advertisement
Chapter 3: Terminal Menu Operation and Structure
IP Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here).
IP Routes/TTL - Seconds until address is removed from table or
“zombied.” Value of 999 means route is static.
Status/IPX Routes
Read security: 5
This lists the contents of the Express L128/L128T’s IPX router table.
IPX Routes /Network - Network destination address
IPX Routes /Gateway - Node or Ethernet address of gateway to receive this packet
IPX Routes /Port - Port gateway is located on: local - sent directly to the Express L128/L128T router eth0 - Express L128/L128T’s ethernet port wan0 - Express L128/L128T’s first PPP bundle wan1 - Express L128/L128T’s second PPP bundle idle - non-connected or “spoofed” route used for dial-on-demand
IPX Routes /Use - Number of times the Express L128/L128T has referenced the route
IPX Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here).
IPX Routes/Ticks - Router determined value for representing time packets take to reach the network destination. One tick is equivalent to one-eighteenth of a second.
IPX Routes/TTL - Seconds until address is removed from table.
Value of 999 means route is static.
94 Express L128/L128T User Manual 61202.070L1-1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project