advertisement
![USING THE UNIT SAFELY. Roland Fantom-X8, Fantom-X6, Fantom-X7 | Manualzz USING THE UNIT SAFELY. Roland Fantom-X8, Fantom-X6, Fantom-X7 | Manualzz](http://s1.manualzz.com/store/data/000867317_1-eaa1dfd8a16110459c53e18e62b70771-360x466.png)
Fantom-X-V2_e.book 3 ページ 2006年4月13日 木曜日 午後5時24分
USING THE UNIT SAFELY
Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.
The
●
symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
001
• Before using this unit, make sure to read the instructions below, and the
Guide to the Added Functionality.
..................................................................................................
002a
• Do not open or perform any internal modifications on the unit.
..................................................................................................
003
• Do not attempt to repair the unit, or replace parts within it (except when this guide provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
..................................................................................................
004
• Never use or store the unit in places that are:
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..................................................................................................
011
• Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
..................................................................................................
013
• In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit.
..................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..................................................................................................
023
• DO NOT play a CD-ROM disc on a conventional audio CD player. The resulting sound may be of a level that could cause permanent hearing loss. Damage to speakers or other system components may result.
..................................................................................................
106
• Never climb on top of, nor place heavy objects on the unit.
..................................................................................................
3
advertisement
Related manuals
advertisement
Table of contents
- 3 USING THE UNIT SAFELY
- 4 Important Notes
- 5 Contents
- 8 Check the contents of the package
- 9 Updating the Fantom-X
- 9 What is the FANTOM-X Audio Track Expansion Kit?
- 9 Items required for performing the update
- 9 Cautions when performing the update (Important)
- 10 Update procedure
- 11 Verifying the update
- 12 Main features
- 13 Using audio tracks
- 13 What are audio tracks?
- 14 To access the Audio Track Edit screen
- 14 To access the Audio Track Mixer screen
- 15 Items in the Audio Track Edit screen
- 16 Editing audio tracks (Audio Track Edit screen)
- 16 Moving a sample event (Move)
- 16 Selecting and auditioning a sample event (Preview)
- 16 Using the pads to mute audio tracks (Mute/Solo)
- 17 Viewing a list of markers (Marker List)
- 17 Opening the Loop/Locate window (Loop/Locate)
- 17 Inserting a sample event at a specified location (Insert)
- 18 Deleting the selected sample event from an audio track (Delete)
- 18 Copying a sample event (Copy)
- 18 Unloading a sample (Unload Sample)
- 18 Combining the contents of the tracks into one audio track (Mixdown)
- 19 Erasing audio tracks (Clear)
- 20 Naming an audio track (Track Name)
- 20 Switching the display mode
- 20 Zooming In and Zooming Out in the display
- 20 Editing MIDI tracks
- 21 Items in the Audio Track Mixer screen
- 22 Controlling the audio tracks (Audio Track Mixer screen)
- 22 Controlling the audio track settings
- 23 Using the knobs to control the mixer
- 23 Opening the Loop/Locate window (Loop/Locate)
- 23 Using the pads to mute audio tracks (Mute)
- 24 Recording an audio track
- 24 Recording an audio track (SOLO/RE-SAMPLING)
- 25 Combining multiple audio tracks into one track (AUDIO MERGE)
- 26 Saving your audio tracks
- 27 Using the Skip Back Sampling function
- 27 What is Skip Back Sampling?
- 27 Using Skip Back Sampling
- 28 Editing the data created by Skip Back Sampling
- 28 Isolating the desired portion of the sampled data (Start Beat/End Beat)
- 28 Cancelling the sample (Skip Back Cancel)
- 28 Assigning the sampled waveform to the keyboard or a pad (Assign to Keyboard/Pad)
- 29 Assigning the sampled waveform to an audio track (Assign to Audio Track)
- 30 Multisample editing functions
- 30 Creating a multisample
- 31 Creating a multisample in the Patch Edit screen
- 31 Creating a multisample in the Create Multisample screen
- 33 Editing a multisample
- 33 About the Multisample Edit screen
- 34 Selecting the notes to edit
- 34 Changing the multisample assigned to a tone (List)
- 34 Erasing the data from the selected region of notes (Erase)
- 34 Assigning a sample to the selected region (Assign)
- 35 Copying a sample from a key to another key (Copy)
- 35 Opening the Tone Switch/Select window (Tone Sw/Sel)
- 35 Moving the split point (Split Point)
- 36 Returning a multisample to the last-written state (Reload)
- 36 Erasing all notes (Erase All)
- 36 Replacing the sample of the current zone (Sample Select)
- 37 Specify the original key (Org Key) of the sample
- 37 Sorting samples in the order of their original key (Sort)
- 37 Moving all samples to left or right (Shift)
- 37 Moving the data of the current zone to left or right (Move)
- 38 Saving a multisample
- 39 Sample-related changes
- 39 Extended patch groups
- 39 Saving a sample auto patch
- 39 Bank Select and Program Change Correspondence Chart
- 40 Newly added sample parameters
- 40 Sample BPM calculator (BPM Calc)
- 40 Selecting a sample (Sample Number)
- 40 Changes in the saved sample content (Save All Samples)
- 41 Changes in the Patch/Rhythm Edit screen
- 41 Newly added Patch Overview screen
- 42 Changes due to the upgraded editor software
- 42 Newly added PC mode screen
- 42 Cautions when using S- 700 series sounds with the Fantom-X
- 42 Before you connect the Fantom-X to your computer
- 43 Importing patches and rhythm sets
- 45 Fantom-X Editor System Requirements
- 45 System Requirements (Windows)
- 45 System Requirements (Mac OS)
- 45 About the included USB MIDI driver
- 46 Other changes
- 46 Changes in the Patch Edit screen
- 47 Changes in the Performance Mixer screen
- 47 Changes in the Performance Layer screen
- 47 Newly added Layer List window
- 48 Changes in the Key Range window
- 48 Playing different sounds across the keyboard (Split)
- 48 Changes in the Song Edit screen
- 49 Changes in the Song List screen
- 49 Deleting a Song
- 49 Using the pads for realtime erase
- 50 CC Filter added to the Microscope
- 50 Improved functionality for step recording
- 50 Changes in the demo song loaded when you start up the Fantom-X
- 51 Improved functionality in Live Setting
- 51 Registering a song file in a Live Setting
- 52 Recalling a song file you registered
- 52 Switching the font
- 52 Removing the text
- 52 Improvements in Arpeggio functionality
- 52 Using the pads to switch arpeggio styles
- 53 Changing the arpeggio styles assigned to the pads
- 53 Improvements in Chord Memory functionality
- 53 Using the pads to switch chord forms
- 54 Changing the chord forms assigned to the pads
- 54 Changes in the librarian
- 55 New shortcut from the Input Setting screen to MFX Edit
- 55 New parameters available for the assignable switches
- 56 Newly added DIMM check function
- 57 Index