10.5 Variable and Fixed Audio Output. Philips BDH5011

User Manual BDH5011

10.5 Variable and Fixed Audio

Output

Setting Output Using OSD

You can set the type of output this display outputs from its audio output jack located in the rear of the display. By using an OSD based switch, you can easily choose between variable or fixed audio outputs.

To set the audio output setting:

1. Press the MENU +/- keys on the remote or the front control panel.

2. Use the ADJ +/- keys to navigate to SOUND

OSD sub-menu.

3. Use the MENU +/- keys to select the

AUDIO OUTPUT option.

4. Use the ADJ +/- keys to change setting between FIXED or VARIABLE.

AUDIO OUTPUT

Sets the type of audio output sent from the audio output jacks located in the rear of display.

• VARIABLE

When set to Variable, audio output is affected by the display’ sinternal audio controls including bass, treble, surround, BBE, bass extension, and volume.

• FIXED

When set to Fixed, the audio output bypasses the display’s internal audio control so that functions such as bass, treble, surround, BBE, bass extension, and volume controls have no effect.

10.6 Sound Adjustments

Sound Adjustments Using OSD

Sound adjustments are available to enhance the sound performance of the display.These

adjustments will affect the display’s built-in speakers and the AUDIO OUTPUT jacks when set to ‘Variablel’ (see above section).To access sound adjustments:

1. Press the MENU +/- keys on the remote or the front control panel.

2. Use the ADJ +/- keys to navigate to SOUND

OSD sub-menu.

3. Use the MENU +/- keys to select the various options described in this section.

36