Video Card. Apple WS 8150, Power Macintosh 8100/80 and 8100/80AV

Apple WS 8150 is a high-performance workstation designed for demanding professional applications. It features a powerful PowerPC 601 RISC microprocessor, up to 128MB of RAM, and a large hard drive for storing your files and applications. With its advanced graphics capabilities, the WS 8150 is ideal for tasks such as video editing, 3D modeling, and CAD design. It also includes built-in networking capabilities, making it easy to connect to other computers and share files.

Take Apart Video Card - 13

Video Card

Before you begin, remove the top housing.

Caution:

To prevent ESD damage, wear a grounding wriststrap. Review the ESD precautions in Bulletins/

Safety.

Take Apart Video Card - 14

Note

: All Power Macintosh

8100 series computers require that a video card or

PDS termination card be installed in the PDS slot.

This procedure describes how to remove either of these cards.

Take Apart Video Card - 15

1 Push up on the tab that secures the video card to the chassis.

Take Apart Video Card - 16

2 Gently pull out the video card to remove it.

Replacement Caution:

When replacing the card, do not force it into the expansion slot. If the card does not seat properly, remove the card, check the logic board for damage, and try to install the card again.

Related manuals

Frequently Answers and Questions

What is the primary operating system for PowerPC processor-based Macintosh computers?

System 7, which has been optimized for the PowerPC processor.

What are the benefits of using a PowerPC-based Macintosh system?

It offers compatibility with 680x0-based systems, runs both 680x0 and native PowerPC applications simultaneously, and provides two to four times the performance of the fastest 68040- and 80486-based personal computers.

What should be done if a Power Macintosh system does not power up?

Reset the logic board.

Can composite RAM SIMMs be used in Power Macintosh computers?

No, noncomposite RAM SIMMs only can be used, and they must be installed in like pairs.

What is the purpose of the HDI-45 connector on the logic board?

It connects to a variety of devices, including audio input and output devices, video output devices, and monitor ID sense lines.

What is Apple RAID software?

It protects data from loss during a disk failure and enhances the speed of data storage and retrieval by using disk mirroring or disk striping.

What is the CPU of the 8100/80 and 8150 models?

80, 100 or 110 MHz PowerPC 601 RISC microprocessor.

What is the cache memory of the 8100/80 and 8150 models?

32K of on-chip cache memory.

What system software version is required for the 8100/80 and 8150 models?

System software version 7.1.2 or later.

What is the CPU of the 8100/100, 8100/110 and 8150/110 models?

80, 100 or 110 MHz PowerPC 601 RISC microprocessor.

What system software version is required for the 8100/100, 8100/110 and 8150/110 models?

System software version 7.5 or later.

Video Card. Apple WS 8150, Power Macintosh 8100/80 and 8100/80AV

Video Card

Related manuals

Apple

5260/120 Series

Apple

Macintosh TV

Apple

9150

Apple

Macintosh Performa 570 series

Apple

Macintosh LC

Apple

Macintosh LC 630

Apple

LC520

Apple

WS 6150

Apple

LC 550

Macintosh

SE

Apple

SCSI Hard Drive

Frequently Answers and Questions

What is the primary operating system for PowerPC processor-based Macintosh computers?

What are the benefits of using a PowerPC-based Macintosh system?

What should be done if a Power Macintosh system does not power up?

Can composite RAM SIMMs be used in Power Macintosh computers?

What is the purpose of the HDI-45 connector on the logic board?

What is Apple RAID software?

What is the CPU of the 8100/80 and 8150 models?

What is the cache memory of the 8100/80 and 8150 models?

What system software version is required for the 8100/80 and 8150 models?

What is the CPU of the 8100/100, 8100/110 and 8150/110 models?

What system software version is required for the 8100/100, 8100/110 and 8150/110 models?

Table of contents