advertisement
User Guide MOUSE CONTROL
MOUSE CONTROL
You may control the computer mouse functions using the remote control.
In order to enable this function, connect a USB cable between the computer and the projector. Ensure that the PC has an operating system that supports USB (Windows™ 98 2nd edition or newer).
As long as the menu system on the projector is not activated, the tracker ball on the remote control will now emulate the mouse movements. When the menu system is activated, the tracker ball is used for menu navigation. (See menu system chapter).
Point the remote control directly at the IR receiver in the front or in the rear. Move the mouse pointer by rolling the tracker ball in the direction required. The LEFT key emulates the left mouse key, while the RIGHT key emulates the right mouse key.
The pointer movement may not be as smooth as you are used to with you ordinary mouse, due to the reduced bandwidth of the infrared remote control connection.
MGP D5 37
advertisement