FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights for decorating your label.
The following Frame settings are available:
OFF VINE
ROUND
BANNER
NAMEPLATE
DOT
DIAMOND
SLANT
The default Frame setting is OFF. If any setting other than OFF is selected, the Frame indicator ( ) on the right side of the display lights up.
☞ If the ON Underline setting has been chosen when a frame is selected, the
Underline setting changes back to OFF and the text is framed.
To change the Frame setting:
1
2
3
Hold down
Code
and press
ABC
9
once. The currently selected Frame setting appears in the display.
Keep
Code
held down and continue pressing
ABC
9
until the desired setting appears in the display.
Release
☞
Code
to apply the selected Frame setting to the entire text.
The Frame indicator lights up if any setting other than OFF is selected.
60
EXAMPLE
To select the NAMEPLATE Frame setting:
1 Hold down once.
Code
and press
ABC
9
Auto A
A
A
B
C
Caps
F R A M E
O F F
A A A
A
A
Wide
ABC
A Length
ABC
2 Keep
Code
held down and continue pressing
ABC
9
until the NAMEPLATE
Auto
Frame setting is displayed.
Caps
A
A
A
A
F R A M E
N A M E P L A T E
A A A
B
C
A
Wide
A Length
ABC
ABC
3 Release .
61
