Other Mounting Options. ACTi E31, E34, E33, E32
Add to My manuals33 Pages
ACTi E31 is a 1MP bullet camera with day/night functionality, infrared illumination, basic wide dynamic range, and a fixed lens, making it suitable for various surveillance applications. Its compact and weatherproof design allows for flexible outdoor or indoor installation, and the Ethernet port enables seamless network connectivity. With its image enhancement features, the camera delivers clear and detailed footage even in challenging lighting conditions. The camera also supports Power over Ethernet (PoE), simplifying installation and eliminating the need for additional power outlets.
advertisement
Hardware Manual
Other Mounting Options
In areas with fierce weather conditions, the light bundled bracket can be replaced by a heavy duty outdoor bracket combined with additional mounting accessories.
Below are the optional mounting accessories that you can use with the camera.
Mount Types Accessories
Corner Mount Suitable when mounting the camera on a corner wall.
PAMX-1103 PMAX-0402
Pole Mount
+
Suitable when mounting the camera on a pole.
PAMX-1103 PMAX-0503
+
NOTE:
For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website ( http://www.acti.com/mountingselector ).
The above mounting accessories are not included in the package. Contact your sales agents to purchase.
advertisement
Related manuals
advertisement
Table of contents
- 6 Safety Instructions
- 7 List of Models
- 8 Package Contents
- 9 Physical Description
- 10 Mount the Camera
- 10 Using the Bundled Bracket
- 13 Other Mounting Options
- 14 Waterproof Cable Installation
- 15 installed Network Cable (“Pigtail”)
- 16 Step 2: Prepare the Conduit Gland and Flex Conduit
- 17 Step 3: Install the Ethernet Cable
- 18 Step 4: Connect the Ethernet Cable
- 19 Replace the Pre-Installed Network Cable
- 20 installed Network Cable (“Pigtail”)
- 21 Step 2: Install the New Ethernet Cable
- 23 Basic Connections
- 23 Connecting a Single Camera
- 24 Connecting Multiple Cameras
- 25 Configure the IP Addresses
- 25 Using DHCP Server to Assign IP Addresses
- 27 Using the Default Camera IP Address
- 29 Access the Camera