Factory Defaults. Buffalo Technology TSXE80TLR5, TS-RXL, HD-HGLAN Series
Add to my manuals
157 Pages
advertisement
Factory Defaults
The following settings are factory defaults for the TeraStation.
Username
Password
Shared Folders
DHCP Client admin password
“share” (for both Windows and Macintosh computers). The recycle bin is set to
[Enabled] on “share” by default.
Normally, the TeraStation will get its IP address automatically from a DHCP server on the network. If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the TeraStation).
Subnet Mask: 255.255.0.0
Registered Group
Microsoft Network Group
Setting
Ethernet
Frame Size
AFP
FTP
NTP
PrintServer
WebAccess
Time Machine
The TeraStation has 3 default groups: “hdusers”, “admin” and “guest”.
You cannot edit or delete them.
WORKGROUP
1518 bytes
Enabled
Disabled
Automatic
Enabled
Disabled
Disabled
TeraSearch Disabled
RAID Mode RAID 5 mode for TS-XL, TS-XEL (4 hard drives)
RAID 5 mode for TS-RXL (4 hard drives)
RAID 1 mode for TS-WXL/R1
Normal mode for TS-WXL/1D
Note:
To restore factory defaults, refer to “Initialization” on page 70.
TeraStation User Manual 142
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Up to 16TB of storage
- Fast performance with read speeds of up to 110MB/s and write speeds of up to 100MB/s
- RAID 5 and 6 data protection
- Easy to set up and use with a user-friendly web interface
Related manuals
Frequently Answers and Questions
What is the maximum storage capacity of the Buffalo HD-HGLAN Series?
What is the read speed of the Buffalo HD-HGLAN Series?
What data protection features does the Buffalo HD-HGLAN Series offer?
advertisement