45 ft (13.7 m) Tower Kit. Air Breeze battery charging wind turbine

45 ft (13.7 m) Tower Kit

The 45 ft (13.7 m) Tower Kit includes tower clamp/guy wire assemblies and all necessary hardware and fasteners to erect a 45 ft tilt-up tower using Schedule

40 steel pipe or tubing with an outside diameter of 1.875 inch. See Fig. 5.

Note: Anchors and pipe or tubing are not furnished.

Marine Tower Kit

The Marine Tower Kit is specifically designed to aid mounting

the turbine on a boat deck. Kit includes powdercoated aluminum mast and stays, vibration damping mounts and all necessary marine grade hardware to install the kit. See Fig. 6.

45' AIR TOWER x2

8x

16x

3x

Fig. 5. 45 ft (13.7 m) Tower Kit

IMPORTANT: User manuals for towers and tower kits are available online at www.primuswindpower.com. Primus Wind Power recommends reviewing them to make an appropriate tower selection for your AIR wind turbine.

Fig. 6. Marine Tower Kit

AIR Owner’s Manual 18