ESD=electrostatic discharge. Electrolux Floor-mounted stoves

1.

ESD=electrostatic discharge

As the single electronic interfaces are not protected internally against statical electricity and are partially open, you must pay attention to that, in case of a repair, there will be a potential compensation via the housing of the appliance (touch it) in order to neutralize a possible charging and to prevent a damaging of the affected electronic interface.

You also have to be careful with those electronics delivered as spare parts, which have to be put out of the ESD protective package only after a potential compensation (discharge of possible statical electricity).

If a potential compensation with an existing static electricity is not executed, it does not mean that the electronic is demaged directly. Consequential damages may result due to the damaging of internal structures which arise only in case of load through temperature and current.

Endangered are all assembly groups which are provided with control entries, wire paths lying open and free-accessible processors.

DGS-TDS-N 05.09 A. B. © Electrolux - 3 599 527 691 EN