About Event ID

169

Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List.

s Epson Projector Contact List

Event ID

0432

0435

0434

0482

0484

0485

0433

0481

0483

04FE

0479

04FF

0891

0892

0893

0894

0898

Cause

Failed to start EasyMP Network Projection.

Network communication is unstable.

Cannot play transferred images.

Communication was disconnected from the computer.

EasyMP Network Projection ended unexpectedly.

A system error occurred in the projector.

Cannot find an access point with the same SSID.

The WPA/WPA2 authentication type does not match.

The WEP/TKIP/AES encryption type does not match.

Communication was disconnected because the projector connected to an unauthorized access point.

Failed to acquire DHCP.

Restart the projector.

Remedy

Check the network communication status, and reconnect after waiting for a while.

Restart EasyMP Network Projection.

Check the network communication status, and then restart the projector.

Restart the projector.

Set the computer, the access point, and the projector to the same SSID.

Check that the wireless LAN security settings are correct.

s

Security p.140

Contact your network administrator for more information.

0899 Other communication errors

Check that the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting.

s Wireless LAN - IP Settings

p.139

If restarting the projector or EasyMP Network Projection does not solve the problem, contact your local dealer or the nearest address provided in the Epson

Projector Contact List.

s Epson Projector Contact List

Maintenance

This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.