Adjusting the armpad. Vermeiren D400

D400

2013-06

Adjust the angle of the footplates as follow:

1.

2.

3.

Loosen bolt .

Adjust tube in the desired angle. The angle indication (80°-85 °-90°-95°-100°) is according the dashes .

Retighten the bolt .

3.7 Adjusting the armpad

The armpad of your wheelchair can be adjusted in height and depth. The height of the armpad can be adjusted in 6 positions (Range 75 mm in steps from 15 mm).

Adjust the height and depth of the armpad as follow:

1. Loosen the locking mechanism slightly by turning the star knob

Ⓐ anti-clockwise.

2. Pull on the locking pin

Ⓐ

.

3. Move the armpad, to adjust the height of the armpad. Do this at the same time when pulling on the locking pin

Ⓐ

.

4. Let go of the locking pin

Ⓐ

.

5. Check that the locking pins

Ⓐ are securely fixed.

6. Retighten the locking mechanism by turning the star knob

Ⓐ

clockwise to reduce the play of the armpad.

The depth of the armpad can be adjusted in 3 positions (steps: 42,5 mm).

Depth of the armpad Used holes

Front position Back and middle

Middle position (Standard)

Back position

Hole 2 and 4

Front and middle

Table 4: Depth of armrest

Page 21