advertisement
Chapter 3: Terminal Menu Operation and Structure
Dial Out/Attempts
Write security: 3; Read security: 5
This value is the number of attempts the Express L128/L128T will make before giving up on the connection. This is effective for manual dialing or dynamic bandwidth calls only. The range is from 1 (def) to 255.
Dial Out/Initial Channels
Write security: 3; Read security: 5
This is the number of B-channels to dial-up on the initial connection. Possible choices are 1 (def) and 2.
Connection List/Bandwidth
The bandwidth parameters that govern this connection are set here.
Bandwidth/On Demand
The parameters under this menu control the data rates required to change bandwidth.
Bandwidth/Mode
Write security: 3; Read security: 5
When this option is set to On, the Express L128/L128T will apply its bandwidth-on-demand features for this Connection List profile. If set to Off, none are performed.
Bandwidth/Idle Timeout
Write security: 3; Read security: 5
This is the number of seconds the ISDN line must be idle before hanging up this connection. A value of 0 (def) means the Express L128/L128T will never drop the link based on the idle timer. The range is 0 to 255.
Bandwidth/Preempt Time
Write security: 3; Read security: 5
Occasionally an application will require to connect to a different location before the current connection’s idle timer has timed out. This causes the application to have to wait for idle timer before it can use the B-channel. This preempt time allows the Connection List that is active to be dropped sooner than the normal idle time. The value ranges from 0 to 255 and is in seconds.
61202.070L1-1 Express L128/L128T User Manual 77
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 18 Setting up the ISDN Line
- 19 Connecting to an Internet Service Provider
- 19 Internet Access using Network Address Translation (NAT)
- 20 Multiprotocol Routing Between Two LANS
- 20 Remote/Home Office Accessing the Corporate LAN
- 24 Chapter 1. Understanding ISDN and the Express L128/L128T
- 24 ISDN Overview
- 24 THE Express L128/L128T
- 25 Applications
- 25 Single User to Corporate LAN
- 26 Network Address Translation (NAT)
- 27 Multiple Users to Internet Service Provider (ISP) using NAT
- 28 Small Office - Home Office (SOHO) to Corporate LAN
- 29 Demand Routing and Bridging with the Express L128/L128T
- 29 Factory Default
- 30 Bridging
- 31 IP Routing
- 32 IPX Routing
- 32 Connection List - Simplifying and Enhancing the Dial Function
- 32 Concurrent Routing and Bridging
- 32 Routing over PPP Bridging
- 33 Network Address Translation Mode
- 33 Front Panel
- 33 LAN Indicators
- 34 WAN Indicators
- 34 Test Indicators
- 35 ISDN Connection
- 36 Ordering ISDN
- 36 Interoperability
- 36 Connecting to the Internet
- 37 Configuration
- 37 Security
- 38 Chapter 2. Installation
- 38 ISDN Network Connection
- 38 Local Area Network Connection
- 39 Telephone Connection (L128T Only)
- 39 Basic Telephone Service
- 39 Supplementary Services
- 39 DTMF Keypad
- 40 Customer Premises Wiring
- 44 Chapter 3. Terminal Menu Operation and Structure
- 44 Terminal Menu Structure
- 44 Configuration
- 46 Status
- 46 Utilities
- 47 Navigating the Terminal Menus
- 47 General Layout
- 47 Menu Path
- 47 Moving Around
- 47 Submenus [+] or [DATA]
- 47 Activation Field <+>
- 47 Editable Data Field
- 47 Read-Only Field
- 48 Navigation with the Keyboard
- 50 Security Levels
- 51 Configuration Menu
- 51 Configuration/System Info
- 51 System Name
- 51 System Location
- 52 System Contact
- 52 Firmware Revision
- 52 System Uptime
