Power Macintosh 8500 Upgrade. Apple WS 8150, Power Macintosh 8100/80 and 8100/80AV

Upgrades Power Macintosh 8500 Upgrade - 19

Power Macintosh 8500 Upgrade

The Power Macintosh 8500 Upgrade Kit can be used to upgrade a Quadra 800, Quadra 840, or a Power Macintosh

8100. The kit includes everything except:

• The peripherals (such as the hard drive, floppy drive, and CD-ROM drive), which must be transferred from the original unit you are upgrading

• A processor card, which must be purchased separately.

Refer to the appropriate Take Apart chapter (that is, the

Take Apart chapter in the Quadra 800, Quadra 840AV, or

Power Macintosh 8100 manual) for instructions on how to remove the drives from the original unit.

Refer to the Take Apart chapter in the Power Macintosh

8500/WS 8550 manual to see where the peripherals should be installed in the upgraded unit and for instructions on how

Upgrades Power Macintosh 8500 Upgrade - 20 to install the processor card.

Once you have installed all the drives in the upgraded unit and replaced the top housing, copy the serial number from the original unit to the blank serial label on the upgraded unit.