Rear Panel Connectors. Apple WS 8150, Power Macintosh 8100/80 and 8100/80AV
Add to My manuals130 Pages
advertisement
▼
Scroll to page 2
of
130
Basics Rear Panel Connectors - 13
Rear Panel Connectors
The figure on the following page shows a Power Macintosh
8100 computer with a 4 MB Video Card installed. The AV version of the Power Macintosh 8100 would have a Power
Macintosh AV Card installed instead of the 4 MB Video Card.
In addition to a DB-15 connector, the AV Card includes an S-
Video Input and an S-Video Output port.
Basics Rear Panel Connectors - 14
Power-On
SCSI
Ethernet
HDI-45 Video
Printer
Modem
ADB
Sound Out
Sound In
Power Macintosh 8100 Rear Panel
DB-15
advertisement
Related manuals
Frequently Answers and Questions
What is the primary operating system for PowerPC processor-based Macintosh computers?
System 7, which has been optimized for the PowerPC processor.
What are the benefits of using a PowerPC-based Macintosh system?
It offers compatibility with 680x0-based systems, runs both 680x0 and native PowerPC applications simultaneously, and provides two to four times the performance of the fastest 68040- and 80486-based personal computers.
What should be done if a Power Macintosh system does not power up?
Reset the logic board.
Can composite RAM SIMMs be used in Power Macintosh computers?
No, noncomposite RAM SIMMs only can be used, and they must be installed in like pairs.
What is the purpose of the HDI-45 connector on the logic board?
It connects to a variety of devices, including audio input and output devices, video output devices, and monitor ID sense lines.
What is Apple RAID software?
It protects data from loss during a disk failure and enhances the speed of data storage and retrieval by using disk mirroring or disk striping.
What is the CPU of the 8100/80 and 8150 models?
80, 100 or 110 MHz PowerPC 601 RISC microprocessor.
What is the cache memory of the 8100/80 and 8150 models?
32K of on-chip cache memory.
What system software version is required for the 8100/80 and 8150 models?
System software version 7.1.2 or later.
What is the CPU of the 8100/100, 8100/110 and 8150/110 models?
80, 100 or 110 MHz PowerPC 601 RISC microprocessor.
What system software version is required for the 8100/100, 8100/110 and 8150/110 models?
System software version 7.5 or later.
advertisement