<b>Maintenance </b>. Wacker Neuson BH 24 Low Vib RS, BH24, BH 24 Low Vib, BH 65, BH23, BH 23, BH 24, BH 23 SJT
Add to my manuals
68 Pages
advertisement
11 Maintenance
11 Maintenance
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety.
WARNING
Danger of poisoning by exhaust fumes.
Exhaust fumes contain toxic carbon monoxide that can lead to unconsciousness or death.
f Carry out maintenance work only when the engine is off.
11.1
Maintaining the emission control system
Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair establishment or individual; however, warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson.
The use of service parts that are not equivalent in performance and durability to authorized parts may impair the effectiveness of the emission control system and may have a bearing on the outcome of a warranty claim.
11.2
Maintenance personnel qualifications
Qualifications for maintenance work
The maintenance work described in this operator's manual may be performed by any responsible user unless otherwise stated.
Some maintenance work may only be performed by specially trained personnel or by the service staff of your Wacker Neuson contact — these are specifically noted.
39
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Foreword
- 6 Introduction
- 6 2.1 Means of representation for this operator's manual
- 7 2.2 Wacker Neuson representative
- 7 2.3 Described machine types
- 8 2.4 Identification of the machine
- 9 Safety
- 9 3.1 Principle
- 12 3.2 Qualification of the operating personnel
- 13 3.3 Protective gear
- 14 3.4 Transport
- 15 3.5 Operating safety
- 17 3.6 Safety during the operation of hand machines
- 17 3.7 Safety during the operation of combustion engines
- 19 3.8 Maintenance
- 21 3.9 Safety devices
- 22 Safety and information labels
- 24 Scope of delivery
- 25 Structure and function
- 25 6.1 Application
- 25 6.2 Functional description
- 26 Components and operator's controls
- 28 Transport
- 29 Initial start up
- 30 Use and operation
- 30 10.1 Prior to starting the machine
- 31 10.2 Adjusting the machine
- 32 10.3 Changing tools
- 33 10.4 Starting up
- 34 10.4.1 Starting the engine
- 37 10.5 Operating the machine
- 38 10.6 Decommissioning
- 39 Maintenance
- 39 11.1 Maintaining the emission control system
- 39 11.2 Maintenance personnel qualifications
- 40 11.3 Maintenance schedule
- 40 11.4 Maintenance work
- 40 11.4.1 Cleaning machine
- 41 11.4.2 Topping up with fuel
- 43 11.4.3 Checking/cleaning air cleaner
- 44 11.4.4 Lubricating the machine
- 45 11.4.5 Checking/cleaning/replacing spark plug
- 46 11.4.6 Checking the tool holder for wear
- 47 Malfunctions
- 48 Storage
- 49 Accessories
- 49 14.1 Truck
- 51 Technical data
- 51 15.1 BH
- 53 15.2 BH
- 56 15.3 BH
- 58 Emission control systems information and warranty
- 58 16.1 Emission control system background information
- 59 16.2 Limited defect warranty for Wacker Neuson emission control systems
- 63 Glossary
- 63 17.1 Use of oxygenated fuels
- 65 EC Declaration of Conformity