<b>Accessories </b>. Wacker Neuson BH 24 Low Vib RS, BH24, BH 24 Low Vib, BH 65, BH23, BH 23, BH 24, BH 23 SJT
Add to my manuals
68 Pages
advertisement
14 Accessories
14 Accessories
There is a wide range of accessories available for the machine.
For more information on the individual accessories, visit the following website: www.wackerneuson.com.
14.1
Truck
Item Designation
1 Hanging device
2 Guide rod
3 Tool holder
Proper use
The truck must only be used for the transport of Wacker Neuson large hammers and the required tools.
The truck must not be used for the following:
Transporting people.
Transporting other machines except Wacker Neuson large hammers.
The truck must not be attached to vehicles.
49
14 Accessories
Placing hammer on the truck
CAUTION
Insufficient stability of the truck.
Injury or damage caused by the truck tipping over or rolling off when the hammer is placed on it.
f Place truck on a level surface.
f Secure truck against rolling off and tipping over.
1. Switch off the machine.
2. Remove tool from the tool holder.
3. Clean the truck's guide rod.
4. Insert hammer with the tool holder on the guide rod and rest on the handles of the truck.
5. Insert tool in the tool holder.
50
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Foreword
- 6 Introduction
- 6 2.1 Means of representation for this operator's manual
- 7 2.2 Wacker Neuson representative
- 7 2.3 Described machine types
- 8 2.4 Identification of the machine
- 9 Safety
- 9 3.1 Principle
- 12 3.2 Qualification of the operating personnel
- 13 3.3 Protective gear
- 14 3.4 Transport
- 15 3.5 Operating safety
- 17 3.6 Safety during the operation of hand machines
- 17 3.7 Safety during the operation of combustion engines
- 19 3.8 Maintenance
- 21 3.9 Safety devices
- 22 Safety and information labels
- 24 Scope of delivery
- 25 Structure and function
- 25 6.1 Application
- 25 6.2 Functional description
- 26 Components and operator's controls
- 28 Transport
- 29 Initial start up
- 30 Use and operation
- 30 10.1 Prior to starting the machine
- 31 10.2 Adjusting the machine
- 32 10.3 Changing tools
- 33 10.4 Starting up
- 34 10.4.1 Starting the engine
- 37 10.5 Operating the machine
- 38 10.6 Decommissioning
- 39 Maintenance
- 39 11.1 Maintaining the emission control system
- 39 11.2 Maintenance personnel qualifications
- 40 11.3 Maintenance schedule
- 40 11.4 Maintenance work
- 40 11.4.1 Cleaning machine
- 41 11.4.2 Topping up with fuel
- 43 11.4.3 Checking/cleaning air cleaner
- 44 11.4.4 Lubricating the machine
- 45 11.4.5 Checking/cleaning/replacing spark plug
- 46 11.4.6 Checking the tool holder for wear
- 47 Malfunctions
- 48 Storage
- 49 Accessories
- 49 14.1 Truck
- 51 Technical data
- 51 15.1 BH
- 53 15.2 BH
- 56 15.3 BH
- 58 Emission control systems information and warranty
- 58 16.1 Emission control system background information
- 59 16.2 Limited defect warranty for Wacker Neuson emission control systems
- 63 Glossary
- 63 17.1 Use of oxygenated fuels
- 65 EC Declaration of Conformity