- 52 Date/Time
- 53 Configuration/WAN
- 53 WAN/ISDN
- 53 ISDN/Dial Line
- 53 Dial Line/ExpertISDN
- 54 Dial Line/Switch Protocol
- 54 Dial Line/Area Code
- 54 Dial Line/SPID
- 55 Dial Line/LDN 1 or
- 55 ISDN/Leased Line
- 55 Leased Line/Clock Mode
- 55 Leased Line/Channel Rate
- 55 ISDN/NEBEs
- 56 ISDN/FEBEs
- 56 WAN/POTS
- 56 POTS/POTS Assignment
- 56 POTS/NI-1 Conference FI
- 56 POTS/NI-1 Transfer FI
- 56 POTS/Speech Calltype Routing
- 57 Configuration/IP
- 57 IP/IP Address
- 57 IP/Subnet Mask
- 58 IP/Default Gateway
- 58 IP/Static Routes
- 58 Static Routes/Active
- 58 Static Routes/IP Address
- 58 Static Routes/Subnet Mask
- 58 Static Routes/Gateway
- 58 Static Routes/Hops
- 59 Static Routes/Private
- 59 IP/IP Router
- 59 IP Router/Mode
- 59 IP/RIP
- 59 RIP/Mode
- 59 RIP/Protocol
- 60 RIP/Method
- 60 RIP/Direction
- 60 RIP/V2 Secret
- 60 IP/NAT
- 60 NAT/DHCP Mode
- 61 NAT/DHCP Renewal Time
- 61 NAT/Web Server
- 61 IP/DNS
- 61 DNS/Domain Name
- 61 DNS/Server
- 62 IP/UDP Relay
- 62 UDP Relay/Mode
- 62 UDP Relay/UDP Relay List
- 62 UDP Relay List/Relay Address
- 62 UDP Relay List/UDP Port Type
- 63 UDP Relay List/UDP Port 1, UDP Port 2, UDP Port
- 63 IP/Proxy ARP
- 64 Configuration/IPX
- 64 IPX/Mode
- 64 IPX/Network
- 65 IPX/Frame Type
- 65 IPX/Seed Status
- 65 IPX/RIP Timer
- 66 IPX/SAP Timer
- 67 Configuration/Bridge
- 67 Bridge/Mode
- 67 Bridge/WAN IP Bridge
- 68 WAN IP Bridge/Network
- 68 WAN IP Bridge/Netmask
- 68 WAN IP Bridge/Triggered
- 68 WAN IP Bridge/Proxy ARP
- 68 Bridge/WAN IPX Bridge
- 69 WAN IPX Bridge/Network
- 69 WAN IPX Bridge/Frame Type
- 69 WAN IPX Bridge/Seed Status
- 69 WAN IPX Bridge/Triggered
- 69 Bridge/Spanning Tree
- 69 Spanning Tree/Mode
- 70 Spanning Tree/Priority
- 70 Spanning Tree/Maximum Age
- 70 Spanning Tree/Hello Time
- 70 Spanning Tree/Forward Delay
- 70 Spanning Tree/LAN Port
- 70 LAN Port/Active
- 71 LAN Port/Path Cost
- 71 LAN Port/Priority
- 71 Spanning Tree/WAN Port
- 71 WAN Port 0/Active
- 71 WAN Port 0/Path Cost
- 71 WAN Port 0/Priority
- 71 Spanning Tree/WAN Port
- 72 WAN Port 1/Active
- 72 WAN Port 1/Path Cost
- 72 WAN Port 1/Priority
- 72 Bridge/Address Table
- 72 Address Table/Aging
- 72 Address Table/Forward Policy
- 73 Configuration/Security
- 73 Security/Authentication
- 74 Security/When
- 74 Security/Radius Server
- 74 Radius Server/Primary Server
- 74 Radius Server/Secondary Server
- 74 Radius Server/UDP Port
- 74 Radius Server/Secret
- 75 Radius Server/Retry Count
- 75 Security/PPP
- 76 Security/Filter Defines
- 76 Filter Defines /MAC Filter Defines
- 77 Filter Defines /Pattern Filter Defines
- 77 Filter Defines /IP Filter Defines
- 78 Filter Defines /IPX Filter Defines
- 80 Configuration/Connection List
- 81 Connection List/Description
- 81 Connection List/Active
- 81 Connection List/Authentication
- 82 Authentication/Tx Method
- 83 Authentication/Tx Username
- 83 Authentication/Tx Password
- 83 Authentication/Rx Username
- 83 Authentication/Rx Password
- 83 Authentication/Caller ID
- 84 Authentication/Call ID
- 84 Connection List/IP
- 84 IP/Mode
- 84 IP/NAT
- 84 IP/Route
- 85 Route/IP/Net
- 85 Route/Netmask
- 85 Route/Static Route
- 85 Route/Private
- 85 Route/Hops
- 85 Route/Force IP
- 86 IP/RIP
- 86 RIP/Mode
- 86 RIP/Protocol
- 86 RIP/Method
- 86 RIP/Direction
- 86 RIP/Triggered
- 87 RIP/Retain
- 87 Connection List/IPX
- 87 IPX/Mode
- 87 IPX/Remote Network
- 87 IPX/Triggered
- 88 IPX/Retain
- 88 IPX/Type 20 Packets
- 89 Connection List/Bridge
- 89 Bridge/Mode
- 89 Connection List/Probe
- 89 Probe/Active
- 89 Probe/Interval
