WIRING OPTIONS. Air Breeze battery charging wind turbine

AIR Wind Turbine Wiring Options

The recommended way to connect the turbine to your battery bank is to wire the turbine directly to its own set of battery posts; allowing the turbine to operate independently. The AIR turbine’s internal regulator will monitor the battery and maintain the charge as necessary.

Figs. 8 and 9 represent typical single turbine installations. Fig. 9 includes an up-tower junction box for UL (Underwriters Laboratory) compliance.

Contact Primus Wind Power for more information about this configuration.

Fig. 8. Single Turbine Installation

User Power

Center Junction

Box

Battery

Disconnect

Fuse or

Breaker

Amp

Meter

Stop

Switch

Turbine Positive

Red Lead

Chassis

Ground

Turbine Negative

Black Lead

Battery Bank

Ground

Rod

AIR BREEZE

Wind Turbine

Generator

Tower

Tower Ground

Turbine Ground

Green Lead

Earth Ground

AIR Owner’s Manual 20