighting track should only be performed by a professional with the necessary skills and know-how.
If installation work is not carried out correctly, the mount or the projector could fall causing injury or accident to occur.
Follow the instructions in this guide when performing installation work.
If the instructions are not followed, the mount or the projector could fall causing injury or accident to occur.
Installation should be performed by at least two people. Also, make sure you have a secure, stable footing so that you do not drop the mount or the projector.
1
Using the Product Safely
Warning
Make sure you turn off the lighting track before performing work.
If you perform work while the lighting track is turned on, an electric shock could occur.
Make sure you attach the safety wire supplied with the projector to prevent the mount from falling due to earthquakes or vibrations.
Do not attach anything to this mount except for a projector from EPSON.
Otherwise, the mount may falls and could cause death or personal injury.
Note the following when handling the power cable. Otherwise, it could cause a fire or electric shock.
•
Do not handle the plug with wet hands
•
Do not use a damaged or modified power cable
•
Do not apply excessive force to the power cable
•
Do not trap the cable between parts of the mount and so on during installation
When installing, do not pull or apply excessive force to the cable connected to the projector.
Do not wind cables around the projector or the mount.
When wiring cables and so on, route the cables so that it avoids the screws and bolts.
If the cables come into contact with screws or bolts, it could cause a fire or electric shock to occur.
Make sure you tighten the screws or bolts completely when installing.
If they are not tightened completely, the mount or the projector could fall causing injury or accident to occur.
Never loosen the screws or bolts after installation.
Make sure that you check for any loose screws or bolts on a regular basis, and if any are loose, tighten them completely. If they are not tightened completely, the mount or the projector could fall causing injury or accident to occur.
When securing the mount, do not use adhesives to prevent the screws from loosening, and do not use lubricants, oils, and so on.
If you use adhesives to prevent the screws from loosening, or if you use things such as lubricants or oils, the mount or the projector case may crack causing an injury or an accident.
Do not hang from the mount or the projector, and do not place heavy objects on them.
Otherwise, the mount or the projector may fall and could cause death or injury.
Do not apply excessive force to the projector or the mount when installing.
Otherwise, the mount or the projector may be damaged and could cause death or injury.
Do not install in the following situations. Contact your local dealer or Epson Service Call
Center.
•
If the product has been dropped or damaged before or during installation
•
If the mount is abnormal or damaged
2
Using the Product Safely
Warnings and Cautions on the Installation Locations
Warning
Only install on lighting tracks that support installation for this mount.
Otherwise, the mount or the projector may fall and could cause death or injury.
Do not attach to the lighting track in the following ways.
Otherwise, the lighting track could be damaged. Also, the mount or projector may fall and cause an injury or accident to occur.
•
Lighting tracks attached to walls, floors, or inclined locations
•
Lighting tracks attached to un-reinforced ceilings
•
Lighting tracks that are hung from pipes
•
Lighting tracks that are built-in to the ceiling
Do not install or use the projector in locations where it could be exposed to rain or water, such as outdoors, in baths or shower rooms.
Otherwise, it could cause a fire or electric shock.
Do not use the projector in a location subject to combustible or explosive gas.
If the inside of the projector gets too hot, it could ignite and cause a fire.
Do not cover the projector's air intake vent or air exhaust vent.
If either of the vents are covered, the projector's internal temperature could rise and cause a fire.
Caution
Do not install the projector in a location outside the projector's operating temperature range.
Such an environment may damage the projector.
Install it away from air outlets such as air conditioners.
If the air from an air conditioner and so on flows directly over the projector, the temperature rises and the projector may not operate correctly.
Install it away from fluorescent lights.
Some kinds of fluorescent lights could interfere with the remote control of the projector.
Install it in a location where strong light such as fluorescent light and direct sunlight does not shine on the remote receiver.
If strong rays of light shine on the remote receiver, remote control operations may not be performed correctly.
Make sure you install the projector in a location free from excessive dust and humidity to prevent the lens or internal components from becoming dirty.
3