Preparing the Projector. Epson V12H933W20, EV100, LightScene EV-100, V12H933B20, LightScene EV-105, EV105, ELPMB54 Lighting Track Mount
Add to my manuals
20 Pages
advertisement
▼
Scroll to page 2
of 20
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
How many people are required for installation?
Installation should be performed by at least two people.
What should be done before performing any work?
Make sure you turn off the lighting track before performing work.
How to prevent the mount from falling due to earthquakes or vibrations?
Make sure you attach the safety wire supplied with the projector to prevent the mount from falling due to earthquakes or vibrations.
What should be done when securing the mount?
Make sure you tighten the screws or bolts completely when installing.
What are the consequences of not tightening the screws or bolts completely?
If they are not tightened completely, the mount or the projector could fall causing injury or accident to occur.
Is it required to use adhesives, lubricants, oils, etc. to prevent the screws from loosening?
Do not use adhesives to prevent the screws from loosening, and do not use lubricants, oils, and so on.
Why should adhesives and lubricants not be used?
Using adhesives to prevent the screws from loosening, or if you use things such as lubricants or oils, the mount or the projector case may crack causing an injury or an accident.
Is it allowed to hang from the mount or the projector, or place heavy objects on them?
Do not hang from the mount or the projector, and do not place heavy objects on them.
What is the consequence of applying excessive force to the projector or the mount during installation?
The mount or the projector may be damaged and could cause death or injury.