- 90 Probe/Update Window
- 90 Connection List/PPP
- 90 PPP/Multilink
- 90 Multilink/Mode
- 90 Multilink/Fragment
- 91 Multilink/BACP
- 91 PPP/Compression
- 91 PPP/VJ Compression
- 91 PPP/Max Config
- 92 PPP/Max Timer
- 92 PPP/Max Failure
- 92 Connection List/Dial Out
- 92 Dial Out/Number
- 92 Dial Out/Call Type
- 93 Dial Out/Redial at 56K
- 93 Dial Out/Delay
- 93 Dial Out/Connection Timeout
- 94 Dial Out/Attempts
- 94 Dial Out/Initial Channels
- 94 Connection List/Bandwidth
- 94 Bandwidth/On Demand
- 94 Bandwidth/Mode
- 94 Bandwidth/Idle Timeout
- 94 Bandwidth/Preempt Time
- 95 Bandwidth/Upper Threshold
- 95 Bandwidth/Lower Threshold
- 95 Bandwidth/Min Channels
- 95 Bandwidth/Max Channels
- 95 Bandwidth/Samples
- 95 Samples/Sample Rate
- 96 Samples/Samples
- 96 Samples/Time Between Changes
- 96 Connection List/Filters
- 96 Filters/WAN-to-LAN (In)
- 97 Filters/In Exceptions
- 97 Filters/LAN-to-WAN (Out)
- 98 Filters/Out Exceptions
- 98 Filters/Demand Dial
- 99 Filters/Dem Dial Exceptions
- 100 Configuration/Management
- 100 Management/Telnet
- 100 Telnet/Server Access
- 101 Telnet/User List
- 101 User List/Name
- 101 User List/Authen Method
- 101 User List/Password
- 101 User List/Idle Time
- 101 User List/Level
- 102 Management/SNMP
- 102 SNMP Access
- 102 SNMP/Communities
- 102 Communities/Name
- 102 Communities/Privilege
- 102 Communities/Manager IP
- 102 SNMP/Traps
- 103 Traps/Manager Name
- 103 Traps/Manager IP
- 103 Management/Maint Port
- 103 Maint Port/Password Protect
- 103 Maint Port/Password
- 103 Maint Port/Baud Rate
- 103 Maint Port/Data Bits
- 104 Maint Port/Parity
- 104 Maint Port/Stop Bits
- 104 Configuration/Terminal Mode
- 105 Dial Menu
- 105 Dial/Description
- 105 Dial/Dial
- 106 Dial/Hang Up
- 106 Dial/Status
- 106 Dial/Channels
- 106 Dial/Number
- 107 Status Menu
- 107 Status/Call Sessions
- 108 Call Sessions/Session1 and Call Sessions/Session
- 109 Call Sessions/Spanning Tree
- 109 Status/ARP Cache
- 110 Status/Bridge Table
- 110 Status/IP Routes
- 111 Status/IPX Routes
- 112 Status/IPX Servers
- 112 Status/WAN Stats
- 113 Status/LAN Stats
- 113 Status/IP Stats
- 115 Test Menu
- 115 Test Menu/Echo Request
- 115 Test Menu/Dial Self
- 116 Logs Menu
- 116 Logs/Sys log Host
- 116 Logs/PPP Log
- 117 PPP Log/Active
- 117 PPP Log/Wrap
- 117 PPP Log/Level
- 117 PPP Log/View
- 117 PPP Log/Clear
- 117 Logs/Call Log
- 117 Call Log/Active
- 118 Call Log/Wrap
- 118 Call Log/Level
- 118 Call Log/View
- 118 Call Log/Clear
- 118 Logs/Network Log
- 118 Network Log/Active
- 118 Network Log/Wrap
- 119 Network Log/Level
- 119 Network Log/View
- 119 Network Log/Clear
- 120 Utilities Menu
- 120 Utilities/Ping
- 121 Utilities/Telnet Client
- 121 Utilities/Upgrade Menu
- 121 Upgrade/Transfer Method
- 121 Upgrade/TFTP Host
- 121 Upgrade/Filename
- 121 Upgrade/Status
- 122 Upgrade/Start Transfer
- 122 Upgrade/Abort Transfer
- 122 Upgrade/TFTP Server
- 122 Utilities/Exit
- 124 Chapter 4. Troubleshooting
- 124 If Self-Test Fails
- 124 If the Express L128/L128T does not read Ready
- 130 If you are unable to connect calls
- 132 Chapter 5. Specifications
- 132 Specifications and Features
- 132 Network Interface
- 132 Ethernet Interface (LAN)
- 132 Switch Compatibility
- 132 Dual POTS Interface
- 133 Display
- 133 Environmental
- 133 Physical
- 133 Power
- 134 Appendix A. Loop Status Messages
- 138 Appendix B. Log Messages
- 156 Appendix C. SNMP
- 160 Appendix D. Connector Pinouts
- 162 Appendix E. Terminal Mode Commands
- 166 Appendix F. Frame Relay Firmware Version
- 178 Glossary
- 188 Acronyms
- 190 Index