Configuration Summary (Telecommuter Example). Edimax ED-1508

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

The LAN addresses used in this example are as follows:

Device

DGND3300v2

FVL328

LAN IP Address

10.5.6.1

172.23.6.1

LAN Subnet Mask

255.255.255.0

255.255.255.0

a. Enter toFVL328 for the connection name.

b. Enter fvl328.dyndns.org for the remote WAN's IP address.

c. Enter the following:

• IP Address: 172.23.9.1

• Subnet Mask: 255.255.255.0

5. Configure the FVL328 as in the gateway-to-gateway procedures for the VPN Wizard (see

Set Up a Gateway-to-Gateway VPN Configuration on page 90), being certain to use

appropriate network addresses for the environment.

a. Enter toDG834 for the connection name.

b. Enter dg834g.dyndns.org for the remote WAN's IP address.

c. Enter the following:

• IP Address: 10.5.6.1

• Subnet Mask: 255.255.255.0

6. Test the VPN tunnel by pinging the remote network from a computer attached to the

DGND3300v2.

a. Open the command prompt (Start -> Run -> cmd)

b. Type ping 172.23.9.1

If the pings fail the first time, try the pings a second time.

Configuration Summary (Telecommuter Example)

The configuration in this section follows the addressing and configuration mechanics defined by the VPN Consortium. Gather the necessary information before you begin configuration.

NETGEAR VPN Configuration

150