Configure ADSL Settings. Edimax ED-1508

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

Configure ADSL Settings

Note: For information about how to install ADSL filters, see the Setup

Manual.

NETGEAR recommends that you use the Setup Wizard to automatically detect and configure your ADSL settings. This usually works fine. However, if you have technical experience and are sure of the multiplexing method and virtual circuit number for the virtual path identifier

(VPI) and virtual channel identifier (VCI), you can specify those settings here.

Note: NETGEAR recommends using the Setup Wizard to automatically configure the ADSL settings.

 If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:

1. From the main menu, select ADSL Settings to display the ADSL Settings screen.

a. In the Multiplexing Method drop-down list, select LLC-based or VC-based.

b. For the VPI, type a number between 0 and 255. The default is 8.

c. For the VCI, type a number between 32 and 65535. The default is 35.

d. Click Apply.

Router Internet Setup