Data Backup. Buffalo Technology TSXE80TLR5, TS-RXL, HD-HGLAN Series

If Shared folders on the TeraStation would not suddenly open:

If you map Shared Folders on the TeraStation as a Network Drive, you may suddenly not be able to access TeraStation when the IP address or Workgourp is changed.

In Such a case, follow the instructions on the front of this sheet and open the shared folder on the TeraStation by using

NAS Navigator2.

Note:• On Mac OS, TeraStation is mounted as a drive icon on the desktop, or displayed in the sidebar on the Finder.

• If the problem still persists after you tried the procedures described above on Mac OS, select [System] - [Storage]

- [Disks] - [Check Disk] - [Delete any hidden, non-essential MacOS dedicated files] on the Web Admin interface, and click [Check].

If a shared folder does not open even though NAS Navigator2 recognizes the TeraStation

If power outage occurred or the AC cable is unplugged while the TeraStation is ON, the TeraStation's firmware may be corrupted and shared folders may not open (You can search for folders on NAS Navigator2 but they do not open).

Note: In such a case, TeraStation Name displayed on NAS Navigator2 or Web Admin interface is displayed as TS-XL-

EM*** (the example of TS-XL Series)*** expresses last 3 digits of the TeraStation's MAC address

In such a case, download the latest firmware from BUFFALO's website (www.buffalotech.com) and update it.

Data Backup

While using the TeraStation, you may loose your important data due to sudden accidents, hard disk failure, or accidental misoperation. It is important to backup your data to recover data or minimize losses in such a case.

Use Mass Storage class hard disk manufactured by BUFFALO (such as TeraStation/LinkStation and a USB external hard disk) as Backup Targets.

GPL Information

The source code for Buffalo products that use GPL code is available at http://opensource.buffalo.jp/ .

TeraStation User Manual 151